Shape Modelling and Volume Optimisation of Salt Caverns for Energy Storage
Source abstract
Abstract
Salt caverns are an attractive solution to the growing energy demand in view of their large storage capacity, safety of storage operation and long operation time. The designing process of salt caverns is still considered a complex issue despite progress in geotechnical, construction and exploration methods. Finding the optimal shape and dimensions of a salt cavern in given geological conditions is a difficult engineering problem in view of safety and stability requirements. In this paper, the stability of typical cavern shapes (cylindrical, enlarged top, and enlarged bottom), with each of the three variants differing by their diameter, was evaluated against the stability factors of the geological conditions of the bedded salt deposit. Moreover, the analysed shapes were examined in terms of edges. The three-step smoothing of sharp edges was performed, and its impact on the cavern’s stability performance was studied. Moreover, the analysis aimed to find the optimal cavern shape and volume in the implemented geological conditions. The evaluation was based on the following criteria: the displacement, effective strain, von Mises stress, strength/stress ratio and safety factor. The results of this evaluation can be useful in the design of an optimal cavern shape and volume and for planning new cavern fields for storing natural gas, compressed air or hydrogen in the bedded salt deposits.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geotechnical Engineering and Analysis · Methane Hydrates and Related Phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mining and Geoengineering, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Cracow, Poland
References (49)
Show source-provided references
1. Feasibility analysis of using closely spaced caverns in bedded rock salt for underground gas storage: A case study10.1007/s12665-016-5944-3 ↗
2. Geomechanical investigation of roof failure of China’s first gas storage salt cavern10.1016/j.enggeo.2018.06.013 ↗
3. Deformation characteristics of rock salt with mudstone interbeds surrounding gas and oil storage cavern10.1016/j.ijrmms.2011.06.012 ↗
4. Stability of interbed for salt cavern gas storage in solution mining considering cusp displacement catastrophe theory10.1016/j.petlm.2015.03.006 ↗
5. Repair of irregularly shaped salt cavern gas storage by re-leaching under gas blanket10.1016/j.jngse.2017.07.004 ↗
6. Modeling the construction of energy storage salt caverns in bedded salt10.1016/j.apenergy.2019.113866 ↗
7. Large-scale hydrogen energy storage in salt caverns10.1016/j.ijhydene.2012.07.111 ↗
8. Geologic storage of hydrogen: Scaling up to meet city transportation demands10.1016/j.ijhydene.2014.07.121 ↗
9. Hydrogen generation by electrolysis and storage in salt caverns: Potentials, economics and systems aspects with regard to the German energy transition10.1016/j.ijhydene.2017.02.102 ↗
10. Renewable energy storage in geological formations10.1177/0957650917731181 ↗
11. Bruno, M.S., and Durseault, M.B. (2002, January 29–30). 2002, Geomechanical Analysis of Prersure Limits for Thin Bedded Salt Caverns. Proceedings of the SMRI Spring Technical Meeting, Banff, AB, Canada.
12. Zhang, Y., Shi, X., Ma, H., Yang, C., Ye, L., Han, Y., and Zhang, N. (2018, January 17–20). Research on the Limit Operating Prersure of a Bedded Salt Gas Storage Cavern: A Case Study. Proceedings of the 52nd U.S. Rock Mechanics/Geomechanics Symposium, Seattle, WA, USA.
13. Determination of the maximum allowable gas prersure for an un-derground gas storage salt cavern e A case study of Jintan, China10.1016/j.jrmge.2018.10.004 ↗
14. Bruno, M.S. (2005). Geomechanical Analysis and Design Considerations for Thin-Bedded Salt Caverns: Final Report, Terralog Technologies.
15. Bruno, M.S., Dorfmann, L., Han, G., Lao, K., and Young, J.T. (2005, January 1–5). 3D geomechanical analysis of multiple caverns in bedded salt. Proceedings of the SMRI Fall Technical Meeting, Nancy, France.
16. DeVries, K.L., Mellegard, K.D., and Callahan, G.D. (2002, January 29–30). Proof-of-concept research on a salt damage criterion for cavern design: A project status report. Proceedings of the SMRI Spring Technical Meeting, Banff, AB, Canada.
17. Effects of very low permeability on the long-term evolution of a storage cavern in rock salt10.1016/S0148-9062(99)00018-2 ↗
18. In situ rock salt permeability measurement for long term safety arsersment of storage10.1016/S0148-9062(99)00017-0 ↗
19. Minkley, M., and Muehlbauer, J. (2007, January 22–25). Constitutive models to describe the mechanical behaviour of salt rocks and the imbedded weakness planes. Proceedings of the 6th Conference on the Mechanical Behavior of Salt-SALTMECH 6, Hannover, Germany.
20. Investigation on porsibility of energy storage in salt rock in China
21. Influence of the Anhydrite Interbeds on a Stability of the Storage Caverns in the Mechelinki Salt Deposit (Northern Poland)
22. Comprehensive feasibility study of two-well-horizontal caverns for natural gas storage in thinly-bedded salt rocks in China10.1016/j.energy.2017.10.126 ↗
23. Stability study and optimization design of small-spacing two-well (RSTW) salt caverns for natural gas storages10.1016/j.est.2019.101131 ↗
24. The optimal shape of rectangular-like caverns10.1016/0148-9062(95)00006-3 ↗
25. Rock mechanical design of storage caverns for natural gas in rock salt mass10.1016/S1365-1609(97)00199-8 ↗
26. Ehgartner, B.L., and Sobolik, S.R. (2006). Analysis of Cavern Shapes for the Strategic Petroleum Reserve, Office of Scientific and Technical Information (OSTI).10.2172/888563 ↗
27. Cai, M., and Wang, J. (2008). Effects of geometrical characteristic on cavern integrity for the underground gas storage. Boundaries of Rock Mechanics: Recent Advances and Challenges for the 21st Century, CRC Press.
28. Design of salt caverns for the storage of natural gas, crude oil and compressed air: Geomechanical aspects of construction, operation and abandonment10.1144/SP313.7 ↗
29. A new shape design method of salt cavern used as underground gas storage10.1016/j.apenergy.2012.11.037 ↗
30. The optimal geometric shape of the inverted pear-like gas storage cavern in bedded salt based on the sta-bility
31. Insight into a shape of salt storage caverns
32. Onal, E. (2013). Stability Analyses of Differently Shaped Salt Caverns for Underground Natural Gas Storage. [Master’s Thesis, The Penn-sylvania State University].
33. Safety evaluation of salt cavern gas storage close to an old cavern10.1016/j.ijrmms.2016.01.005 ↗
34. Feasibility analysis of using horizontal caverns for underground gas storage: A case study of Yunying salt district10.1016/j.jngse.2016.10.009 ↗
35. Peterson, R.E. (1974). Strers Concentration Factors, John Wiley & Sons.
36. Timoshenko, S.P., and Goodier, J.N. (1987). Theory of Elasticity, McGraw-Hill. [3rd ed.].
37. Methodology of 3D structure modelling of sedimentary stratiform mineral deposits-a case of the Mechelinki Zechstein salt deposit at the Puck Bay
38. Dilatancy of rock salt in laboratory tests10.1016/0148-9062(93)90015-6 ↗
39. Devries, K.L., Mellegard, K.D., Callahan, G.D., and Goodman, W.M. (2005). Cavern Roof Stability for Natural Gas Storage in Bedded Salt, Office of Scientific and Technical Information (OSTI).10.2172/850074 ↗
40. DeVries, K.L. (May, January 30). Geomechanical analyses to determine the onset of dilation around natural gas storage caverns in bedded salt. Proceedings of the SMRI Spring Technical Meeting, Brussels, Belgium.
41. Underground gas storage: Why and how
42. Feasibility analysis of using abandoned salt caverns for large-scale underground energy storage in China10.1016/j.apenergy.2014.07.048 ↗
43. Review and analysis of historical leakages from storage salt caverns wells10.2516/ogst/2018093 ↗
44. Coleman, H.P., Stroh, G., and Osnes, J. (2015, January 27–30). The Effects of Interbedded Salt & Potash on Cemented Casing at Dewdney Field. Proceedings of the SMRI Fall Technical Meeting, Santander, Spain.
45. Réveillère, A., Bérest, P., Evans, D.J., Stöwer, M., Chabannes, C., Koopmans, T., and Bolt, A.R. (2019). Past Salt Caverns Incidents Data-Base Part 1: Leakage, Overfilling and Blow-Out, Solution Mining Research Institute. SMRI Research Report RR2017-2.
46. Osnes, D.G., DeVries, K.L., Ratigan, J.L., Meece, M.W., Thompson, M., and Spencer, G.W. (2007, January 8–9). A Case History of the Threaded Cou-pling Production Casing Failure in Gas Caverns—Part 1: Detection and Geomechanical Analysis. Proceedings of the Solution Mining Research Institute Fall Meeting, Halifax, NS, Canada.
47. A new method of surface subsidence prediction for natural gas storage cavern in bedded rock salts10.1007/s12665-016-5611-8 ↗
48. Stope Stability Assessment and Effect of Horizontal to Vertical Stress Ratio on the Yielding and Relaxation Zones Around Underground Open Stopes Using Empirical and Finite Element Methods
49. Nonlinear finite-element analysis of solution mined storage caverns in rock saltusing the LUBBY2 constitutive model10.1016/S0045-7949(02)00415-7 ↗