Ultrasonic VHCF Tests on Very Large Specimens with Risk-Volume Up to 5000 mm3
Source abstract
Abstract
The research on the size-effects in Very-High-Cycle Fatigue (VHCF) has recently drawn the attention of several scholars. The fatigue cracks in VHCF originate from the largest defect present within the loaded material volume (risk-volume) and the larger the risk-volume, the larger the probability of critical defects affecting the VHCF response (size-effect). Many models have been proposed in the literature to deal with size-effects in VHCF. However, the proposed models cannot be validated on full-scale components, since VHCF tests are typically carried out with ultrasonic fatigue testing machines. The authors have proposed a specimen geometry, the so-called Gaussian specimens, to enlarge as much as possible the risk-volume in ultrasonic VHCF tests. In this study, fully reversed tension–compression ultrasonic VHCF tests up to 109 cycles were carried out on AISI H13 steel Gaussian specimens with a risk-volume of 5000 mm3, two times larger than the largest tested in the literature. The stress distribution and the absence of bending loads were verified with strain gages, proving that VHCF tests on risk-volumes of 5000 mm3 can be reliably carried out. Ultrasonic VHCF tests were also carried out on small hourglass specimens, confirming that larger risk-volumes allow for a more reliable design against VHCF failures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical Failure Analysis and Simulation · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Aerospace Engineering, Politecnico di Torino, 10129 Turin, Italy
References (20)
Show source-provided references
1. An explanation of size effect in fatigue of metals10.1243/JMES_JOUR_1972_014_053_02 ↗
2. Nishida, S. (1992). Failure Analysis in Engineering Applications, Butterworth-Heinemann. [1st ed.].
3. Murakami, Y. (2002). Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions Elsevier, Elsevier. [1st ed.].
4. Notable size effects on very high cycle fatigue properties of high strength steel10.1016/j.msea.2011.03.082 ↗
5. Comparison between dog-bone and Gaussian specimens for size effect evaluation in gigacycle fatigue10.3221/IGF-ESIS.26.06 ↗
6. On specimen design for size effect evaluation in ultrasonic gigacycle fatigue testing10.1111/ffe.12149 ↗
7. Tridello, A. (2019). VHCF response of two AISI H13 steels: Effect of manufacturing process and size-effect. Metals, 9.10.3390/met9020133 ↗
8. Very High Cycle Fatigue of a Cast Aluminum Alloy: Size Effect and Crack Initiation10.1007/s11665-018-3617-y ↗
9. VHCF response of Gaussian specimens made of high-strength steels: Comparison between unrefined and refined AISI H1310.1111/ffe.12610 ↗
10. Bathias, C., and Paris, P.C. (2004). Gigacycle Fatigue in Mechanical Practice, CRC Dekker. [1st ed.].10.1201/9780203020609 ↗
11. Effects of inclusion size and location on very-high-cycle fatigue behavior for high strength steels10.1016/j.msea.2012.07.118 ↗
12. Very high cycle fatigue measuring techniques10.1016/j.ijfatigue.2012.11.016 ↗
13. VHCF response of as-built SLM AlSi10Mg specimens with large loaded volume10.1111/ffe.12830 ↗
14. Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
15. S-N curves in the very-high-cycle fatigue regime: Statistical modeling based on the hydrogen embrittlement consideration10.1111/ffe.12431 ↗
16. A unified statistical model for S-N fatigue curves: Probabilistic definition10.1111/j.1460-2695.2012.01711.x ↗
17. Fracture mechanics and scale effects in the fatigue of railway axles10.1016/j.engfracmech.2003.12.011 ↗
18. Characteristic S–N properties of high-carbon–chromium–bearing steel under axial loading in long-life fatigue10.1046/j.1460-2695.2002.00574.x ↗
19. Investigation of high cycle and Very-High-Cycle Fatigue behaviors for a structural steel with smooth and notched specimens10.1016/j.engfailanal.2010.06.002 ↗
20. Influence of different non-metallic inclusion types on the crack initiation in high-strength steels in the VHCF regime10.1016/j.ijfatigue.2014.03.003 ↗