journal article·2019-03-29Open access

Effects of Temperature on the Relationship between Mode-I Fracture Toughness and Tensile Strength of Rock

Gan Feng, Xiao-chuan Wang, Yong Kang, Shi-gang Luo, Yao-qing Hu

Applied Sciences· Volume 9· Issue 7

Abstract

Fracture toughness is used to characterize rock resistance to fracturing and it is important in theoretical research and engineering applications. Mode-I fracture toughness can be predicted on the basis of an empirical relationship between fracture toughness (KIC) and tensile strength (σt). In underground engineering, rocks are often subjected to different temperatures. Therefore, this paper explores the effect of temperature on the relationship between mode-I fracture toughness and tensile strength. The results show that the change trends in the KIC and σt values of rocks at temperatures from 20 °C to 600 °C are broadly consistent with each other. For rocks heat-treated to the same temperature, the KIC of the rock increases with an increase in σt. This positive correlation between KIC and σt is different in rocks heat-treated to different temperatures. Critical crack propagation radius (rIC) is an important factor in the relationship between KIC and σt and is related to the type of rock and the conditions under which it is tested. For the same rock, rIC is quite different after it has been exposed to different temperatures. The positive correlation between KIC and σt results from a similarity in the fracture morphology and properties of failure when rock is destroyed in fracture and tensile tests.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Rock Mechanics and Modeling · Landslides and related hazards · Geophysical Methods and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hubei Key Laboratory of Waterjet Theory and New Technology, Wuhan University, Wuhan 430072, China

Department of Energy and Mineral Engineering, Pennsylvania State University, University Park, PA 16802, USA

The Key Laboratory of Safety for Geotechnical and Structural Engineering of Hubei Province, School of Civil Engineering, Wuhan University, Wuhan 430072, China

School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China;

Institute of Mining Technology, Taiyuan University of Technology, Taiyuan 030024, China

Funding

National Natural Science Foundation of China · National Key Basic Research Development Program of China (973 Program)

References (49)

Show source-provided references
1. Geothermal exploitation from hot dry rocks via recycling heat transmission fluid in a horizontal well10.1016/j.energy.2017.04.027 ↗
2. Evaluation of coal Combustion zone and gas energy recovery for underground coal gasification (UCG) process10.1021/acs.energyfuels.6b01922 ↗
3. Mining-induced coal permeability change under different mining layouts10.1007/s00603-016-0979-z ↗
4. The influence of temperature on mode I fracture toughness and fracture characteristics of sandstone10.1007/s00603-017-1226-y ↗
5. The influence of temperature on mixed-mode (I+II) and mode-II fracture toughness of sandstone10.1016/j.engfracmech.2017.07.007 ↗
6. ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen10.1007/s00603-013-0422-7 ↗
7. Effects of thermal treatment on fracture characteristics of granite from Beishan, a possible high-level radioactive waste disposal site in China10.1016/j.engfracmech.2017.04.043 ↗
8. An improved definition for mode I and mode II crack problems10.1016/j.engfracmech.2017.01.027 ↗
9. Interactions of multiple cracks in a transversely isotropic piezoelectric plane under mixed mode condition10.1016/j.engfracmech.2017.05.031 ↗
10. The use of the point load test for the rapid estimation of mode I fracture toughness10.1016/S0148-9062(99)00015-7 ↗
11. Whittaker, B.N., Singh, R.N., and Sun, G. (1992). Rock Fracture Mechanics—Principles, Design and Applications, Elsevier Science Publisher.
12. Experimental relations between rock fracture toughness and density10.1016/S1365-1609(97)80042-1 ↗
13. Coupled evolutions of fracture toughness and elastic wave velocities at high crack density in thermally treated Westerly granite10.1016/j.ijrmms.2006.09.008 ↗
14. A comparative evaluation of rock strength measures10.1016/0148-9062(84)92680-9 ↗
15. Mode I fracture toughness of coal10.1007/BF00880769 ↗
16. Haberfield, C., and Johnston, I. (1989, January 13–18). Relationship between fracture toughness and tensile strength for geomaterials. Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering (SMFE 1989), Rio De Janeiro, Brazil.
17. Fracture toughness of compacted cohesive soills using ring test10.1061/(ASCE)0733-9410(1994)120:5(872) ↗
18. An empirical relation between mode I fracture toughness and the tensile strength of rock10.1016/S1365-1609(02)00032-1 ↗
19. Experimental study on fracture toughness and tensile strength of clay10.1016/j.enggeo.2007.06.005 ↗
20. Discussion on “Experimental study on fracture toughness and tensile strength of a clay” [Engineering Geology 94 (2007) 64–75]10.1016/j.enggeo.2008.07.001 ↗
21. Study of mode-I fracture toughness and its correlation with strength parameters of sandstone
22. The controlled failure of rock discs and rings loaded in diametral compression10.1016/0148-9062(72)90025-3 ↗
23. Suggested methods for determining tensile strength of rock materials10.1016/0148-9062(78)90003-7 ↗
24. Mechanical and elastic properties of transversely isotropic slate10.1007/s00603-013-0488-2 ↗
25. Correlating mode-I fracture toughness and mechanical properties of heat-treated crystalline rocks10.1016/j.jrmge.2017.09.009 ↗
26. Effects of thermal treatment on tensile strength of Laurentian granite using Brazilian test10.1007/s00603-015-0712-3 ↗
27. Influence of thermal treatment on mode I fracture toughness of certain Indian rocks10.1016/j.enggeo.2016.06.008 ↗
28. Laboratory investigation on physical and mechanical properties of granite after heating and water-cooling treatment10.1007/s00603-017-1350-8 ↗
29. Yu, M., and Fan, S.C. (1998). The relationship between the fracture toughness and tensile strength of rock. Strength Theories: Applications, Development and Prospects for 21st Century, Science Press.
30. Effect of thermal cracking damage on the deformation and failure of granite
31. Wang, G.D. (2003). Experiment Research on the Effects of Temperature and Viscoelastoplastic Analysis of Beishan Granite, Xi’an Institute of Science and Technology. (In Chinese).
32. Cheng, J., and Zhao, S.S. (2006). Fracture Mechanics, Science Press. (In Chinese).
33. Xu, Z.L. (2016). Elasticity Mechanics, Higher Education Press. (In Chinese).
34. On the crack extension path in plates under plane loading and transverse shear10.1115/1.3656897 ↗
35. Strain energy release rate for a crack under combined model I and mode II
36. A modified MTS criterion (MMTS) for mixed-mode fracture toughness assessment of brittle materials10.1016/j.msea.2010.05.014 ↗
37. Cracked Brazilian disc specimen subjected to mode II deformation10.1016/j.engfracmech.2004.05.002 ↗
38. A micromechanical model for brittle failure of rock and its relation to crack growth observed in triaxial compression tests of granite10.1016/j.mechmat.2005.07.003 ↗
39. Micromechanical modelling of the mechanical properties of a granite under dynamic uniaxial compressive loads10.1016/S1365-1609(00)00025-3 ↗
40. Numerical simulation of the excavation damaged zone around an opening in brittle rock10.1016/j.ijrmms.2006.12.005 ↗
41. Combined mode fracture via the cracked Brazilian disk10.1007/BF00015688 ↗
42. Fracture toughness and subcritical crack growth during high-temperature tensile deformation of Westerly granite and Black gabbro10.1016/0031-9201(85)90113-X ↗
43. Effect of heat-treated and layer orientation on the tensile strength of a crystalline rock under Brazilian test condition10.1007/s00603-015-0891-y ↗
44. Effects of high temperatures on dynamic rock fracture10.1016/S1365-1609(00)00071-X ↗
45. A theoretical and experimental evaluation of the Griffith theory of brittle fracture10.1016/0040-1951(71)90060-6 ↗
46. When does a crack grow under mode II conditions?10.1007/BF00034020 ↗
47. Crack growth and development during creep of Barre Granite10.1016/0148-9062(79)90772-1 ↗
48. Failure of granite under compression10.1016/0148-9062(77)90950-0 ↗
49. Development of stress-induced microcracks in Westerly granite10.1016/0148-9062(76)91937-9 ↗