Eco-Efficient Cement-Based Materials Using Biomass Bottom Ash: A Review
Source abstract
Abstract
In recent years the use of biomass for electricity generation in thermal and cogeneration plants has increased worldwide because it is an environmentally clean fuel whose impact measured in greenhouse gas emissions is practically zero. However, biomass bottom ash, a waste produced during combustion, has also increased considerably, which has both a negative economic and environmental impact, due to landfill transport and management of this by-product. Although biomass bottom ash has potential characteristics for application in the manufacture of construction materials, its full-scale application is difficult because of the wide range in physicochemical properties, depending on the type of biomass burned, such as wood residue, olive waste, waste paper sludge, cocoa shell, etc., and the type of combustion process in the plant. This study reviews the influence on the physicochemical properties, mechanical behavior, and durability of different cement-based materials, such as mortars, concrete, and cement-treated granular material, manufactured from biomass bottom ash. The previous studies demonstrate the feasibility of substituting natural materials for biomass bottom ash in cement-based materials, presenting adequate mechanical behavior and durability properties to comply with the required technical specifications in different building materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Construction Engineering Area, University of Córdoba, 14014 Córdoba, Spain
Funding
Junta de Andalucía
References (66)
Show source-provided references
1. Potential contribution of biomass to the sustainable energy development10.1016/j.enconman.2009.03.013 ↗
2. Capros, P., Mantzos, L., Tasios, N., De Vita, A., and Kouvaritakis, N. (2010). EU Energy Trends to 2030: Update 2009, Publications Office of the European Union.
3. Catalytic pyrolysis of microalgae to high-quality liquid bio-fuels10.1016/j.biombioe.2011.04.043 ↗
4. Pyrolytic characteristics and kinetic studies of three kinds of red algae10.1016/j.biombioe.2011.01.011 ↗
5. Besel, S.A. (2007). Biomass: Gasification, Institute for the Diversification and Saving of S. S.. Energy (IDEA).
6. Mortar formulations with bottom ash from biomass combustion10.1016/j.conbuildmat.2013.03.093 ↗
7. Characterisation and technical feasibility of using biomass bottom ash for civil infrastructures10.1016/j.conbuildmat.2014.01.087 ↗
8. CEDEX, C.d.E.y.E.d.O.P. (2014, December 01). Cenizas Procedentes de la Incineración de Biomasa, Available online: http://www.cedexmateriales.es/catalogo-de-residuos/23/cenizas-procedentes-de-laincineracion-de-biomasa/.
9. Koppejan, J., and Van Loo, S. (2012). The Handbook of Biomass Combustion and Co-Firing, Routledge.10.4324/9781849773041 ↗
10. Use of olive biomass fly ash in the preparation of environmentally friendly mortars10.1021/es200968a ↗
11. Fly and bottom ashes from biomass combustion as cement replacing components in mortars production: Rheological behaviour of the pastes and materials compression strength10.1016/j.chemosphere.2011.06.070 ↗
12. Technical and environmental performance of lower carbon footprint cement mortars containing biomass fly ash as a secondary cementitious material10.1016/j.resconrec.2018.03.004 ↗
13. Cofired biomass fly ashes in mortar: Reduction of Alkali Silica Reaction (ASR) expansion, pore solution chemistry and the effects on compressive strength10.1016/j.conbuildmat.2015.02.021 ↗
14. Quality and durability properties and life-cycle assessment of high volume biomass fly ash mortar10.1016/j.conbuildmat.2018.11.173 ↗
15. Coal–biomass fly ashes for cement production of CEM II/A-V 42.5R10.1016/j.conbuildmat.2011.10.022 ↗
16. Durability of biomass fly ash concrete: Freezing and thawing and rapid chloride permeability tests10.1016/j.fuel.2007.05.027 ↗
17. Effects of olive residue biomass fly ash as filler in self-compacting concrete10.1016/j.conbuildmat.2012.09.101 ↗
18. Mechanical performance of bedding mortars made with olive biomass bottom ash10.1016/j.conbuildmat.2016.02.065 ↗
19. Mechanical and durability properties of concretes manufactured with biomass bottom ash and recycled coarse aggregates10.1016/j.conbuildmat.2014.09.019 ↗
20. Feasible use of biomass bottom ash in the manufacture of cement treated recycled materials10.1617/s11527-015-0715-2 ↗
21. Effects of treatments on biomass bottom ash applied to the manufacture of cement mortars10.1016/j.jclepro.2017.04.024 ↗
22. Potential use of biomass bottom ash as alternative construction material: Conflictive chemical parameters according to technical regulations10.1016/j.fuel.2014.03.017 ↗
23. Feasible use of biomass bottom ash as addition in the manufacture of lightweight recycled concrete10.1007/s12649-016-9522-4 ↗
24. Feasibility of using olive biomass bottom ash in the sub-bases of roads and rural paths10.1016/j.conbuildmat.2018.06.035 ↗
25. Feasibility of using biomass fly and bottom ashes to produce RCC and PCC10.1061/(ASCE)MT.1943-5533.0001796 ↗
26. Feasibility of using biomass fly and bottom ashes in dry-cast concrete production10.1016/j.conbuildmat.2016.12.009 ↗
27. Characterization and effect of using bottom and fly ashes from co-combustion of cocoa waste as mineral addition in concrete10.1007/s12649-017-0031-x ↗
28. Durability of new blended cements additioned with recycled biomass bottom ASH from electric power plants10.1016/j.conbuildmat.2019.07.176 ↗
29. Valorisation of woody biomass bottom ash in Portland cement: A characterization and hydration study10.1016/j.jece.2016.11.042 ↗
30. An evaluation of bottom ash from plant biomass as a replacement for cement in building blocks10.1016/j.fuel.2013.10.077 ↗
31. A study of the application of residue from burned biomass in mortars10.1590/S1516-14392004000400007 ↗
32. An overview of the composition and application of biomass ash. Part 1. Phase–mineral and chemical composition and classification10.1016/j.fuel.2012.09.041 ↗
33. Agrela, F., Cabrera, M., Morales, M.M., Zamorano, M., and Alshaaer, M. (2019). Biomass fly ash and biomass bottom ash. New Trends in Eco-efficient and Recycled Concrete, Elsevier.10.1016/B978-0-08-102480-5.00002-6 ↗
34. Characterization of wastepaper sludge ash for its valorization as a component of hydraulic binders10.1016/j.clay.2012.01.007 ↗
35. Physicochemical characterization and possible applications of the waste biomass ash from oleoresin industries of India10.1016/j.fuel.2013.02.067 ↗
36. Physico-chemical characterisation of Indian biomass ashes10.1016/j.fuel.2007.05.045 ↗
37. Biomass co-firing in a pressurized fluidized bed combustion (PFBC) combined cycle power plant: A techno-environmental assessment based on computational simulations10.1016/j.fuproc.2006.07.003 ↗
38. ASTM C270-19ae1 (2019). Standard Specification for Mortar for Unit Masonry, ASTM International.
39. ASTM C305-14 (2014). Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, ASTM International.
40. EN 1015-2:1999/A1:2007 (2007). Methods of Test for Mortar for Masonry—Part 2: Bulk Sampling of Mortars and Preparation of Test Mortars, European Committee for Standardization.
41. EN 196-1:2018 (2018). Methods of Testing Cement—Part 1: Determination of Strength, European Committee for Standardization.
42. EN 772-16:2011 (2011). Methods of Test for Masonry Units—Part 16: Determination of Dimensions, European Committee for Standardization.
43. EHE-08 (2008). Instrucción de Hormigón Estructural, Secretaría General Técnica, Ministerio de Fomento. (In Spanish).
44. EN 12350-2:2009 (2009). Testing Fresh Concrete—Part 2: Slump-Test, European Committee for Standardization.
45. EN 12390-3:2009 (2009). Testing Hardened Concrete—Part 3: Compressive Strength of Test Specimens, European Committee for Standardization.
46. EN 12390-5:2009 (2009). Testing Hardened Concrete—Part 5: Flexural Strength of Test Specimens, European Committee for Standardization.
47. EN 12390-7:2009 (2009). Testing Hardened Concrete—Part 7: Density of Hardened Concrete, European Committee for Standardization.
48. ASTM C39/C39M-14 (2014). Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International.
49. ASTM C78/C78M-10 (2010). Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International.
50. ASTM C642-13 (2013). Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International.
51. ABNT NBR NM 67:1998 (1998). Concrete—Slump Test for Determination of the Consistency, Associação Brasileira de Normas Técnicas (ABNT).
52. ABNT NBR 5739:2018 (2018). Concrete—Compression Test of Cylindrical Specimens, Associação Brasileira de Normas Técnicas (ABNT).
53. ABNT NBR 7222:2011 (2011). Concrete and Mortar—Determination of the Tension Strength by Diametrical Compression of Cylindrical Test Specimens, Associação Brasileira de Normas Técnicas (ABNT).
54. Faubert, J.P., Gagné, R., Yahia, A., and Fournier, B. (2013). Valorisation de Particules Fines dans les Bétons Compactés au Rouleau et les Bétons Moulés à Sec, Mémoire de maîtrise en génie civil, Université de Sherbrooke.
55. Investigation into the properties of concrete modified with biomass combustion fly ash10.1016/j.conbuildmat.2018.04.125 ↗
56. EN 12390-8:2009 (2009). Testing Hardened Concrete—Part 8: Depth of Penetration of Water under Pressure, European Committee for Standardization.
57. ASTM C157/C157M-17 (2017). Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, ASTM International.
58. Base, C.T.A. (1979). Report SR221. 01S, Portland Cement Association.
59. Cement treated recycled demolition waste as a road base material10.1007/s11595-010-0073-4 ↗
60. Application of cement-treated recycled materials in the construction of a section of road in Malaga, Spain10.1016/j.conbuildmat.2013.02.034 ↗
61. Effect of biomass fly ashes as road stabilisation binder10.1080/14680629.2016.1235508 ↗
62. Reuse of woody biomass fly ash in cement-based materials10.1016/j.conbuildmat.2014.11.052 ↗
63. EN 103 501-94 (1994). Geotechnics. Compactation Test. Modified Proctor, European Committee for Standardization.
64. NLT-305-90 (1990). Resistencia a Compresión Simple de Materiales Tratados con Conglomerantes Hidráulicos, CEDEX. (In Spanish).
65. EN 12390-1:2013 (2014). Testing Hardened Concrete—Part 1: Shape, Dimensions and Other Requirements for Specimens and Moulds, European Committee for Standardization.
66. UNE 103 502-95 (1995). Método de Ensayo Para Determinar en Laboratorio el Índice C.B.R. de un Suelo, Spanish Committee for Standardization. (In Spanish).