Mechanical and Thermal Behavior of Ultem® 9085 Fabricated by Fused-Deposition Modeling
Source abstract
Abstract
Fused-deposition modeling (FDM) is an additive manufacturing technique which is widely used for the fabrication of polymeric end-use products in addition to the development of prototypes. Nowadays, there is an increasing interest in the scientific and industrial communities for new materials showing high performance, which can be used in a wide range of applications. Ultem 9085 is a thermoplastic material that can be processed by FDM; it recently emerged thanks to such good properties as excellent flame retardancy, low smoke generation, and good mechanical performance. A deep knowledge of this material is therefore necessary to confirm its potential use in different fields. The aim of this paper is the investigation of the mechanical and thermal properties of Ultem 9085. Tensile strength and three-point flexural tests were performed on samples with XY, XZ, and ZX building orientations. Moreover, the influence of different ageing treatments performed by varying the maximum reached temperature and relative humidity on the mechanical behavior of Ultem 9085 was then investigated. The thermal and thermo-oxidative behavior of this material was also determined through thermal-gravimetric analyses.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Politecnico di Torino, Department of Applied Science and Technology, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
Pininfarina S.p.A., Via Nazionale 30, 10020 Cambiano, Italy
References (32)
Show source-provided references
1. Robotics and Computer-Integrated Manufacturing Design for manufacturing of surfaces to improve accuracy in Fused Deposition Modeling10.1016/j.rcim.2015.07.005 ↗
2. A new part consolidation method to embrace the design freedom of additive manufacturing10.1016/j.jmapro.2015.06.024 ↗
3. Technological Forecasting & Social Change The cost of additive manufacturing: Machine productivity, economies of scale and technology-push10.1016/j.techfore.2015.02.015 ↗
4. International, A. (2020). ASTM F2792-12a Standard Terminology for Additive Manufacturing Technologies, ASTM International.
5. Optimization of process parameters of FDM part for minimiizing its dimensional inaccuracy
6. Integration of FDM surface quality modeling with process design
7. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
8. Wang, X., Zhao, L., Ying, J., and Fuh, H. (2019). Effect of Porosity on Mechanical Properties of 3D Printed Polymers: Experiments and Micromechanical Modeling Based on X-ray Computed Tomography Analysis. Polymers, 11.10.3390/polym11071154 ↗
9. Deposition Strategies and Resulting Part Stiffnesses in Fused Deposition Modeling10.1115/1.2830582 ↗
10. Effect of initial fi lament moisture content on the microstructure and mechanical performance of ULTEM® 9085 3D printed parts
11. Mechanical properties analysis of polyetherimide parts fabricated by fused Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling10.1177/0954008317752822 ↗
12. Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament10.1016/j.jmapro.2018.11.023 ↗
13. Influence of processing and orientation print effects on the mechanical and thermal behavior of 3D-Printed ULTEM 9085 Material
14. (2020, February 03). Stratasys ULTEMTM 9085 Resin Datasheet. Available online: https://www.stratasys.com/it/materials/search/ultem9085.
15. Gebisa, A.W., and Lemu, H.G. (2018). Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment. Materials, 11.10.3390/ma11040500 ↗
16. Motaparti, K.P. (2016). Effect of build parameters on mechanical properties of ultem 9085 parts by fused deposition modeling. [Master’s Thesis, Missouri University of Science and Technology]. Available online: https://scholarsmine.mst.edu/masters_theses/7513.
17. Experimental investigation of effects of build parameters on flexural properties in fused deposition modelling parts10.1080/17452759.2017.1314117 ↗
18. Chuang, K.C., Grady, J.E., and Draper, R.D. (2015, January 26–29). Additive manufacturing and characterization of Ultem polymers and composites. Proceedings of the CAMX Conference Proceedings, Dallas, TX, USA.
19. Bagsik, A., and Schoppner, V. (2011, January 1–5). Mechanical Properties of Fused Deposition Modeling Pards with Ultem* 9085. Proceedings of the 69th Annual Technical Conference of the Society of Plastics Engineers (ANTEC’11), Boston, MA, USA.
20. Bagsik, A., Schoppner, V., and Klemp, E. (2010, January 15–17). FDM Part Quality Manufactured with Ultem * 9085. Proceedings of the 14th International Conference Polymeric Materials 2010, Halle, Germany.
21. Comparison of stress concentrator fabrication for 3D printed polymeric izod impact test specimens
22. Cicala, G., Ognibene, G., Portuesi, S., Blanco, I., Rapisarda, M., Pergolizzi, E., and Recca, G. (2018). Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends. Materials, 11.10.3390/ma11020285 ↗
23. Effects of thermal process parameters on mechanical interlayer strength for additively manufactured Ultem 908510.1016/j.polymertesting.2019.106255 ↗
24. Bagsik, A., Schöppner, V., and Klemp, E. (2012, January 22). Long-term ageing effects on fused deposition modeling parts manufactured with ultem*9085. Proceedings of the 23rd Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, Austin, TX, USA.
25. Mechanical properties of ULTEM 9085 material processed by fused deposition modeling10.1016/j.polymertesting.2018.10.040 ↗
26. Temperature variations in a parked vehicle10.1016/j.forsciint.2010.10.009 ↗
27. Heat related deaths to young children in parked cars: An analysis of 171 fatalities in the United States, 1995–200210.1136/ip.2003.004044 ↗
28. Maximum vehicle cabin temperatures under different meteorological conditions10.1007/s00484-009-0211-x ↗
29. Badini, C., Padovano, E., and Lambertini, V.G. (2020). Preferred orientation of chopped fibers in polymer-based composites processed by selective laser sintering and fused deposition modeling: Effects on mechanical properties. J. Appl. Polym. Sci.10.1002/app.49152 ↗
30. (2020, March 09). Stratasys FDM Nylon 12CF FDM Nylon 12CF. Available online: https://www.stratasys.com/it/materials/search/fdm-nylon-12cf.
31. Thermal and thermo-oxidative stability and probable degradation mechanism of some polyetherimides10.1016/j.jaap.2016.01.012 ↗
32. Thermal degradation mechanism and kinetics of polycarbonate/silica nanocomposites10.1016/j.polymdegradstab.2014.05.012 ↗