Review of Propulsion System Design Strategies for Unmanned Aerial Vehicles
Source abstract
Abstract
The design of the propulsion system for Unmanned Aerial Vehicles (UAVs) demands an inclusive multidisciplinary approach from the earliest design phases, since every design choice strictly affects and is affected by the overall working conditions. This paper presents a review of the scientific literature focused on the design methods applied in defining and sizing the propulsion system of drones. The analysis, performed with a systematic approach, evaluated 123 papers according to two custom classification taxonomies, which investigated respectively the primary aim and specific content of the works. Finally, literature indications and hints were combined into an integrated framework for the functional design of the propulsion system of UAVs. The procedure aimed to support the designer in the preliminary selection of the propulsion candidates and the quick sizing of the supply system, during the first phases of the design process. According to the literature, design methods dramatically change depending on the expected applications and working conditions of UAVs, so that the detailed design of specific drone elements and propulsion components represents the focus of most of the papers in this field.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Robotic Path Planning Algorithms · Aerospace Engineering and Control Systems · Rocket and propulsion systems research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Industrial Engineering, University of Brescia, Via Branze, 38, 25123 Brescia, Italy
Department of Information Engineering, University of Brescia, Via Branze, 38, 25123 Brescia, Italy
Imbal Carton s.r.l., Via Gardesana, 54, 25080 Prevalle, Italy
Department of Civil, Environmental, Architectural Engineering and Mathematics, University of Brescia, Via Branze, 43, 25123 Brescia, Italy
Funding
Regione Lombardia
References (100+)
Show source-provided references
1. Schroth, L., Bödecker, H., and Radovic, M. (2020, June 01). Drone Market Report 2020–2025. Technical Report. Available online: https://droneii.com/.10.1016/j.focat.2020.09.003 ↗
2. Classifications, applications, and design challenges of drones: A review10.1016/j.paerosci.2017.04.003 ↗
3. Kahn, J.M., Katz, R.H., Fellow, A., and Pister, K.S.J. (1999, January 15–19). Next Century Challenges: Mobile Networking for “Smart Dust”. Proceedings of the 5th Annual ACM/IEEE international Conference on Mobile Computing and Networking, Seattle, WA, USA.10.1145/313451.313558 ↗
4. Szafranski, G., Czyba, R., and Blachuta, M. (2014). Modeling and identification of electric propulsion system for multirotor unmanned aerial vehicle design. IEEE Comput. Soc., 470–476.10.1109/ICUAS.2014.6842287 ↗
5. Design methodology of a hybrid propulsion driven electric powered miniature tailsitter unmanned aerial vehicle10.1007/s10846-009-9368-0 ↗
6. (2000). Uninhabited Air Vehicles: Enabling Science for Military Systems, National Academies Press.
7. General optimal design of solar-powered unmanned aerial vehicle for priority considering propulsion system10.1016/j.cja.2020.04.009 ↗
8. Aksugur, M., Inalhan, G., and Beard, R. (2008). Hybrid propulsion system design of a VTOL tailsitter UAV. SAE Tech. Pap.10.4271/2008-01-2242 ↗
9. Bershadsky, D., Haviland, S., and Johnson, E. (2015). Electric Multirotor Propulsion System Sizing for Performance Prediction and Design Optimization, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2016-0581 ↗
10. Zhao, X., Zhou, Z., and Zhu, X. (2018). Design of a Lift-Propulsion VTOL UAV System, Institute of Electrical and Electronics Engineers Inc.10.1109/ICMA.2018.8484448 ↗
11. Dantsker, O., Caccamo, M., and Imtiaz, S. (2020). Propulsion System Design, Optimization, Simulation, and Testing for a Long-Endurance Solar-Powered Unmanned Aircraft, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2020-3966 ↗
12. Design and analysis of a linear servo-actuated variable-span morphing wing10.13111/2066-8201.2020.12.4.7 ↗
13. Saemi, F., Benedict, M., and Beals, N. (2020, January 6–8). Development of a brushless DC motor sizing algorithm for a small UAS design framework. Proceedings of the Vertical Flight Society’s 76th Annual Forum and Technology Display, Fairfax, VA, USA.10.4050/F-0076-2020-16341 ↗
14. Siswoyo Jo, R., Tan, A., Tee Kit Tsun, M., and Siswoyo Jo, H. (2020). Design and modeling of actuation system of unmanned tricopter with thrust-vectoring front tilt rotors for sustainable flying. Proceedings of the International Conference of Aerospace and Mechanical Engineering 2019, Springer.10.1007/978-981-15-4756-0_5 ↗
15. Guo, D., Bacciaglia, A., Ceruti, A., Marzocca, P., and Bil, C. (2018). Design and Development of a Transition Propulsion System for Bimodal Unmanned Vehicles, Institute of Electrical and Electronics Engineers Inc.10.1109/ICUAS.2018.8453356 ↗
16. Castaneda, H., Cantu, L., Leal, A., and Gordillo, J. (2017). Guidelines for Propulsion System Design and Implementation in a Quadrotor MAV, Institute of Electrical and Electronics Engineers Inc.10.1109/ICUAS.2017.7991359 ↗
17. Kotarski, D., Piljek, P., Brezak, H., and Kasać, J. (2017). Design of a Fully Actuated Passively Tilted Multirotor UAV with Decoupling Control System, Institute of Electrical and Electronics Engineers Inc.10.1109/ICMAE.2017.8038677 ↗
18. Heim, M., Pyne, K., Bialy, A., Burns, M., Mohan, G., Beaty, N., MacNeal, C., Weit, C., Brady Doepke, E., and Kevorkian, C. (2015). Design and demonstration of a flexible matrix composite actuated flap in a UAV. Am. Soc. Mech. Eng., 2.10.1115/SMASIS2015-9033 ↗
19. Li, Y., Liu, L., Ma, X., and Tu, H. (2012). Design of Hybrid Electric Propulsion System for Long Endurance Small UAV, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2012-4241 ↗
20. Simulation, design, and validation of an UAV SOFC propulsion system10.1109/TAES.2012.6237610 ↗
21. Preliminary design of a hybrid propulsion system for high-endurance UAV
22. Hiserote, R., and Harmon, F. (2010). Analysis of Hybrid-Electric Propulsion System Designs for Small Unmanned Aircraft Systems, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2010-6687 ↗
23. Lindahl, P., Moog, E., and Shaw, S. (2009). Simulation, design and validation of a UAV SOFC propulsion system. IEEE Trans. Aerosp. Electron. Syst.10.1109/AERO.2009.4839597 ↗
24. Design of an electric propulsion system for a quadrotor unmanned aerial vehicle10.2514/1.38409 ↗
25. Soban, D., and Upton, E. (2005). Design of a UAV to Optimize Use of Fuel Cell Propulsion Technology, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2005-7135 ↗
26. Optimal Design of Outer-Rotor Surface Mounted Permanent Magnet Synchronous Motor for Cogging Torque Reduction Using Territory Particle Swarm Optimization10.1007/s42835-020-00599-z ↗
27. Zhang, H., Song, B., Li, F., and Xuan, J. (2021). Multidisciplinary design optimization of an electric propulsion system of a hybrid UAV considering wind disturbance rejection capability in the quadrotor mode. Aerosp. Sci. Technol., 110.10.1016/j.ast.2020.106372 ↗
28. Design optimization of rotor propulsive delta wing
29. Anastasopoulos, L., and Hornung, M. (2018). Design of a Real-Time Test Bench for UAV Servo Actuators, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2018-3735 ↗
30. Optimal ECO-design of permanent magnet Brushless DC motor using modified tabu search optimizer and finite element analysis10.4283/JMAG.2015.20.2.161 ↗
31. Ullah, S., Khan, Q., Mehmood, A., Kirmani, S., and Mechali, O. (2021). Neuro-adaptive fast integral terminal sliding mode control design with variable gain robust exact differentiator for under-actuated quadcopter UAV. ISA Trans.10.1016/j.isatra.2021.02.045 ↗
32. Effects of unmodelled dynamic factors on an under-actuated quadrotor: A review of hybrid observer design methods10.1177/0020294020964236 ↗
33. Pavkovic, D., Krznar, M., Cipek, M., Zorc, D., and Trstenjak, M. (2020). Internal Combustion Engine Control System Design Suitable for Hybrid Propulsion Applications, Institute of Electrical and Electronics Engineers Inc.10.1109/ICUAS48674.2020.9214002 ↗
34. Robust Integral Sliding Mode Control Design for Stability Enhancement of Under-actuated Quadcopter10.1007/s12555-019-0302-3 ↗
35. Van Treuren, K., Sanchez, R., Wisniewski, C., and Leitch, P. (2020). Investigation of Aeroacoustics and Motor Efficiency of a Two-Bladed Stock and Five-Bladed Propeller Designs for Static Quadcopter Applications, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2020-3955 ↗
36. Yang, T., Wang, S., and Yang, J. (2020). Design of High-Power Dual-Redundancy Electro-Mechanical Actuator for Scout and Strike UAV, Institute of Physics Publishing.10.1088/1757-899X/790/1/012159 ↗
37. Cheng, P., Cai, C., and Zou, Y. (2019). Finite Time Fault Tolerant Control Design for UAV Attitude Control Systems with Actuator Fault and Actuator Saturation, Elsevier B.V.10.1016/j.ifacol.2019.12.380 ↗
38. An analytical design-optimization method for electric propulsion systems of multicopter UAVs with desired hovering endurance10.1109/TMECH.2019.2890901 ↗
39. Gebauer, J., Wagnerová, R., Smutný, P., and Podešva, P. (2019). Controller Design for Variable Pitch Propeller Propulsion Drive, Elsevier B.V.10.1016/j.ifacol.2019.12.754 ↗
40. Design and modeling of a micro turbojet engine for UAV propulsion
41. Kasem, A., Gamal, A., Hany, A., Gaballa, H., Ahmed, K., Romany, M., Abdelkawy, M., and Abdelrahman, M. (2019). Design and implementation of an unmanned aerial vehicle with self-propulsive wing. Adv. Mech. Eng., 11.10.1177/1687814019857299 ↗
42. Lee, H.S., Cha, H.R., Yang, S.H., Kim, D.H., Lee, G.S., and Kim, H.W. (2019). Optimal Design and Analysis of Interior Permanent Magnet Motor for High-Thrust Drone, Institute of Electrical and Electronics Engineers Inc.10.1109/ITEC-AP.2019.8903660 ↗
43. Mallavalli, S., and Fekih, A. (2019). A Fault Tolerant Control Design for Actuator Fault Mitigation in Quadrotor UAVS, Institute of Electrical and Electronics Engineers Inc.10.23919/ACC.2019.8815190 ↗
44. Nigro, M., Pierri, F., and Caccavale, F. (2019). Preliminary Design, Modeling and Control of a Fully Actuated Quadrotor UAV, Institute of Electrical and Electronics Engineers Inc.10.1109/ICUAS.2019.8798092 ↗
45. Oukassi, S., Poncet, S., Frutos, J., and Salot, R. (2019). Design, Microfabrication and Characterization of Free form Factor, Lightweight thin Film Battery for Powering Bioinspired Nano-Drones Based on MEMS Actuation, Institute of Physics Publishing.10.1088/1742-6596/1407/1/012036 ↗
46. Wang, S., Song, B., He, L., and Lang, X. (2019). Modeling and Robust Attitude Controller Design of a Distributed Propulsion Tilt-Wing UAV in Hovering Flight, Institute of Electrical and Electronics Engineers Inc.10.1109/CCDC.2019.8832344 ↗
47. Wang, S., Song, B., and He, L. (2018). Robust Attitude Control System Design for a Distributed Propulsion Tilt-Wing UAV in Flight State Transition. Asia-Pacific International Symposium on Aerospace Technology, Springer.10.1007/978-981-13-3305-7_190 ↗
48. Zhang, Z., Ma, T., Hao, S., Wang, Z., and Liu, Y. (2019). Design of A Distributed Propulsion VTOL UAV, Institute of Electrical and Electronics Engineers Inc.10.1109/ICUS48101.2019.8996070 ↗
49. Franz-Michael, S., Philipp, S., Christian, R., and Mirko, H. (2018). Design and Testing of an Electric Actuated Airbrake for Dynamic Airspeed Control of an Unmanned Aeroelastic Research Vehicle, American Institute of Aeronautics and Astronautics Inc.
50. Shavin, M. (2018). Design and identification of tilt-motor quadrotor control system. EDP Sci., 211.10.1051/matecconf/201821102013 ↗
51. He, Y., Woolston, M., and Perreault, D. (2017). Design and Implementation of a Lightweight High-Voltage Power Converter for Electro-Aerodynamic Propulsion, Institute of Electrical and Electronics Engineers Inc.10.1109/COMPEL.2017.8013315 ↗
52. Kimaru, J., and Bouferrouk, A. (2017). Design, Manufacture and Test of a Camber Morphing Wing Using MFC Actuated Mart rib, Institute of Electrical and Electronics Engineers Inc.10.1109/ICMAE.2017.8038751 ↗
53. Lu, W., Zhang, D., Zhang, J., Li, T., and Hu, T. (2017). Design and Implementation of a Gasoline-Electric Hybrid Propulsion System for a Micro Triple Tilt-Rotor VTOL UAV, Institute of Electrical and Electronics Engineers Inc.10.1109/DDCLS.2017.8068112 ↗
54. Qian, M., and Gao, Z. (2017). Adaptive Fault Tolerant Control Design for UAV with Multiple Actuator Faults, Institute of Electrical and Electronics Engineers Inc.
55. T-S fuzzy Model-Based adaptive controller design for UAV with actuator saturation
56. Yu, X., Li, P., and Zhang, Y. (2017). Fault-tolerant control design against actuator faults with application to UAV formation flight. IEEE Comput. Soc., 7167–7171.10.23919/ChiCC.2017.8028487 ↗
57. Performance of coaxial propulsion in design of multi-rotor UAVs10.1007/978-3-319-29357-8_46 ↗
58. Giernacki, W. (2016). Near to Optimal Design of PID Fractional-Order Speed Controller (FOPID) for Multirotor Motor-Rotor Simplified Model, Institute of Electrical and Electronics Engineers Inc.10.1109/ICUAS.2016.7502516 ↗
59. Kawai, Y., and Uchiyama, K. (2016). Design of Frequency Shaped LQR Considering Dynamic Characteristics of the Actuator, Institute of Electrical and Electronics Engineers Inc.10.1109/ICUAS.2016.7502630 ↗
60. Li, Y., Xiang, S., Wang, S., Huang, J., Zhao, Y., and Guo, J. (2016). Research on Optimization Design of UAV Main Propulsion Motor Based on Particle Swarm Optimization Algorithm, Institute of Electrical and Electronics Engineers Inc.10.1109/ICMA.2016.7558954 ↗
61. An Actuator Fault Detection and Isolation method design for Planar Vertical Take-off and Landing Unmanned Aerial Vehicle modelled as a qLPV system
62. Self-Healing Control Design under Actuator Fault Occurrence on Single-rotor Unmanned Helicopters10.1007/s10846-016-0341-4 ↗
63. Grannan, N., and Gutmark, E. (2015). An Off-Design Analysis of an Inverse Brayton Cycle Based UAV Propulsion System, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2015-0628 ↗
64. Theilliol, D., Weber, P., Chamseddine, A., and Zhang, Y. (2015). Optimization-Based Reliable Control Allocation Design for Over-Actuated Systems, Institute of Electrical and Electronics Engineers Inc.10.1109/ICUAS.2015.7152415 ↗
65. Wąsik, M., and Skarka, W. (2015). Design Optimization of Electric Propulsion of Flying Exploratory Autonomous Robot, IOS Press BV.
66. Xu, Q., Yang, H., Jiang, B., Zhou, D., and Zhang, Y. (2013, January 28–31). Adaptive fault-tolerant control design for UAVs formation flight under actuator faults. Proceedings of the 2013 International Conference on Unmanned Aircraft Systems (ICUAS), Atlanta, GA, USA.10.1109/ICUAS.2013.6564799 ↗
67. Fault tolerant control design for hypersonic UAV attitude dynamical systems with actuator faults
68. Design, simulation and analysis of a parallel hybrid electric propulsion system for unmanned aerial vehicles
69. Design of a blended wing body UAS with hybrid propulsion
70. Yu, K., Guo, H., Wang, D., and Li, L. (2007, January 8–11). Design of multi-redundancy electro-mechanical actuator controller with DSP and FPGA. Proceedings of the 2007 International Conference on Electrical Machines and Systems (ICEMS), Seoul, Korea.
71. Tang, L., Kacprzynski, G., Roemer, M., Vachtsevanos, G., and Patterson-Hine, A. (2005). Automated Contingency Management Design for Advanced Propulsion Systems, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2005-7001 ↗
72. Chew, F., Gan, S., and Hesse, H. (2021). Rapid Design Process of Shrouded Rotors for Efficient UAV Propulsion, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2021-0212 ↗
73. Conceptual design of a low—Cost linear actuator for variable span wing application10.13111/2066-8201.2021.13.1.7 ↗
74. Liben, M., and Ludois, D. (2021). Analytical Design and Experimental Testing of a Self-Cooled, Toroidally Wound Ring Motor with Integrated Propeller for Electric Rotorcraft. IEEE Trans. Ind. Appl.10.1109/TIA.2021.3058197 ↗
75. Zhao, A., Zhang, J., Li, K., and Wen, D. (2021). Design and implementation of an innovative airborne electric propulsion measure system of fixed-wing UAV. Aerosp. Sci. Technol., 109.10.1016/j.ast.2020.106357 ↗
76. Research on integrated optimization design method of high-efficiency motor propeller system for UAVs with multi-states10.1109/ACCESS.2020.3014411 ↗
77. Interconnection and Damping Assignment Passivity-Based Control Design Under Loss of Actuator Effectiveness10.1007/s10846-020-01170-8 ↗
78. Marcolini, F., De Donato, G., Giulii Capponi, F., Incurvati, M., and Caricchi, F. (2020). Design of a Multiphase Coreless Axial Flux Permanent Magnet Machine for Unmanned Aerial Vehicle Propulsion, Institute of Electrical and Electronics Engineers Inc.10.1109/ECCE44975.2020.9235625 ↗
79. Observer Design for Actuator Failure of a Quadrotor10.1109/ACCESS.2020.3017522 ↗
80. Anzai, T., Zhao, M., Murooka, M., Shi, F., Okada, K., and Inaba, M. (2019). Design, Modeling and Control of Fully Actuated 2D Transformable Aerial Robot with 1 DoF Thrust Vectorable Link Module, Institute of Electrical and Electronics Engineers Inc.10.1109/IROS40897.2019.8967725 ↗
81. Dai, W., Li, W., and Wan, F. (2019). Dual Redundancy Design of Brushless DC Motor for UAV Steering Gear, Institute of Electrical and Electronics Engineers Inc.10.1109/SDPC.2018.8664873 ↗
82. Guan, W., and Shi, P. (2019). Design of Fault Tolerant Control System for Four-Rotor UAV Actuator Failure, Institute of Electrical and Electronics Engineers Inc.10.1109/CCDC.2019.8832672 ↗
83. Guiatni, M., Saidani, H., and Bouzid, Y. (2019). Fault Tolerant Control Design for Actuator Loss of Effectiveness in Quadrotor Uavs, Institute of Electrical and Electronics Engineers Inc.10.1109/RUSAUTOCON.2019.8867636 ↗
84. Liben, M., and Ludois, D. (2019). Analytical Design of an Easily Manufacturable, Air-Cooled, Toroidally Wound Permanent Magnet Ring Motor with Integrated Propeller for Electric Rotorcraft, Institute of Electrical and Electronics Engineers Inc.10.1109/ECCE.2019.8912577 ↗
85. Priatmoko, M., and Nirbito, W. (2019). Design Analysis of Ducted Propeller for Bicopter Drone Propulsion, Institute of Physics Publishing.10.1088/1757-899X/685/1/012008 ↗
86. Qian, M., Zhai, L., Zhong, G., and Gao, Z. (2019). Adaptive Backstepping Fault Tolerant Controller Design for UAV with Multiple Actuator Faults, Institute of Electrical and Electronics Engineers Inc.10.1109/SAFEPROCESS45799.2019.9213263 ↗
87. Control design for an under-actuated UAV model10.5937/fmet1804443D ↗
88. Kang, Y., Lim, B., Rhee, D., Jun, S., Park, T., Lee, Y., and Jun, Y. (2018). Design of turbo-compression system for Hale UAV propulsion system. Am. Soc. Mech. Eng., 2.10.1115/FEDSM2018-83354 ↗
89. Liu, B., and Jiao, Z. (2018). LQR Lateral-Directional Control Law Design for Distributed Propulsion Layout Flying Wing, Institute of Electrical and Electronics Engineers Inc.10.1109/ICCIS.2017.8274866 ↗
90. Mallavalli, S., and Fekih, A. (2018). Adaptive Fault Tolerant Control Design for Actuator Fault Mitigation in Quadrotor UAVs, Institute of Electrical and Electronics Engineers Inc.10.1109/CCTA.2018.8511427 ↗
91. Xu, X., and Deng, Y. (2018). UAV Power Component—DC Brushless Motor Design with Merging Adjacent-Disturbances and Integrated-Dispatching Pigeon-Inspired Optimization. IEEE Trans. Magn., 54.10.1109/TMAG.2018.2839663 ↗
92. Bougas, L., Rößler, C., and Hornung, M. (2017). Design and Experimental Validation of a Propulsion Duct for a Jet Propelled Low Observable Scaled UAV Demonstrator, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2017-4378 ↗
93. Gong, A., and Verstraete, D. (2017). Design and Bench Test of a Fuel-Cell/Battery Hybrid UAV Propulsion System Using Metal Hydride Hydrogen Storage, American Institute of Aeronautics and Astronautics Inc.10.2514/6.2017-4867 ↗
94. Kamaruzaman, N., and Abdullah, E. (2017). Design and Testing of Shape Memory Alloy Actuation Mechanism for Flapping Wing Micro Unmanned Aerial Vehicles, Institute of Physics Publishing.10.1088/1757-899X/270/1/012017 ↗
95. Design and flight test of the generic micro-aerial vehicle (GenMAV) utilizing piezoelectric conformal flight control actuation10.1177/1045389X17698590 ↗
96. Zhu, M., Xia, L., Hu, Y., Chen, J., and Song, X. (2017). Design of Compact Smart Actuator, Institute of Electrical and Electronics Engineers Inc.
97. The Flying Platform—A testbed for ducted fan actuation and control design10.1016/j.mechatronics.2017.01.001 ↗
98. Parvez Alam, P., Manoharan, D., Chandramohan, S., Chakkath, S., and Maurya, S. (2017). Design, Development & Testing of Test Rig Setup for UAV Propulsion System. SAE Tech. Pap., 2017.
99. Zhu, M., Xia, L., Hu, Y., Zhang, W., Ji, D., and Song, X. (2017). Air cooling analysis and design of impacted flexible actuator’s servo controller based on PLECS. EDP Sci., 108.10.1051/matecconf/201710810003 ↗
100. Zulkipli, A., Raj, T., Hashim, F., and Huddin, A. (2017). Characterization of DC Brushless Motor for an Efficient Multicopter Design, Institute of Electrical and Electronics Engineers Inc.