Dynamic Frequency Support from a DFIG-Based Wind Turbine Generator via Virtual Inertia Control
Source abstract
Abstract
As the penetrated level of wind in power grids increases, the online system inertia becomes weak. Doubly-fed induction generator (DFIG)-based wind turbine generators (WTGs) are required to provide virtual inertia response to support system frequency. The present inertia control strategy with fixed control gain is not suitable and may cause stall of the DFIG-based WTG, as the virtual inertia response potential from the DFIG-based WTG is different with various wind speed conditions. This paper addresses a virtual inertia control method for the DFIG-based WTGs to improve the system frequency stability without causing stalling of the wind turbine for various wind speed conditions. The effectiveness of the proposed virtual inertia control method is investigated in a small system embedded with the DFIG-based WTG. Results demonstrate that the proposed virtual inertia strategy improves the frequency stability without causing the rotor speed security issue. Thus, the proposed control strategy can secure the dynamic system frequency security of power systems under the scenarios of full and partial loads, and, consequently, the proposed method provides a promising solution of ancillary services to power systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wind Turbine Control Systems · Microgrid Control and Optimization · Wind Energy Research and Development
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electrical Engineering, Nantong University, Nantong 226019, China
Department of Electrical Engineering, Northeast Electric Power University, Jilin 132012, China
Funding
Application research program of Nantong City · Key project of smart grid technology and equipment of national key research and development plan of China · National Natural Science Foundation of China
References (29)
Show source-provided references
1. Bevrani, H. (2014). Robust Power System Frequency Control, Springer. [2nd ed.].10.1007/978-3-319-07278-4 ↗
2. Ackermann, T. (2012). Wind Power in Power Systems, John Wiley & Sons, Ltd.. [2nd ed.].10.1002/9781119941842 ↗
3. A review of the state of the art of power electronics for wind turbines10.1109/TPEL.2009.2017082 ↗
4. Short-term frequency support of a doubly-fed induction generator based on an adaptive power reference function10.1016/j.ijepes.2020.105955 ↗
5. Dynamic capabilities of an energy storage-embedded DFIG system10.1109/TIA.2019.2924859 ↗
6. Load shedding on an isolated system10.1109/59.466502 ↗
7. Temporary frequency support of a DFIG for high wind power penetration10.1109/TPWRS.2018.2810841 ↗
8. EirGrid (2016). A Proposal for Rate of Change of Frequency Remuneration Mechanism Recommendations, EirGrid.
9. ENTSO-E (2013). Requirements for grid connection applicable to all generators. European Network of Transmission System Operators for Electricity, ENTSO-E.
10. Kinetic energy of wind-turbine generators for system frequency support10.1109/TPWRS.2008.2004827 ↗
11. Review of contribution to frequency control through variable speed wind turbine10.1016/j.renene.2010.11.009 ↗
12. Active participation of variable speed wind turbine in inertial and primary frequency regulations10.1016/j.epsr.2017.03.001 ↗
13. A variable droop frequency control strategy for wind farms that considers optimal rotor kinetic energy10.1109/ACCESS.2019.2914496 ↗
14. Inertial response of variable speed wind turbines10.1016/j.epsr.2005.12.002 ↗
15. Comparison of the response of doubly fed and fixed-speed induction generator wind turbines to changes in network frequency10.1109/TEC.2004.827712 ↗
16. Capability-coordinated frequency control scheme of a virtual power plant with renewable energy sources10.1049/iet-gtd.2018.5828 ↗
17. Virtual inertia for variable speed wind turbines10.1002/we.1549 ↗
18. Inertial control of a DFIG-based wind power plant using the maximum rate of change of frequency and the frequency deviation10.5370/JEET.2015.10.2.496 ↗
19. Towards an Assessment of Power System Frequency Support from Wind Plant—Modeling Aggregate Inertial Response10.1109/TPWRS.2012.2236365 ↗
20. Design and Implementation of a Variable Synthetic Inertia Controller for Wind Turbine Generators10.1109/TPWRS.2018.2865958 ↗
21. Machowski, J., Bialek, J.W., and Bumby, J.R. (2008). Frequency stability and control. Power System Dynamics: Stability and Control, John Wiley & Sons, Ltd.. [2nd ed.].
22. Ajjarapu, V., McCalley, J.D., Rover, D., Wang, Z., and Wu, Z. (2010). Novel Sensorless Generator Control and Grid Fault Ride-through Strategies for Variable-Speed Wind Turbines and Implementation on a New Real-Time Simulation Platform. [Ph.D. Dissertation, Department of Electrical Engineering, Iowa State University].
23. Nonlinear control of a variable speed wind turbine using a two mass model10.1109/TEC.2010.2090155 ↗
24. Hand, M.M. (1999). Variable-Speed Wind Turbine Controller Systematic Design Methodology: A Comparison of Non-Linear and Linear Model-Based Designs, National Renewable Energy Laboratory. NREL/TP-500-25540.10.2172/12172 ↗
25. Sensorless maximum power point tracking of wind by DFIG using rotor position phase lock loop (PLL)10.1109/TPEL.2008.2009938 ↗
26. Yoo, I., Kang, Y.C., Yang, D., Kim, K.-H., and Park, J.-W. (2020). Power Smoothing of a Variable-Speed Wind Turbine Generator Based on a Two-Valued Control Gain. IEEE Trans. Sustain. Energy (Early Access).10.1109/TSTE.2020.2975061 ↗
27. High wind power penetration in isolated power systems—Assessment of wind inertial and primary frequency responses10.1109/TPWRS.2013.2240466 ↗
28. Dynamic models for steam and hydro turbines in power system studies
29. Eto, J.H. (2010). Use of Frequency Response Metrics to Assess the Planning and Operating Requirements for Reliable Integration of Variable Renewable Generation, Ernest Orlando Lawrence Berkeley National Laboratory. Technology Report.10.2172/1003830 ↗