Review of Magnetic Properties and Texture Evolution in Non-Oriented Electrical Steels
Source abstract
Abstract
Electrical steels can be classified into two groups: grain-oriented (GO) and non-oriented (NGO) electrical steel. NGO electrical steels are mainly considered as core materials for different devices, such as electric motors, generators, and rotating machines. The magnetic properties and texture evolution of NGO electrical steels depend on multiple factors (such as chemical content, heat-treatment, and rolling process) making the development of new products a complex task. In this review, studies on the magnetic properties of NGO electrical steels and the corresponding texture evolution are summarized. The results indicate that further research is required for NGO electrical steels to ensure high permeability and low core loss properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties and Applications · Magnetic properties of thin films · Magnetic Properties of Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409, USA
Funding
Nucor Corp. · Castrip
References (96)
Show source-provided references
1. Review of Fe-6.5 wt.% Si high silicon steel—A promising soft magnetic material for sub-kHz application10.1016/j.jmmm.2019.02.089 ↗
2. Recent development of non-oriented electrical steel in JFE steel
3. Cullity, B.D., and Graham, C.D. (2011). Introduction to Magnetic Materials, John Wiley & Sons.
4. Physical origin of losses in conducting ferromagnetic materials10.1063/1.330306 ↗
5. Effect of Al content on magnetic properties of Fe-Al Non-oriented electrical steel10.1016/j.jmmm.2017.03.082 ↗
6. Core loss prediction combining physical models with numerical field analysis10.1016/0304-8853(94)90646-7 ↗
7. Prediction of core losses of three phase transformers from estimation of the components contributing to the building factor10.1016/S0304-8853(02)00911-3 ↗
8. Analysis of effective resistance and eddy-current losses in multiturn winding of high-frequency magnetic components10.1109/TMAG.2002.806337 ↗
9. Correlation Between Microstructure, Texture, and Magnetic Induction in Nonoriented Electrical Steels10.1109/TMAG.2009.2032425 ↗
10. Effect of silicon on the loss separation and permeability of laminated steels10.1016/S0304-8853(96)00268-5 ↗
11. Improving magnetic properties of non-oriented electrical steels by controlling grain size prior to cold rolling10.1016/j.jmmm.2019.165636 ↗
12. Grain size dependence of coercivity and permeability in nanocrystalline ferromagnets10.1109/20.104389 ↗
13. Boehm, L., Hartmann, C., Gilch, I., Stoecker, A., Kawalla, R., Wei, X., Hirt, G., Heller, M., Korte-Kerzel, S., and Leuning, N. (2021). Grain Size Influence on the Magnetic Property Deterioration of Blanked Non-Oriented Electrical Steels. Materials, 14.10.3390/ma14227055 ↗
14. Investigation of total losses of non-oriented electrical steels10.12693/APhysPolA.118.1018 ↗
15. The optimum grain size for minimizing energy losses in iron10.1016/j.jmmm.2005.06.014 ↗
16. On the law of hysteresis10.1109/T-AIEE.1892.5570437 ↗
17. Non-oriented electrical steel sheets
18. Iron and silicon-iron alloys10.1109/TMAG.1971.1066998 ↗
19. The influence of silicon content on physical properties of non-oriented silicon steel10.1080/02670836.2017.1295519 ↗
20. Ordering–disordering phenomena and micro-hardness characteristics of B2 phase in Fe–(5–6.5%)Si alloys10.1016/j.msea.2005.07.012 ↗
21. The B2 and DO3 Ordering Reactions in Iron–Silicon Alloys in the Vicinity of the Curie Temperature10.1179/030634575790445279 ↗
22. Shimanaka, H., Ito, Y., Irie, T., Matsumura, K., Nakamura, H., and Shono, Y. (1980, January 5–9). Energy efficient electrical steels. Proceedings of the TMS-AIME Ferrous Metallurgy Committee at the Fall Meeting of the Metallurgical Society of AIME, Pittsburgh, PE, USA.
23. Effect of cerium content on the magnetic properties of non-oriented electrical steels10.2355/isijinternational.48.531 ↗
24. Study of the brittle behaviour of annealed Fe-6.5 wt.%Si ribbons produced by planar flow casting10.1016/0921-5093(96)10188-X ↗
25. Effect of nickel and manganese addition on ductility and magnetic properties of 6.5% silicon-iron alloy10.1109/TMAG.1978.1059756 ↗
26. Magnetic properties and workability of 6.5% Si steel sheet10.1016/0304-8853(96)00128-X ↗
27. Concurrent ordering and phase separation in the vicinity of the metastable critical point of order–disorder transition in Fe–Si alloys10.1016/S0921-5093(00)01874-8 ↗
28. Order in Fe–Si alloys: A neutron diffraction study10.1016/j.physb.2006.05.364 ↗
29. Dieter, G. (1986). Mechanical Metallurgy, McGraw-Hill.
30. Effects of precipitated phase and order degree on bending properties of an Fe-6.5 wt.% Si alloy with columnar grains10.1557/jmr.2011.136 ↗
31. Effect of ordering on magnetic properties of 6.5-percent silicon-iron alloy10.1109/TMAG.1979.1060174 ↗
32. Thermodynamic and kinetic analysis of the melt spinning process of Fe-6.5 wt.% Si alloy10.1016/j.jallcom.2018.08.293 ↗
33. Effect of quench cooling rate on residual stress, microstructure and mechanical property of an Fe–6.5 Si alloy10.1016/j.msea.2011.10.013 ↗
34. Strain-softening behavior of an Fe–6.5 wt.% Si alloy during warm deformation and its applications10.1016/j.msea.2010.10.093 ↗
35. Texture control during the manufacturing of nonoriented electrical steels10.1155/2008/173083 ↗
36. Effect of hot and cold rolling on grain size and texture in Fe-Si strips with Si-content larger than 2 wt.%10.4028/www.scientific.net/MSF.638-642.3561 ↗
37. Effect of hot and cold rolling on grain size and texture in Fe-2.4 wt.% Si strips10.1109/TMAG.2008.2001318 ↗
38. Effect of hot-rolling temperature on microstructure and texture of an ultra-low carbon Ti-interstitial-free steel10.1016/j.matlet.2007.04.081 ↗
39. Effect of rolling process on magnetic properties of Fe-3.3 wt.% Si non-oriented electrical steel
40. Petryshynets, I., Kováč, F., Petrov, B., Falat, L., and Puchý, V. (2019). Improving the Magnetic Properties of Non-Oriented Electrical Steels by Secondary Recrystallization Using Dynamic Heating Conditions. Materials, 12.10.3390/ma12121914 ↗
41. On the correlation of crystallographic macro-texture and magnetic magnetization anisotropy in non-oriented electrical steel10.1016/j.jmmm.2019.165485 ↗
42. Füzer, J., Dobák, S., Petryshynets, I., Kollár, P., Kováč, F., and Slota, J. (2021). Correlation between Cutting Clearance, Deformation Texture, and Magnetic Loss Prediction in Non-Oriented Electrical Steels. Materials, 14.10.3390/ma14226893 ↗
43. A new model of Goss texture development during secondary recrystallization of electrical steel10.1016/S1359-6454(97)00111-0 ↗
44. Transformation textures in steels10.1179/095066090790324046 ↗
45. Humphreys, F.J., and Hatherly, M. (2012). Recrystallization and Related Annealing Phenomena, Elsevier.
46. Through process texture evolution and magnetic properties of high Si non-oriented electrical steels10.1016/j.matchar.2012.06.006 ↗
47. Evolution of recrystallization texture in nonoriented electrical steels10.1016/S1359-6454(03)00115-0 ↗
48. Texture evolution in twin-roll strip cast non-oriented electrical steel with strong Cube and Goss texture10.1016/j.actamat.2020.08.048 ↗
49. Thermomechanical Processing for Recovery of Desired <001> Fiber Texture in Electric Motor Steels10.1007/s11661-008-9525-2 ↗
50. Influence of initial annealing on structure evolution and magnetic properties of 3.4% Si non-oriented steel during final annealing10.1016/j.jmmm.2015.05.058 ↗
51. Formation and control of sharp {100}<021> texture in electrical steel10.1016/S1006-706X(06)60045-9 ↗
52. {001}<210> Texture Development by Two-stage Cold RollingMethod in Non-oriented Electrical Steel10.2355/isijinternational.37.1263 ↗
53. Investigation of microstructure and properties of strip-cast 4.5 wt.% Si non-oriented electrical steel by different rolling processes10.1016/j.jmmm.2019.165975 ↗
54. Development of through-thickness cube recrystallization texture in non-oriented electrical steels by optimizing nucleation environment10.1007/s11661-019-05167-3 ↗
55. Nucleation of a {111} recrystallized grain at the grain boundary of cold rolled polycrystalline iron10.2320/matertrans1960.28.251 ↗
56. Effect of initial grain size on texture evolution and magnetic properties in nonoriented electrical steels10.1016/j.jmmm.2008.12.015 ↗
57. Low core loss non-oriented silicon steels10.1016/j.jmmm.2008.04.054 ↗
58. The influence of microstructural features of individual grains on texture formation by strain-induced boundary migration in non-oriented electrical steels10.1007/s10853-013-7863-y ↗
59. Effect of warm rolling on the rolling and recrystallization textures of non-oriented 3% Si steel10.2355/isijinternational.51.1545 ↗
60. Influence of thermomechanical processing on shear bands formation and magnetic properties of a 3% Si non-oriented electrical steel10.1016/j.jmmm.2011.07.015 ↗
61. Evolution of recrystallization texture in non-oriented electrical steels during final annealing–influence of shear stress after cold rolling10.1088/1742-6596/1270/1/012007 ↗
62. Warm deformation and annealing behaviour of iron–silicon–(carbon) steel sheets10.1016/j.actamat.2015.05.018 ↗
63. Yong, Q.L. (2006). Secondary Phases in Steels, Metallurgical Industry Press.
64. The effects of inclusions in steel on MnS precipitation in Fe-Si alloys10.2355/tetsutohagane1955.87.11_700 ↗
65. The growth of MnS precipitates in Fe-Si alloys10.2355/tetsutohagane1955.88.9_493 ↗
66. Influence of sulfur content and deformation temperature on precipitation behavior of MnS in 3% Si steel10.2355/tetsutohagane1955.89.5_518 ↗
67. Strain-induced nucleation of MnS in electrical steels10.1007/BF02675559 ↗
68. Du, Y. (2021). Effect on cooling rate on magnetic properties of Fe-3.4 wt.% Si Non-oriented electrical steel, submitted for publication.10.1007/s00339-022-05902-5 ↗
69. Consequences of magnetic aging for iron losses in electrical steels10.1016/j.jmmm.2006.02.185 ↗
70. Magnetic aging effect losses on electrical steels10.1109/TMAG.2016.2517942 ↗
71. Magnetic aging anisotropy of a semi-processed non-oriented electrical steel10.1016/j.msea.2004.08.066 ↗
72. Effect of manganese and sulfur on the texture and magnetic properties of non-oriented steel10.1109/TMAG.1977.1059560 ↗
73. Effects of manganese and sulfur contents and slab reheating temperatures on the magnetic properties of non-oriented semi-processed electrical steel sheet10.1016/S0304-8853(01)00208-6 ↗
74. Effect of rare earth elements on magnetic properties of non-oriented electrical steels10.1016/j.jmmm.2022.169624 ↗
75. Effect of calcium treatment on magnetic properties of non-oriented electrical steels10.1016/j.jmmm.2019.165803 ↗
76. Effects of Boron and Zirconium on microstructure and magnetic properties of batch annealed Al-Killed low carbon steels10.1109/TMAG.1985.1064036 ↗
77. The effect of boron content on the processing for Fe–6.5 wt.% Si electrical steel sheets10.1016/j.jmmm.2003.11.012 ↗
78. Effect of boron content on the microstructure and magnetic properties of non-oriented electrical steels10.1007/s11595-015-1191-9 ↗
79. Distribution of boron at austenite grain boundaries and bainitic transformation in low carbon steels10.2355/isijinternational1966.13.210 ↗
80. The role of solutes in the secondary recrystallization of silicon iron10.1109/TMAG.1977.1059579 ↗
81. Nonoriented electrical steel sheet with low iron loss for high-efficiency motor cores10.1109/20.737481 ↗
82. Microstructure and plasticity improvement of Nb-microalloyed high-silicon electrical steel10.1007/s10853-021-06651-1 ↗
83. 2019 Effect of Partial Recrystallization Annealing on Magnetic Properties and Mechanical Properties of Non-Oriented Silicon Steel
84. Effect of antimony of energy losses in non-oriented 1.8 Si, 0.3 Al electrical sheets10.1016/0304-8853(91)90192-D ↗
85. A new non-oriented Si-steel with texture of {100}10.1016/0304-8853(80)90554-5 ↗
86. Effect of Antimony on Recrystallization Behavior and Magnetic Properties of a Nonoriented Silicon Steel10.1007/BF02645109 ↗
87. Texture improvement in high-permeability nonoriented electrical steel by antimony addition10.1007/BF02660293 ↗
88. Magnetic properties of high-efficiency core materials NC-M3 and NC-M410.1007/BF02648620 ↗
89. Effect of Sn on Primary Recrystallization Texture of Fe-Si Alloy10.4028/www.scientific.net/MSF.204-206.539 ↗
90. Effect of phosphorus on the magnetic properties of non-oriented electrical steel containing 0.8 wt.% silicon10.1016/S0304-8853(97)00651-3 ↗
91. Magnetic properties and recrystallization texture evolutions of phosphorus-bearing non-oriented electrical steel sheets10.2355/isijinternational.47.1666 ↗
92. Magnetic properties and recrystallization texture of phosphorus-added non-oriented electrical steel sheets10.1016/j.jmmm.2006.02.155 ↗
93. Effect of phosphorus on the magnetic losses of non-oriented 2% Si steel10.2355/isijinternational.52.1162 ↗
94. Influences of trace additions of strontium and phosphorus on electrical resistivity and viscosity of liquid Al-Si alloys
95. Assessment of the textured state of the nonoriented electrical steel for electromobiles and the effect of the texture on the basic magnetic characteristics10.1134/S0031918X20070030 ↗
96. Application of grain-oriented electrical steel used in super-high speed electric machines10.1063/1.5130151 ↗