Vision System in Product Quality Control Systems
Source abstract
Abstract
The development of technology for manufacturing products and machines carrying out technological operations is closely linked to developing systems for tracking and controlling product and production process parameters. This paper shows how the development of quality control and production management systems such as TQM and MES is related to the development of imaging and image analysis methods used in industry. The development of imaging methods is discussed in the context of developing product quality control capabilities. It is also shown as to what extent image analysis can be used to observe manufacturing parameters and process management capabilities. It was noted that the use of vision systems as an industrial measurement-quality control system would still increase. Due to the increase in imaging resolution, there was an increase in the imaging frequency, growth in the spectral range of imaging, and the dynamic development of three-dimensional and hybrid imaging methods. Based on experience from industrial applications and tasks described in scientific publications, areas where vision systems will play a key role in inspection tasks have been identified. This is the introductory article for the Special Issue “Image Analysis for Product Quality Control” on using vision systems in various industries to execute production quality control tasks.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Industrial Vision Systems and Defect Detection · Thermography and Photoacoustic Techniques · Advanced Measurement and Detection Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Process Control, Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow, Poland
Funding
the Vision System Laboratory, Department of Process Automation, Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology
References (56)
Show source-provided references
1. Maintaining preventive maintenance and maintenance prevention: Analysing the dynamic implications of Total Productive Maintenance10.1002/sdr.335 ↗
2. Total Productive Maintenance (TPM) Implementation in a Machine Shop: A Case Study10.1016/j.proeng.2013.01.084 ↗
3. Total quality management for enhancing organizational performance: The mediating role of green manufacturing practices10.1016/j.jclepro.2021.127366 ↗
4. Improvement indicators for Total Productive Maintenance policy10.1016/j.conengprac.2018.09.019 ↗
5. Impact of TQM on organisational performance: The case of Indian manufacturing and service industry
6. Employing total quality practices in sustainable supply chain management10.1016/j.spc.2021.07.013 ↗
7. Critical decisions for ERP integration: Small business issues10.1016/j.ijinfomgt.2009.03.001 ↗
8. Enterprise resource planning: Identifying relationships among critical success factors10.1108/BPMJ-12-2014-0128 ↗
9. Evaluating critical success factors of ERP implementation in SMEs
10. Impact of total quality management on corporate sustainability through the mediating effect of knowledge management10.1016/j.jclepro.2019.118806 ↗
11. Architektury zintegrowanych systemów informacyjnych przedsiębiorstw
12. „Inteligentna fabryka”—Nowe trendy w rozwoju systemów informatycznych dla przemysłu, Zarządzanie i Finanse, Journal of Management and Finance
13. Integration of Industry 4.0 technologies into Total Productive Maintenance practices10.1016/j.ijpe.2021.108224 ↗
14. Wielofunkcyjna ocena jakości urządzeń technologicznych i wyrobów
15. Nadzorowanie urządzeń technologicznych i jakości wyrobów w procesie produkcyjnym
16. Cyber-Physical Systems Security—A Survey10.1109/JIOT.2017.2703172 ↗
17. Rajkumar, R., Lee, I., Sha, L., and Stankovic, J. (2010, January 13–18). Cyber-physical systems: The next computing revolution. Proceedings of the 47th Annual Design Automation Conference 2010, Anaheim, CA, USA.10.1145/1837274.1837461 ↗
18. Cyber physical systems security: Analysis, challenges and solutions10.1016/j.cose.2017.04.005 ↗
19. Axelrod, C.W. (2013, January 3). Managing the risks of cyber-physical systems. Proceedings of the 2013 IEEE Long Island Systems, Applications and Technology Conference (LISAT), Farmingdale, NY, USA.10.1109/LISAT.2013.6578215 ↗
20. The strategies and methods of measurement in multifunctional quality inspection
21. Broy, M. (2010). Cyber-Physical Systems, Springer Berlin Heidelberg.10.1007/978-3-642-14901-6 ↗
22. Henning, K., Wolfgang, W., and Johannes, H. (2013). Umsetzungsempfehlungen für das ZukunftsprojektIndustrie 4.0, Bundesministerium für Bildung und Forschung. [3rd ed.].
23. Sioma, A. (2020). Automated Control of Surface Defects on Ceramic Tiles Using 3D Image Analysis. Materials, 13.10.3390/ma13051250 ↗
24. Struzikiewicz, G., and Sioma, A. (2020). Evaluation of Surface Roughness and Defect Formation after The Machining of Sintered Aluminum Alloy AlSi10Mg. Materials, 13.10.3390/ma13071662 ↗
25. The quiet revolution in machine vision—A state-of-the-art survey paper, including historical review, perspectives, and future directions10.1016/j.compind.2021.103472 ↗
26. Romaniuk, R.S., and Linczuk, M. Quality control automation of electric cables using machine vision. Proceedings of the Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2018.
27. Romaniuk, R.S., and Linczuk, M. Machine vision system for quality control of molded plastic packaging. Proceedings of the Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2019.
28. Romaniuk, R.S., and Linczuk, M. Tree-ring growth measurements automation using machine vision. Proceedings of the Photonics Applications in Astronomy, Communications, Industry, and High Energy Physics Experiments 2020.
29. Advanced Mechatronic System for In-Line Automated Optical Inspection of Metal Parts
30. Designing opto-mechatronic systems for fatigue process monitoring
31. Reiner, J. (2013). Identyfikacja i Modelowanie Optyczne Systemów Wizyjnej Kontroli Jakości Wytwarzania, Politechnika Wrocławska.
32. Systemy wizyjne w zapewnieniu jakości wytwarzania
33. Giesko, T. (2013). Metodyka Projektowania i Implementacji Innowacyjnych Systemów Optomechatronicznych, Wydawnictwo Naukowe Instytutu Technologii Eksploatacji-PIB.
34. Geometry and resolution in triangulation vision systems
35. The application of a fast algorithm for the classification of olives by machine vision10.1016/S0963-9969(00)00041-7 ↗
36. Infrared machine vision system for the automatic detection of olive fruit quality10.1016/j.talanta.2013.07.081 ↗
37. Identification of olive fruit, in intensive olive orchards, by means of its morphological structure using convolutional neural networks10.1016/j.compag.2020.105616 ↗
38. Locating and identifying sound knots and dead knots on sugi by the rule-based color vision system10.1007/s10086-003-0549-3 ↗
39. Differences in round wood measurements using electronic 2D and 3D systems and standard manual method
40. Assessment of wood surface defects based on 3D image analysis
41. Sioma, A., Socha, J., and Klamerus-Iwan, A. (2018). A New Method for Characterizing Bark Microrelief Using 3D Vision Systems. Forests, 9.10.3390/f9010030 ↗
42. Classification of thermally treated wood using machine learning techniques10.1007/s00226-018-1073-3 ↗
43. Measurement and estimation of the weld bead geometry in arc welding processes: The last 50 years of development10.1007/s40430-018-1359-2 ↗
44. Weld Seam Detection, Finding, and Setting of Process Parameters for Varying Weld Gap by the Utilization of Laser and Vision Sensor in Robotic Arc Welding10.1109/TIE.2021.3050368 ↗
45. 3D imaging methods in quality inspection systems
46. A stereovision measurement for large deformation of light structures10.1016/j.measurement.2018.12.062 ↗
47. Three-dimensional shape measurement using a structured light system with dual projectors10.1364/AO.57.003983 ↗
48. A High Accuracy Imaging and Measurement System for Wheel Diameter Inspection of Railroad Vehicles10.1109/TIE.2018.2803780 ↗
49. Laszlo, R., Holonec, R., Copîndean, R., and Dragan, F. (2019, January 21–23). Sorting System for e-Waste Recycling using Contour Vision Sensors. Proceedings of the 2019 8th International Conference on Modern Power Systems (MPS), Cluj, Romania.10.1109/MPS.2019.8759739 ↗
50. Tehrani, A., and Karbasi, H. (2022, January 12–14). A novel integration of hyper-spectral imaging and neural networks to process waste electrical and electronic plastics. Proceedings of the 2017 IEEE Conference on Technologies for Sustainability (SusTech), Phoenix, AZ, USA.10.1109/SusTech.2017.8333533 ↗
51. Real-time hyperspectral processing for automatic nonferrous material sorting
52. EMIS (2021). Global Machine Vision Market|Industrial Machine Vision Market, EMIS. Frost & Sullivan.
53. EMIS (2021). Global Forecast for Machine Vision Market (2022–2027 Outlook)—High Tech & Emerging Markets Report, EMIS. Barnes Reports.
54. IFR (2021). The World Robotics 2021 Industrial Robots Report, IFR. Available online: https://ifr.org/ifr-press-releases/news/robot-sales-rise-again.
55. EMIS (2021). Raport Machine Vision Market—Analisis and Forecasts from 2021 to 2028, EMIS. Grand View Research.
56. Scimeca, D. (2021, March 25). Vision System Design. Available online: https://www.vision-systems.com/.