journal article·2022-08-29Open access

Low-Cost Microwave Sensor for Characterization and Adulteration Detection in Edible Oil

Muhammad Hamza Bhatti, Muhammad Abdul Jabbar, Muhammad Atif Khan, Yehia Massoud

Applied Sciences· Volume 12· Issue 17

Abstract

A low-cost microwave sensor was designed for oil adulteration detection and characterization of pure edible oil using dielectric spectroscopy. The sensor’s final design was fabricated on a low cost 1.6 mm thick FR-4 substrate with a combination of a complementary split ring resonator and a transmission line. The sensor’s dimensions were 35 × 30 × 1.6 mm3 with a substrate dielectric constant of 4.3. A 5.25 GHz resonance frequency was selected as a reference for characterization and adulteration detection in pure edible oil. Initially, pure olive, caster, flaxseed, and mustard oil were characterized by the design sensors, with frequency shifts of 250, 370, 150, and 320 MHz, respectively. Pure olive oil with adulteration of castor, mustard, and argemone oil, was tested by placing the samples directly on the sensor. The experimental results showed that the sensor can detect 10% to 30% adulteration in the olive oil. The maximum sensitivity, frequency shift and quality factor were noted as 4.6, 530 MHz and 39, respectively. The high values of sensitivity and quality factor, along with agreement between simulated and experimental results, makes our sensor a good candidate for oil characterization and adulteration detection.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microwave and Dielectric Measurement Techniques · Spectroscopy and Chemometric Analyses · Advanced Fiber Optic Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Innovative Technologies Laboratories (ITL), King Abdullah University of Science and Technology (KAUST), Thuwal 23955, Saudi Arabia

Funding

King Abdullah University of Science and Technology (KAUST)

References (37)

Show source-provided references
1. Planar Microwave Sensors for Accurate Measurement of Material Characterization: A Review10.12928/telkomnika.v15i3.6684 ↗
2. Modeling and Design Challenges and Solutions for Carbon Nanotube-Based Interconnect in Future High Performance Integrated Circuits10.1145/1167943.1167944 ↗
3. Understanding the Impact of Inductance in Carbon Nanotube Bundles for VLSI Interconnect using Scalable Modeling Techniques10.1109/TNANO.2006.883480 ↗
4. On the Optimal Design, Performance, and Reliability of Future Carbon Nanotube-Based Interconnect Solutions10.1109/TED.2008.926733 ↗
5. Optical range microcavities and filters using multiple dielectric layers in metal-insulator-metal structures10.1364/JOSAA.24.000221 ↗
6. A low-loss metal-insulator-metal plasmonic bragg reflector10.1364/OE.14.011318 ↗
7. Modeling and design methodology for metal-insulator-metal plasmonic Bragg reflectors10.1364/OE.16.001475 ↗
8. Optimizing Dielectric Strips Over a Metallic Substrate for Subwavelength Light Confinement10.1109/LPT.2007.893827 ↗
9. Muñoz-Enano, J., Vélez, P., Gil, M., and Martín, F. (2020). Planar Microwave Resonant Sensors: A Review and Recent Developments. Appl. Sci., 10.10.3390/app10072615 ↗
10. Microwave Sensors Based on Coplanar Waveguide Loaded with Split Ring Resonators: A Review
11. Industrial microwave sensors—A review10.1023/A:1010118609079 ↗
12. Nanoscale surface plasmon based resonator using rectangular geometry10.1063/1.2734380 ↗
13. Design of a maximally flat optical low pass filter using plasmonic nanostrip waveguides10.1364/OE.15.015280 ↗
14. Massoud, Y., Majors, S., Bustami, T., and White, J. (1998, January 15–19). Layout Techniques for Minimizing On-Chip Interconnect Self Inductance. Proceedings of the 35th IEEE/ACM Design Automation Conference, San Francisco, CA, USA.10.1145/277044.277194 ↗
15. Managing On-Chip Inductive Effects10.1109/TVLSI.2002.807763 ↗
16. Detection of volatile organic compounds using microwave sensors10.1109/JSEN.2014.2345477 ↗
17. Simulation and Modeling of the Effect Substrate Conductivity on Coupling Inductance and Circuit Crosstalk10.1109/TVLSI.2002.1043331 ↗
18. Grasping the Impact of On-Chip Inductance in High Speed ICs10.1109/101.950046 ↗
19. Hosseini, A., Ragheb, T., and Massoud, Y. (2008, January 18–21). A Fault-Aware Dynamic Routing Algorithm for On-Chip Networks. Proceedings of the 2008 IEEE International Symposium on Circuits and Systems, Seattle, WA, USA.10.1109/ISCAS.2008.4542002 ↗
20. Efficient simulation of subwavelength plasmonic waveguides using implicitly restarted Arnoldi10.1364/OE.14.007291 ↗
21. RLC ladder model for scattering in single metallic nanoparticles10.1109/TNANO.2006.880403 ↗
22. A closed-form analytical model for single nanoshells10.1109/TNANO.2006.874050 ↗
23. Massoud, Y., Kawa, J., MacMillen, D., and White, J. (2001, January 18–22). Modeling and Analysis of Differential Signaling for Minimizing Inductive Cross-Talk. Proceedings of the 38th IEEE/ACM Design Automation Conference, Las Vegas, NE, USA.10.1145/378239.379070 ↗
24. On the Impact of Process Variations for Carbon Nanotube Bundles for VLSI Interconnect10.1109/TED.2006.890364 ↗
25. A low-cost multiple complementary split-ring resonator-based microwave sensor for contactless dielectric characterization of liquids10.1109/JSEN.2020.2998004 ↗
26. Massoud, Y., and White, J. (2002, January 10–14). Improving the Generality of the Fictitious Magnetic Charge Approach to Computing Inductances in the Presence of Permeable Materials. Proceedings of the IEEE/ACM Design Automation Conference, New Orleans, LA, USA.10.1145/513918.514057 ↗
27. Massoud, Y., and White, J. (2002, January 10–14). FastMag: A 3-D Fast Inductance Extraction Program for Structures with Permeable materials. Proceedings of the IEEE/ACM International Conference on Computer Aided Design, San Jose, CA, USA.10.1109/ICCAD.2002.1167575 ↗
28. Massoud, Y., Alam, M., and Nieuwoudt, A. (2006, January 27–29). On the Selection of Spectral Zeros for Generating Passive Reduced Order Models. Proceedings of the International Workshop on System-on-Chip for Real-Time Applications, Cairo, Egypt.10.1109/IWSOC.2006.348228 ↗
29. Microwave metamaterial-based sensor for dielectric characterization of liquids10.3390/s18051513 ↗
30. A generalized rectangular cavity approach for determination of complex permittivity of materials10.1109/TIM.2014.2313415 ↗
31. Ultrahigh-Sensitivity Microwave Sensor for Microfluidic Complex Permittivity Measurement10.1109/TMTT.2019.2932737 ↗
32. Novel Improved Sensitivity Planar Microwave Probe for Adulteration Detection in Edible Oils10.1109/LMWC.2018.2886062 ↗
33. Muhammed Shafi, K.T., Jha, A.K., and Akhtar, M.J. (2016, January 5–9). Non-destructive technique for detection of adulteration in edible oils using planar RF sensor. Proceedings of the 2016 IEEE MTT-S International Microwave and RF Conference (IMaRC), New Delhi, India.10.1109/IMaRC.2016.7939636 ↗
34. Kakani, P.N., Chandu, D.S., and Karthikeyan, S.S. (2019, January 22–24). Open complementary split ring resonator based RF sensor with improved sensitivity for detection and estimation of adulteration in edible oils. Proceedings of the 2019 TEQIP III Sponsored International Conference on Microwave Integrated Circuits, Photonics and Wireless Networks (IMICPW), Tiruchirappalli, India.10.1109/IMICPW.2019.8933244 ↗
35. Equivalent-circuit models for split-ring resonators and complementary split-ring resonators coupled to planar transmission lines10.1109/TMTT.2005.845211 ↗
36. Review of recent microwave planar resonator-based sensors: Techniques of complex permittivity extraction, applications, open challenges and future research directions10.3390/s21072267 ↗
37. Microwave ring resonator-based non-contact interface sensor for oil sands applications10.1016/j.snb.2015.10.061 ↗