The Effect of Under-Drilling and Osseodensification Drilling on Low-Density Bone: A Comparative Ex Vivo Study
Source abstract
Abstract
The aim of this study is to identify a method that can maximize implant primary stability (IPS) and bone density under the controlled drilling conditions of the same diameter and length in low-density bones through an ex vivo study. A total of 87 dental implants were placed with standard drilling, under-drilling, and osseodensification drilling in 13 fresh porcine sternums. The Periotest value and the implant stability quotient were measured to evaluate the primary stability. The difference in the Hounsfield unit (HU) between the hole and peripheral bone up to a distance of 1 mm was measured. Osseodensification and under-drilling technique increased the IPS, compared with conventional drilling technique with statistical significance under the drilling conditions of the same diameter and length. Osseodensification technique with the counter-clockwise direction had higher HU gaps than the standard drilling and osseodensification technique with clockwise direction. Due to the effect of bone densification, the gap of HU was increased by a minimum of 43 HU and a maximum of 180 HU. Within the limitations of this ex vivo study, it was found that the osseodensification technique with counter-clockwise direction is effective to increase IPS and bone mineral density in low-density bone.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental Implant Techniques and Outcomes · Orthopaedic implants and arthroplasty · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Oral and Maxillofacial Surgery, School of Dentistry, Chosun University, Gwangju 61452, Korea
Department of Periodontology, School of Dentistry, Chosun University, Gwangju 61452, Korea
References (40)
Show source-provided references
1. Osseointegration and its experimental background10.1016/S0022-3913(83)80101-2 ↗
2. Osseointegrated titanium implants: Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man10.3109/17453678108991776 ↗
3. Implant micromotion is related to peak insertion torque and bone density10.1111/j.1600-0501.2008.01679.x ↗
4. In vivo bone response to biomechanical loading at the bone/dental-implant interface10.1177/08959374990130012301 ↗
5. Toward an understanding of implant occlusion and strain adaptive bone modeling and remodeling10.1016/S0022-3913(99)70209-X ↗
6. Success and failure rates of cylinder implants in type IV bone10.1902/jop.1993.64.11.1085 ↗
7. Significance of primary stability for osseointegration of dental implants10.1111/j.1600-0501.2005.01201.x ↗
8. The influence of micro-motion on the tissue differentiation around immediately loaded cylindrical turned titanium implants10.1016/j.archoralbio.2005.04.003 ↗
9. Hydroxyapatite coating modifies implant membrane formation. Controlled micromotion studied in dogs10.3109/17453679209154808 ↗
10. Increasing the stability of dental implants: The concept of osseodensification10.1515/bjdm-2017-0023 ↗
11. Early wound healing around endosseous implants: A review of the literature
12. Bone classification: An objective scale of bone density using the computerized tomography scan10.1034/j.1600-0501.2001.012001079.x ↗
13. The excessive loss of Branemark fixtures in type IV bone: A 5-year analysis10.1902/jop.1991.62.1.2 ↗
14. Assessments of trabecular bone density at implant sites on CT images10.1016/j.tripleo.2007.08.007 ↗
15. Maxillary bone mineral density and its relationship to the bone mineral density of the lumbar spine and hip10.1016/S1079-2104(03)00460-8 ↗
16. Bone density assessments of oral implant sites using computerized tomography10.1111/j.1365-2842.2006.01689.x ↗
17. Relationship between the bone density estimated by cone-beam computed tomography and the primary stability of dental implants10.1111/j.1600-0501.2011.02203.x ↗
18. On the evolution of drill-bit shapes10.1016/0378-3804(89)90075-2 ↗
19. Influence of underpreparation on primary stability of implants inserted in poor quality bone sites: An in vitro study10.1016/j.joms.2015.01.029 ↗
20. Undersized implant site preparation to enhance primary implant stability in poor bone density: A prospective clinical study10.1016/j.joms.2011.08.007 ↗
21. Effect of a modified stepped osteotomy on the primary stability of dental implants in low-density bone: A cadaver study10.11607/jomi.3720 ↗
22. A new concept in maxillary implant surgery: The osteotome technique
23. A novel osseous densification approach in implant osteotomy preparation to increase biomechanical primary stability, bone mineral density, and bone-to-implant contact10.11607/jomi.4817 ↗
24. The effect of osseodensification and different thread designs on the dental implant primary stability10.12688/f1000research.17292.1 ↗
25. Effects of osseodensification protocol on insertion, removal torques, and resonance frequency analysis of BioHorizons® conical implants. An ex vivo study10.1016/j.jobcr.2020.08.019 ↗
26. In vivo assessment of trabecular bone microarchitecture by high-resolution peripheral quantitative computed tomography10.1210/jc.2005-1258 ↗
27. Trabecular bone structure of the distal radius, the calcaneus, and the spine: Which site predicts fracture status of the spine best?10.1097/01.rli.0000129154.50654.4e ↗
28. Mandible and maxilla bone mineral density and threshold analysis studies by pQCT in two edentulous women receiving pamidronate10.1080/08869634.2003.11746238 ↗
29. The influence of insertion torque on the survival of immediately placed and restored single-tooth implants
30. Correlation between placement torque and survival of single-tooth implants
31. Primary stability, insertion torque, and bone density of conical implants with internal hexagon: Is there a relationship?10.1097/SCS.0b013e31827c9e01 ↗
32. The effect of insertion torque on the clinical outcome of single implants: A randomized clinical trial10.1111/cid.12337 ↗
33. Validity and clinical significance of biomechanical testing of implant/bone interface10.1111/j.1600-0501.2006.01365.x ↗
34. Resonance frequency analysis: Measuring implant stability and osseointegration
35. Correlation between ISQ and insertion torque values using double acid-etched implants
36. Compacted cancellous bone has a spring-back effect10.1080/00016470310018018 ↗
37. Atemporal osseointegration: Early biomechanical stability through osseodensification10.1002/jor.23893 ↗
38. Osseodensification effect on implants primary and secondary stability: Multicenter controlled clinical trial10.1111/cid.13007 ↗
39. New osseodensification implant site preparation method to increase bone density in low-density bone: In vivo evaluation in sheep10.1097/ID.0000000000000358 ↗
40. Osseodensification––A systematic review and qualitative analysis of published literature10.1016/j.jobcr.2019.10.002 ↗