Structural Behavior of Large-Scale I-Beams with Combined Textile and CFRP Reinforcement
Source abstract
Abstract
With the innovative composite material carbon-reinforced concrete, thin-walled, high-performance components can be realized. A combination of carbon fiber reinforced polymer (CFRP) bars and non-metallic textile grids is advantageous as it exploits the full potential of the high-performance materials to reduce dead loads, increases durability, and extends lifespan. For new components with such mixed reinforcement, applicable design concepts and engineering rules are necessary to accurately determine the structural and deformation behavior. To validate models and detailing rules previously developed, three large carbon reinforced concrete I-beams were designed and tested to failure with a realistic line load. CFRP bars served as principal bending reinforcement, whereas shear and flange reinforcement consisted of textile grids. Results showed that existing models for bending using variation of strain distribution as well as non-linear finite-element analysis predicted the flexural behavior of structural components with mixed reinforcement in ultimate limit state (ULS) appropriately. Yet, calculation of shear capacity requires further studies to determine textile reinforcement contribution and estimate reduction for concrete strength in reinforced compression struts. For serviceability limit state (SLS), three methods for determination of deflection delivered good results. In future, a rethinking is required with regard to the ductility and robustness of CFRP-reinforced concrete components. In this respect, pronounced cracking as well as the large ultimate strain and deflection compensate for the lacking yield capacity of the reinforcement.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Masonry and Concrete Structural Analysis · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Structural Concrete, RWTH Aachen University, 52074 Aachen, Germany
Hentschke Bau GmbH, 02625 Bautzen, Germany
Funding
Bundesministerium für Bildung und Forschung
References (81)
Show source-provided references
1. Hordijk, D.A., and Luković, M. (2017). Towards Standardization: Testing and Design of Carbon Concrete Composites. High Tech Concrete: Where Technology and Engineering Meet, Proceedings of the 2017 FIB Symposium, Maastricht, The Netherlands, 12–14 June 2017, Springer International Publishing.10.1007/978-3-319-59471-2 ↗
2. Innovative design concepts: Application of textile reinforced concrete to shell structures10.1002/suco.201700157 ↗
3. Building lightweight structures with carbon-fiber-reinforced polymer-reinforced ultra-high-performance concrete: Research approach, construction materials, and conceptual design of three building components10.1002/suco.201700225 ↗
4. Lightweight ceiling system made of carbon reinforced concrete10.1002/suco.201700224 ↗
5. Leichte Dachschalen aus Carbonbeton10.1002/best.201600030 ↗
6. Flexural behaviour of filigree slab elements made of carbon reinforced UHPC10.1016/j.conbuildmat.2018.12.027 ↗
7. Carbonbeton—Hochleistungsbaustoff mit Effizienzpotenzial
8. Spelter, A., Bergmann, S., Bielak, J., and Hegger, J. (2019). Long-Term Durability of Carbon-Reinforced Concrete: An Overview and Experimental Investigations. Appl. Sci., 9.10.3390/app9081651 ↗
9. Herbrand, M., Adam, V., Classen, M., Kueres, D., and Hegger, J. (2017). Strengthening of Existing Bridge Structures for Shear and Bending with Carbon Textile-Reinforced Mortar. Materials, 10.10.20944/preprints201708.0105.v1 ↗
10. Scheerer, S., Zobel, R., Müller, E., Senckpiel-Peters, T., Schmidt, A., and Curbach, M. (2019). Flexural Strengthening of RC Structures with TRC—Experimental Observations, Design Approach and Application. Appl. Sci., 9.10.3390/app9071322 ↗
11. Life-Cycle Cost Analysis of Carbon Fiber-Reinforced Polymer Reinforced Concrete Bridges
12. Life-Cycle Cost and Life-Cycle Assessment Analysis at the Design Stage of a Fiber-Reinforced Polymer-Reinforced Concrete Bridge in Florida10.1520/ACEM20180113 ↗
13. Hordijk, D.A., and Luković, M. (2017). Extremely Light and Slender Precast Pedestrian-Bridge Made Out of Textile-Reinforced Concrete (TRC). High Tech Concrete: Where Technology and Engineering Meet, Proceedings of the 2017 FIB Symposium, Maastricht, The Netherlands, 12–14 June 2017, Springer International Publishing.10.1007/978-3-319-59471-2 ↗
14. Querkrafttragfähigkeit von Carbonbeton-Plattenbrücken mit C-förmiger Querkraftbewehrung10.1002/best.201900001 ↗
15. Parking slabs made of carbon reinforced concrete10.1002/suco.201700147 ↗
16. Carbonbeton und Stahlbeton im wirtschaftlichen Vergleich10.37544/0005-6650-2019-06-80 ↗
17. International Federation for Structural Concrete (2013). FIB Model Code for Concrete Structures 2010, Ernst & Sohn.
18. Canadian Standards Association (2012). Design and Construction of Building Structures with Fibre-Reinforced Polymers, Canadian Standards Association. CSA S806-12:2012-03.
19. American Concrete Institute (2015). Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer (FRP) Bars, American Concrete Institute. ACI 440.1R-15.
20. C3-Projekt—Erfolgreiche Partnerschaft für Innovation im Bauwesen10.37544/0005-6650-2018-07-08-31 ↗
21. Realization of TRC façades with impregnated AR-glass textiles10.4028/www.scientific.net/KEM.466.121 ↗
22. Hinterlüftete Vorhangfassaden aus Textilbeton10.1002/bate.201101462 ↗
23. Tragverhalten und Dauerhaftigkeit einer schlanken Textilbetonbrücke10.1002/best.201000082 ↗
24. Flexural design of a modular footbridge system with pretensioned carbon fiber reinforced polymer reinforcement10.1002/suco.201900047 ↗
25. solidian GmbH (2020, June 05). Available online: https://www.solidian.com/fileadmin/user_upload/pdf/solidian_Z-71.3-40_abZ_Garagen.pdf.
26. Kueres, S. (2019). Analysis and Design of Concrete Beams with Pre-Tensioned CFRP Reinforcement. [Ph.D. Thesis, RWTH Aachen University].
27. Schumann, A., May, S., and Curbach, M. (2018). Design and Testing of Various Ceiling Elements Made of Carbon Reinforced Concrete. Proceedings, 2.10.3390/ICEM18-05436 ↗
28. Chudoba, R., Sharei, E., Senckpiel-Peters, T., and Schladitz, F. (2019). Numerical modeling of non-uniformly reinforced carbon concrete lightweight ceiling elements. Appl. Sci., 9.10.3390/app9112348 ↗
29. Kulas, C. (2013). Zum Tragverhalten getränkter textiler Bewehrungselemente für Betonbauteile. [Ph.D. Thesis, RWTH Aachen University].
30. Foster, S., Gilbert, I.R., Mendis, P., Al-Mahaidi, R., and Millar, D. (2018). Experimental study of the shear behaviour of thin walled CFRP reinforced UHPC structures. Better, Smarter, Stronger, Proceedings of the 2018 FIB Congress, Melbourne, Australia, 7–11 October 2018, Federation internationale du beton.
31. Bielak, J., Hegger, J., and Schmidt, M. (2019, January 4–7). Shear Capacity of Carbon Fibre Textile Reinforced Concrete Slabs with Planar and C-Shaped Shear Reinforcement. Proceedings of the Fiber Reinforced Polymer Reinforced Concrete Structures 14, Belfast, UK.10.3390/app9071382 ↗
32. Comparison of Existing Approaches for Computing Deflection of Reinforced Concrete10.14359/51718072 ↗
33. Stochastic modeling of multi-filament yarns: I. Random properties within the cross-section and size effect10.1016/j.ijsolstr.2005.06.063 ↗
34. Rempel, S. (2018). Zur Zuverlässigkeit der Bemessung von biegebeanspruchten Betonbauteilen mit textiler Bewehrung. [Ph. D. Thesis, RWTH Aachen University].
35. Prüfmethode zur Ermittlung des Zugtragverhaltens von textiler Bewehrung für Beton10.37544/0005-6650-2017-06-85 ↗
36. Stochastic modeling of multi-filament yarns: II. Random properties over the length and size effect10.1016/j.ijsolstr.2005.06.063 ↗
37. Probabilistic crack bridge model reflecting random bond properties and elastic matrix deformation10.1016/j.compositesb.2017.11.040 ↗
38. Ermittlung der Materialkennwerte der Bewehrung für die Bemessung von textilbewehrten Bauteilen10.37544/0005-6650-2017-06-76 ↗
39. Verankerungsverhalten textiler Bewehrungen in dünnen Betonbauteilen10.1002/best.201800013 ↗
40. Bielak, J., Heiermann, T., Will, N., Hegger, J., and Raupach, M. (2019). Zwanzig20—Carbon Concrete Composit—C3-V1.2 Nachweis- und Prüfkonzepte für Normen und Zulassungen—Schlussbericht Teilvorhaben V1.2-III 424/2019, RWTH Aachen University.
41. An incremental inverse analysis procedure for identification of bond-slip laws in composites applied to textile reinforced concrete10.1016/j.compositesb.2017.11.014 ↗
42. Derkowski, W., Gwozdziewicz, P., Hojdys, L., Krajewski, P., and Pantak, M. (2019). Splitting Failure Mode in Textile Reinforced Concrete. Concrete—Innovations in Materials, Design and Structures, Proceedings of the 2019 FIB Symposium, Krakow, Poland, 27–29 May 2019, International Federation for Structural Concrete (FIB).
43. Einflussparameter auf die Spaltrissbildung in Textilbeton10.1002/best.201800071 ↗
44. Lorenz, E. (2014). Endverankerung und Übergreifung Textiler Bewehrungen in Betonmatrices. [Ph.D. Thesis, TU Dresden]. Available online: https://nbn-resolving.org/urn:nbn:de:bsz:14-qucosa-170583.
45. American Society for Testing and Materials (2016). Standard Test. Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars, ASTM International. ASTM D7205/D7205M-06.
46. Zugelemente aus CFK und ihre Verankerungen10.1002/bate.201200057 ↗
47. Horvatits, J. (2008). Segmentierte Vergussverankerung für Spannglieder mit Kohlenstofffaserverbundwerkstoff. [Ph.D. Thesis., Technische Universität Wien].
48. Böhm, R., Thieme, M., Wohlfahrt, D., Wolz, D., Richter, B., and Jäger, H. (2018). Reinforcement Systems for Carbon Concrete Composites Based on Low-Cost Carbon Fibers. Fibers, 6.10.20944/preprints201807.0249.v1 ↗
49. thyssenkrupp Carbon Components GmbH (2017). Carbon4ReBAR. Data Sheet, thyssenkrupp Carbon Components.
50. Canadian Standards Association (2007). Design and Construction of Building Components with Fibre-Reinforced Polymers (Reaffirmed 2007), Canadian Standards Association. CSA S806-02.
51. MFPA Leipzig GmbH (2020, June 05). Available online: https://doi.org/10.2314/KXP:1679084798.
52. RILEM (1994). Bond test for reinforcement steel. 2. Pull-out test, 1983. RILEM Recommendations for the Testing and Use of Constructions Materials, E & FN SPON.
53. Carbon Concrete Composites C3—Nachhaltige Bindemittel und Betone für die Zukunft10.1002/best.201700058 ↗
54. Deutsches Institut für Normung e.V. (2017). Beton—Festlegung, Eigenschaften, Herstellung und Konformität; Deutsche Fassung EN 206:2013+A1:2016, Beuth. 91.100.30 (DIN EN 206:2017-01.
55. Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets10.1007/s11527-005-9034-3 ↗
56. State-of-the-art on strengthening of masonry structures with textile reinforced mortar (TRM)10.1016/j.conbuildmat.2018.08.039 ↗
57. Deutsches Institut für Normung e.V. (2016). Prüfverfahren für Zement-Teil 1: Bestimmung der Festigkeit. Deutsche Fassung EN 196-1:2016, Beuth. 91.100.10 (DIN EN 196-1:2016-11).
58. Deutsches Institut für Normung e.V. (2009). Prüfung von Festbeton—Teil 3: Druckfestigkeit von Probekörpern. Deutsche Fassung EN 12390-3:2009, Beuth. 91.100.30 (DIN 12390-3:2009-07).
59. Deutsches Institut für Normung e.V. (2014). Prüfung von Festbeton—Teil 13: Bestimmung des Elastizitätsmoduls unter Druckbelastung (Sekantenmodul). Deutsche Fassung EN 12390-13:2013, Beuth. 91.100.30 (DIN EN 12390-13:2014-06).
60. Schmidt, M., Bielak, J., and Hegger, J. (2019, January 4–7). Large-Scale Tests on the Structural and Deformation Behaviour of I-Beams with Carbon Reinforcement. Proceedings of the Fiber Reinforced Polymer Reinforced Concrete Structures 14, Belfast, UK.
61. (2018). InfoCAD, InfoGraph GmbH. Version 18.00 x64.
62. Einaxialer Zugversuch für Carbonbeton mit textiler Bewehrung10.1002/best.201700074 ↗
63. Deutsches Institut für Normung e.V. (2013). Nationaler Anhang—National Festgelegte Parameter—Eurocode 2: Bemessung und Konstruktion von Stahlbeton- und Spannbetontragwerken—Teil 1-1: Allgemeine Bemessungsregeln und Regeln für den Hochbau, Beuth. 91.010.30; 91.080.40 (DIN EN 1992-1-1/NA:2013-04).
64. European Committee for Standardisation (2010). Eurocode 2: Design of Concrete Structures—Part 1-1: General Rules and Rules for Buildings. Incl. Corrigendum 1: EN 1992-1-1:2004/AC:2008, Incl. Corrigendum 2: EN 1992-1-1:2004/AC:2010;, European Committee for Standardisation. EN 1992-1-1:2004.
65. Kurth, M.C. (2012). Zum Querkrafttragverhalten von Betonbauteilen mit Faserverbundkunststoff-Bewehrung. [Ph.D. Thesis, RWTH Aachen University].
66. (2019). ABAQUS/CAE, Dassault Systèmes SE. Version 2019 Build ID 2018_09_24-20.41.51.
67. A strain-hardening microplane damage model for thin-walled textile-reinforced concrete shells, calibration procedure, and experimental validation10.1016/j.compstruct.2016.06.030 ↗
68. Sargin, M. (1971). Stress–Strain Relationships for Concrete and the Analysis of Structural Concrete Sections. [Ph.D. Thesis, University of Waterloo].
69. Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements10.1016/0008-8846(76)90007-7 ↗
70. Stoner, J.G. (2015). Finite Element Modelling of GFRP Reinforced Concrete Beams. [Master’s Thesis, University of Waterloo].
71. Numerische Abbildung von Beton mit einem plastischen Schädigungsmodell—Grundlegende Untersuchungen zu Normalbeton und UHPC10.37544/0005-6650-2015-06-44 ↗
72. A Plastic-Damage Model for Concrete10.1016/0020-7683(89)90050-4 ↗
73. Carbonbeton unter einaxialer Druckbeanspruchung: Ergebnisse systematischer experimenteller Untersuchungen10.1002/best.201700006 ↗
74. Bochmann, J. (2019). Carbonbeton unter einaxialer Druckbeanspruchung. [Ph.D. Thesis, TU Dresden].
75. Carbonbeton unter Druck: Teil 2: Einfluss von Bewehrungsgeometrie und -anordnung10.1002/best.201700053 ↗
76. Branson, D.E. (1965). Instantaneous and Time-Dependent Deflections of Simple and Continuous Reinforced Concrete Beams, Alabama State Highway Department. HPR Rep. No. 7, Part 1.
77. Effective moment of intertia for calculating deflections of concrete members containing steel reinforcement and FRP reinforcement
78. Equivalent Moment of Inertia Based on Integration of Curvature10.1061/(ASCE)CC.1943-5614.0000164 ↗
79. Design Approach for Calculating Deflection of FRP-Reinforced Concrete10.1061/(ASCE)CC.1943-5614.0000195 ↗
80. Ye, L., Feng, P., and Yue, Q. (2010). Comparative Study of Deflection Equations for FRP RC Beams. Advances in FRP Composites in Civil Engineering, Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Beijing, China, 27–29 September 2010, Springer.10.1007/978-3-642-17487-2 ↗
81. Reliability analysis of footbridges pre-tensioned with carbon fiber reinforced polymer tendons under flexural loading10.1016/j.engstruct.2019.109546 ↗