Overview of Predictive Control Technology for Permanent Magnet Synchronous Motor Systems
Source abstract
Abstract
Permanent magnet synchronous motors (PMSMs) are commonly used in the automation industry. With the speedy development of digital system processors, predictive control as a modern control scheme has been applied to improve the dynamic performance and work efficiency of PMSMs. This paper provides an overview of the research status of PMSM-based predictive control strategies. The deficiencies of the three most popular predictive schemes, deadbeat predictive control, finite-control-set model predictive control, and continuous-control-set model predictive control, and existing improvement strategies such as delay compensation schemes, robust control schemes, and multi-vector control schemes, are summarized. Finally, current technological trends are discussed, emphasizing future research directions for predictive control in PMSM drive systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Multilevel Inverters and Converters · Sensorless Control of Electric Motors · Advanced DC-DC Converters
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Automobile and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China
References (100+)
Show source-provided references
1. Diagnosis of Open-Phase Faults for a Five-Phase PMSM Fed by a Closed-Loop Vector-Controlled Drive Based on Magnetic Field Pendulous Oscillation Technique10.1109/TIE.2020.3000109 ↗
2. Efficient feedback linearization control for an IPMSM of EVs based on improved firefly algorithm10.1016/j.isatra.2022.08.013 ↗
3. Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications
4. An indirect reference vector-based model predictive control for a three-phase PMSM motor10.1109/ACCESS.2020.2968949 ↗
5. Sequential subspace optimization design of a dual three-phase permanent magnet synchronous hub motor based on NSGA III10.1109/TTE.2022.3190536 ↗
6. Re-Use and Recycling of Different Electrical Machines
7. Design of Bearingless Flux-Switching Permanent-Magnet Motor
8. Multiobjective optimization of a five-phase bearingless permanent magnet motor considering winding area10.1109/TMECH.2021.3121802 ↗
9. Hybrid Differential Evolution Algorithm Employed for the Optimum Design of a High-Speed PMSM Used for EV Propulsion10.1109/TIE.2017.2701788 ↗
10. A novel four degree-of-freedoms bearingless permanent magnet machine using modified cross feedback control scheme for flywheel energy storage systems
11. Mathematical Modeling of a 12-Phase Flux-Switching Permanent-Magnet Machine for Wind Power Generation10.1109/TIE.2015.2461514 ↗
12. An adaptive ECMS based on traffic information for plug-in hybrid electric buses10.1109/TIE.2022.3210549 ↗
13. A Nine-Phase Permanent Magnet Electric-Drive-Reconstructed Onboard Charger for Electric Vehicle10.1109/TEC.2018.2844793 ↗
14. Torque analysis and dynamic performance improvement of A PMSM for EVs by skew angle optimization10.1109/TASC.2018.2882419 ↗
15. Speed Control of Bearingless Permanent Magnet Synchronous Motor Based on Flux Strengthening and Voltage Regulation10.1109/ACCESS.2018.2880276 ↗
16. Compensated deadbeat predictive current control considering disturbance and VSI nonlinearity for in-wheel PMSMs10.1109/TMECH.2021.3135936 ↗
17. A novel svpwm scheme for field-oriented vector-controlled PMSM drive system fed by cascaded H-bridge inverter10.1109/TPEL.2021.3054642 ↗
18. An adaptive proportional integral-resonant controller for speed ripple suppression of PMSM drive due to current measurement error10.1016/j.ijepes.2021.106866 ↗
19. Finite-control-set model predictive control of permanent magnet synchronous motor drive systems—An overview10.1109/JAS.2022.105851 ↗
20. Field-Oriented Control and Direct Torque Control for Paralleled VSIs Fed PMSM Drives with Variable Switching Frequencies10.1109/TPEL.2015.2437893 ↗
21. Maximum Torque Per Ampere Control in Stator Flux Linkage Synchronous Frame for DTC-Based PMSM Drives without Using q-Axis Inductance10.1109/TIA.2017.2686800 ↗
22. Sliding mode direct torque control of SPMSMs based on a hybrid wolf optimization algorithm10.1109/TIE.2021.3080220 ↗
23. Remedial Strategies of T-NPC Three-Level Asymmetric Six-Phase PMSM Drives Based on SVM-DTC10.1109/TIE.2017.2682796 ↗
24. A novel technique for estimation and control of stator flux of a salient-pole PMSM in DTC method based on MTPF10.1109/TIE.2003.811591 ↗
25. Speed sensorless control of SPMSM drives for EVs with a binary search algorithm-based phase-locked loop10.1109/TVT.2020.2981422 ↗
26. An Enhanced Linear Active Disturbance Rejection Rotor Position Sensorless Control for Permanent Magnet Synchronous Motors10.1109/TPEL.2019.2953162 ↗
27. Speed sensorless control for permanent magnet synchronous motors based on finite position set10.1109/TIE.2019.2947875 ↗
28. Speed Sensor Fault Tolerant PMSM Machines: From Position-Sensorless to Sensorless Control10.1109/TIA.2019.2908337 ↗
29. Novel Carrier Signal Injection Method Using Zero-Sequence Voltage for Sensorless Control of PMSM Drives10.1109/TIE.2016.2593657 ↗
30. Speed sensorless control for IPMSMs using a modified MRAS with gray wolf optimization algorithm10.1109/TTE.2021.3093580 ↗
31. A Composite Sliding Mode Control for SPMSM Drives Based on a New Hybrid Reaching Law with Disturbance Compensation10.1109/TTE.2021.3052986 ↗
32. Adaptive Speed Control of PMSM Drive System Based a New Sliding-Mode Reaching Law10.1109/TPEL.2020.2986893 ↗
33. Torque ripple reduction for a 12/8 switched reluctance motor based on a novel sliding mode control strategy10.1109/TTE.2022.3161078 ↗
34. A New Reaching Law for Antidisturbance Sliding-Mode Control of PMSM Speed Regulation System10.1109/TPEL.2019.2933613 ↗
35. Position sensorless control of switched reluctance motor drives based on a new sliding mode observer using Fourier flux linkage model10.1109/TEC.2021.3125494 ↗
36. Controllability and Performance of a Nine-Phase FSPM Motor under Severe Five Open-Phase Fault Conditions10.1109/TEC.2015.2486521 ↗
37. Robust Design Optimization of a Five-Phase PM Hub Motor for Fault-Tolerant Operation Based on Taguchi Method10.1109/TEC.2020.2989438 ↗
38. Adaptive Fault-Tolerant Control for Open-Circuit Faults in Dual Three-Phase PMSM Drives10.1109/TPEL.2022.3223411 ↗
39. Sensorless control with fault-tolerant ability for switched reluctance motors10.1109/TEC.2021.3119928 ↗
40. Fault-Tolerant Control of Dual Three-Phase PMSM Drives with Minimized Copper Loss10.1109/TPEL.2021.3076509 ↗
41. Sun, X., Zhu, Y., Cai, Y., Xiong, Y., Yao, M., and Yuan, C. (2023). Current fault tolerance control strategy for 3-phase switched reluctance motor combined with position signal reconstruction. IEEE Trans. Energy Convers., 1–11.10.1109/TEC.2023.3239525 ↗
42. Predictive common-mode voltage suppression method based on current ripple for permanent magnet synchronous motors10.1109/JESTPE.2019.2896158 ↗
43. A cascade MPC control structure for a PMSM with speed ripple minimization10.1109/TIE.2012.2201432 ↗
44. Fault-tolerant operation of a six-phase permanent magnet synchronous hub motor based on model predictive current control with virtual voltage vectors10.1109/TEC.2021.3109869 ↗
45. Torque Ripple Minimization of Predictive Torque Control for PMSM With Extended Control Set10.1109/TIE.2017.2686320 ↗
46. MPTC for PMSMs of EVs with multi-motor driven system considering optimal energy allocation
47. Multiple Current Harmonics Suppression for Low-Inductance PMSM Drives with Deadbeat Predictive Current Control10.1109/TIE.2022.3144577 ↗
48. Deadbeat Predictive Control for PMSM Drives with 3-L NPC Inverter Accounting for Saturation Effects10.1109/JESTPE.2018.2796123 ↗
49. A robust deadbeat predictive controller with delay compensation based on composite sliding mode observer for PMSMs10.1109/TPEL.2021.3063226 ↗
50. FPGA Implementation of a Novel Oversampling Deadbeat Controller for PMSM Drives10.1109/TIE.2018.2851994 ↗
51. Driving-cycle oriented design optimization of a permanent magnet hub motor drive system for a four-wheel-drive electric vehicle10.1109/TTE.2020.3009396 ↗
52. IEEE Access Special Section Editorial: Millimeter-Wave and Terahertz Propagation, Channel Modeling, and Applications10.1109/ACCESS.2021.3076326 ↗
53. Asymmetry Three-Level Gird-Connected Current Hysteresis Control With Varying Bus Voltage and Virtual Oversample Method10.1109/TPEL.2013.2272466 ↗
54. Hysteresis Model Predictive Control for High-Power Grid-Connected Inverters with Output LCL Filter10.1109/TIE.2015.2477060 ↗
55. Hysteresis Voltage Prediction Control for Multilevel Converter in the Series-Form Switch-Linear Hybrid Envelope Tracking Power Supply10.1109/TPEL.2020.2994907 ↗
56. Predictive Position Control of Planar Motors Using Trajectory Gradient Soft Constraint with Attenuation Coefficients in the Weighting Matrix10.1109/TIE.2020.3005103 ↗
57. Hierarchical Control of Trajectory Planning and Trajectory Tracking for Autonomous Parallel Parking10.1109/ACCESS.2021.3093930 ↗
58. Predictive Trajectory Control of Permanent-Magnet Synchronous Machines with Nonlinear Magnetics10.1109/TIE.2016.2527628 ↗
59. Multi-objective design optimization of an IPMSM based on multilevel strategy10.1109/TIE.2020.2965463 ↗
60. Analytical rotor position estimation for SRM based on scaling of reluctance characteristics from torque-balanced measurement10.1109/TIE.2016.2645144 ↗
61. A new decoupled analytical modeling method for switched reluctance machine
62. Finite-state model predictive current control for surface-mounted permanent magnet synchronous motors based on current locus10.1109/ACCESS.2017.2771418 ↗
63. An improved model predictive current control for PMSM drives based on current track circle10.1109/TIE.2020.2984433 ↗
64. Model predictive direct torque control with finite control set for PMSM drive systems, Part 1: Maximum torque per ampere operation10.1109/TII.2012.2227265 ↗
65. Modified model predictive torque control for a PMSM-drive with torque ripple minimisation10.1049/iet-pel.2018.5525 ↗
66. Novel predictive stator flux control techniques for PMSM drives10.1109/TPEL.2018.2884984 ↗
67. Model predictive direct speed control with torque oscillation reduction for PMSM drives10.1109/TII.2019.2898004 ↗
68. Disturbance-observer based control and related methods—An overview10.1109/TIE.2015.2478397 ↗
69. A discrete-time predictive current control for PMSM10.1109/TPEL.2002.807131 ↗
70. Predictive Direct Power Control of Three-Phase Pulsewidth Modulation (PWM) Rectifier Using Space-Vector Modulation (SVM)10.1109/TPEL.2009.2028731 ↗
71. Robust Cascaded Deadbeat Predictive Control for Dual Three-Phase Variable-Flux PMSM Considering Intrinsic Delay in Speed Loop10.1109/TIE.2022.3142400 ↗
72. Deadbeat Predictive Current Control for High-Speed Permanent Magnet Synchronous Machine Drives with Low Switching-To-Fundamental Frequency Ratios10.1109/TIE.2021.3078383 ↗
73. Time-Optimal and Loss-Minimizing Deadbeat-Direct Torque and Flux Control for Interior Permanent-Magnet Synchronous Machines10.1109/TIA.2013.2287313 ↗
74. Robust Deadbeat Predictive Current Regulation for Permanent Magnet Synchronous Linear Motor Drivers with Parallel Parameter Disturbance and Load Observer10.1109/TPEL.2022.3148389 ↗
75. An improved deadbeat predictive stator flux control with reduced-order disturbance observer for in-wheel PMSMs10.1109/TMECH.2021.3068973 ↗
76. Current prediction error based parameter identification method for SPMSM with deadbeat predictive current control10.1109/TEC.2021.3051212 ↗
77. An impedance model-based multiparameter identification method of pmsm for both offline and online conditions10.1109/TPEL.2020.3000896 ↗
78. An Improved Deadbeat Predictive Current Control with Online Parameter Identification for Surface-Mounted PMSMs10.1109/TIE.2019.2960755 ↗
79. Current-Controller-Free Self-Commissioning Scheme for Deadbeat Predictive Control in Parametric Uncertain SPMSM10.1109/ACCESS.2020.3043751 ↗
80. Robustness Improvement of Predictive Current Control Using Prediction Error Correction for Permanent-Magnet Synchronous Machines10.1109/TIE.2016.2521734 ↗
81. Modified Model Predictive Control of a Bidirectional AC–DC Converter Based on Lyapunov Function for Energy Storage Systems10.1109/TIE.2015.2478752 ↗
82. Analysis and design of repetitive controller based on regeneration spectrum and sensitivity function in active power filter system10.1049/iet-pel.2013.0614 ↗
83. A New Model-Free Deadbeat Predictive Current Control for PMSM Using Parameter-Free Luenberger Disturbance Observer10.1109/JESTPE.2022.3192883 ↗
84. Enhanced robust deadbeat predictive current control for PMSM drives10.1109/ACCESS.2019.2946972 ↗
85. Improved Deadbeat Predictive Current Control Combined Sliding Mode Strategy for PMSM Drive System10.1109/TVT.2017.2752778 ↗
86. Deadbeat Predictive Current Control for SPMSM at Low Switching Frequency with Moving Horizon Estimator10.1109/JESTPE.2019.2960579 ↗
87. Zynq Implemented Luenberger Disturbance Observer Based Predictive Control Scheme for PMSM Drives10.1109/TPEL.2019.2920439 ↗
88. Improved deadbeat predictive current control of dual three-phase variable-flux PMSM drives with composite disturbance observer10.1109/TPEL.2022.3141375 ↗
89. An Improved Deadbeat Predictive Current Control Scheme for Open-Winding Permanent Magnet Synchronous Motors Drives with Disturbance Observer10.1109/TPEL.2020.3024227 ↗
90. Fast speed control of AC machines without the proportional-integral controller: Using an extended high-gain state observer10.1109/TPEL.2018.2889862 ↗
91. Model Predictive Thrust Force Control for Linear Motor Actuator used in Active Suspension10.1109/TEC.2021.3069843 ↗
92. Predictive Torque and Flux Control without Weighting Factors10.1109/TIE.2012.2206344 ↗
93. A Very Simple Strategy for High-Quality Performance of AC Machines Using Model Predictive Control10.1109/TPEL.2018.2812833 ↗
94. Generalized Sequential Model Predictive Control of IM Drives with Field-Weakening Ability10.1109/TPEL.2018.2886206 ↗
95. Tolerant Sequential Model Predictive Direct Torque Control of Permanent Magnet Synchronous Machine Drives10.1109/TTE.2020.3008828 ↗
96. Algebraic Tuning Guidelines for Model Predictive Torque and Flux Control10.1109/TIA.2018.2835375 ↗
97. Predictive Torque Control of Permanent Magnet Synchronous Motors Using Flux Vector10.1109/TIA.2018.2833817 ↗
98. Multi objective switching state selector for finite states model predictive control based on fuzzy decision making in a matrix converter10.1109/TIE.2012.2206343 ↗
99. Weighting factors optimization of predictive torque control of induction motor by multi objective genetic algorithm10.1109/TPEL.2018.2834304 ↗
100. Improved Model Predictive Torque Control for PMSM Drives Based on Duty Cycle Optimization