Heat Transfer Analysis and Effects of (Silver and Gold) Nanoparticles on Blood Flow Inside Arterial Stenosis

The current investigation was based on a simulation employing CFD in COMSOL Multiphysics. The base fluid that was used in this simulation was blood. The flow was considered as a laminar, unsteady and incompressible Newtonian fluid, and the Newtonian nature of blood is acceptable at high shear rate. The behavior of blood flow was analyzed with the objective of obtaining pressure, temperature and velocity effects through an arterial stenosis. Two types of nanoparticles were used in this work: silver (Ag) and gold (Au). The equations of mass, momentum and energy were solved by utilizing the CFD technique. A fine element size mesh was generated through COMSOL. The results of this analysis show that velocity changes through confined parts of the artery, the velocity in a diseased region is higher and the velocity decreases before and after the stenotic region. In the heat transfer feature, the upper and lower boundary temperature was set to 24.85 °C and 27.35 °C, respectively. The nanoparticles affected the physical properties of blood, such as thermal conductivity, density, dynamic viscosity and specific heat. The addition of gold and silver nanoparticles prevented overheating because both nanoparticles have a high thermal conductivity, which has a principal role in dissipating temperature quickly. Nusselt number variations were also calculated and the results show that the curve decreases inside the stenosis. It could be concluded that the streamlines show abnormal behavior and recirculation occurs just after the stenosed area at t = 0.7 s and 1 s. These results will help greatly in the treatment of stenosed arteries.