Effect of Molybdenum on the Microstructures and Properties of Stainless Steel Coatings by Laser Cladding
Source abstract
Abstract
Stainless steel powders with different molybdenum (Mo) contents were deposited on the substrate surface of 45 steel using a 6 kW fiber laser. The microstructure, phase, microhardness, wear properties, and corrosion resistance of coatings with different Mo contents were studied by scanning electron microscopy (SEM), electron probe microanalyzer (EPMA), X-ray diffraction (XRD), microhardness tester, wear tester, and electrochemical techniques. The results show that good metallurgical bonding was achieved between the stainless steel coating and the substrate. The amount of M7(C, B)3 type borocarbide decreases and that of M2B and M23(C, B)6 type borocarbides increases with the increase of Mo content in the coatings. The amount of martensite decreases, while the amount of ferrite gradually increases with the increase of Mo content. When the Mo content is 4.0 wt. %, Mo2C phase appears in the coating. The microstructure of the coating containing Mo is finer than that of the Mo-free coating. The microhardness decreases and the wear resistance of the coating gradually improves with the increase of Mo content. The wear resistance of the 6.0 wt. % Mo coating is about 3.7 times that of the Mo-free coating. With the increase of Mo content, the corrosion resistance of the coating firstly increases and then decreases. When the Mo content is 2.0 wt. %, the coating has the best corrosion resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Tribology, Department of Mechanical Engineering, Tsinghua University, Haidian District, Beijing 100084, China
School of Materials Science and Engineering, Beijing University of Technology, Number 100, Pingle Garden, Chaoyang District, Beijing 100124, China
Institute of Laser Advanced Manufacturing, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China
Funding
National Natural Science Foundation of China · the Open Foundation of Key Laboratory of E&M (Zhejiang University of Technology), Ministry of Education & Zhejiang Province · the Tribology Science Fund of the State Key Laboratory of Tribology
References (48)
Show source-provided references
1. Effect of the exposure angle in the corrosion rate of plain carbon steel in a marine atmosphere10.1016/S0010-938X(02)00071-9 ↗
2. Development of microstructure and texture of medium carbon steel during heavy warm deformation10.1016/j.actamat.2004.01.024 ↗
3. Phase Diagram Calculation and Analyze on Cast High-Boron High-Speed Steel10.1007/s11665-015-1847-9 ↗
4. A review of the potential environmentally assisted failure mechanisms of austenitic stainless steel storage containers housing stabilized radioactive compounds10.1016/S0010-938X(00)00061-5 ↗
5. Friction and wear properties in dry, water-and oil-lubricated DLC against alumina and DLC against steel contacts10.1016/S0043-1648(98)00314-7 ↗
6. Study on Remote Control Underwater Welding Technology Applied in Nuclear Power Station10.1016/j.proeng.2011.08.927 ↗
7. Industrial laser cladding: Current state and future10.1080/09507116.2010.540880 ↗
8. Different Approaches to the Investigation and Testing of the Ni-Based Self-Fluxing Alloy Coatings—A Review. Part 1: General Facts, Wear and Corrosion Investigations10.1080/10402004.2014.927547 ↗
9. Microstructure and Wear Resistance of Laser Clad Fe-Cr3C2 Composite Coating on 35CrMo Steel10.1007/s11665-013-0708-7 ↗
10. Microstructure, Microhardness, and Residual Stress Analysis of Laser Surface Cladding of Low-Carbon Steel10.1081/AMP-120029854 ↗
11. Strengthening Effect of Incremental Shear Deformation on Ti Alloy Clad Plate with a Ni-Based Alloy Laser-Clad Layer10.1007/s11665-017-2615-9 ↗
12. Energy turnaround—A challenge for surface technology10.1080/00202967.2016.1209295 ↗
13. Effect of strengthening particles on the dry sliding wear behavior of Al2O3–M7C3/Fe metal matrix composite coatings produced by laser cladding10.1016/j.wear.2014.11.023 ↗
14. Laser cladding of continuous caster lateral rolls: Microstructure, wear and corrosion characterisation and on-field performance evaluation10.1016/j.jmatprotec.2014.02.027 ↗
15. Producing nanostructured Co–Cr–W alloy surface layer by laser cladding and friction stir processing10.1557/jmr.2015.28 ↗
16. Cladding with Stellite 6 + WC using a YAG laser robot system10.1179/174329406X98430 ↗
17. Effect of defocus manner on laser cladding of Fe-based alloy powder10.1016/j.surfcoat.2014.03.019 ↗
18. Corrosion Behavior of Thermally Sprayed NiCrBSi Coating on 16MnR Low-Alloy Steel in KOH Solution10.1007/s11665-016-2012-9 ↗
19. Microstructure and wear resistance of Fe-based WC coating by multi-track overlapping laser induction hybrid rapid cladding10.1016/j.optlastec.2011.06.017 ↗
20. Microstructure and wear properties of Fe–TiC surface composite coating by laser cladding10.1007/s10853-007-2350-y ↗
21. Influence of Al addition on microstructure and properties of Cu–Fe-based coatings by laser induction hybrid rapid cladding10.1557/jmr.2014.64 ↗
22. Microstructure and properties of laser cladding FeCrBSi composite powder coatings with higher Cr content10.1016/j.jmatprotec.2013.12.009 ↗
23. A new theoretical model for high power laser clad TiC/NiCrBSiC composite coatings on Ti6Al4V alloys10.1016/j.optlaseng.2010.03.016 ↗
24. Microstructure and Sliding Wear Resistance of Laser Cladded WC/Ni Composite Coatings with Different Contents of WC Particle10.1007/s11665-011-0109-8 ↗
25. Effect of Mo on the VC–VB particles reinforced Fe-based composite coatings10.1080/02670836.2016.1204084 ↗
26. Effects of Ti addition on microstructure homogenization and wear resistance of wide-band laser clad Ni60/WC composite coatings10.1016/j.ijrmhm.2016.11.002 ↗
27. Mechanical properties and toughening mechanism of TiB2/NiTi reinforced titanium matrix composite coating by laser cladding10.1016/j.matdes.2015.05.009 ↗
28. Mechanism of Rare Earth CeO2 on the Ni-Based Laser Cladding Layer of 6063 Al Surface
29. Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti–6Al–4V alloy10.1016/j.jallcom.2015.07.295 ↗
30. Influence of molybdenum on the microstructure and wear resistance of nickel-based alloy coating obtained by plasma transferred arc process10.1016/j.matdes.2006.04.005 ↗
31. Effect of molybdenum on the microstructure and wear resistance of Fe-based hardfacing coatings10.1016/j.msea.2007.12.020 ↗
32. Effect of Mo and nano-Nd2O3 on the microstructure and wear resistance of laser cladding Ni-based alloy coatings10.1007/s00339-016-9905-1 ↗
33. Microstructure and property of Ni60A/WC composite coating fabricated by fiber laser cladding10.1002/mawe.201500448 ↗
34. Growth mechanism, distribution characteristics and reinforcing behavior of (Ti, Nb)C particle in laser cladded Fe-based composite coating10.1016/j.apsusc.2014.08.052 ↗
35. Theory of microstructural development during rapid solidification10.1016/0001-6160(86)90056-8 ↗
36. Microstructure and Abrasive Wear Performance of Ni-Wc Composite Microwave Clad10.1007/s11665-015-1657-0 ↗
37. Effects of substrate crystallographic orientations on crystal growth and microstructure formation in laser powder deposition of nickel-based superalloy10.1016/j.actamat.2014.12.046 ↗
38. Effect of molybdenum on microstructure and properties of low alloy high strength steel
39. Effect of molybdenum on the microstructure and wear resistance of cobalt-base Stellite hardfacing alloys10.1016/S0257-8972(02)00853-8 ↗
40. Effects of cobalt on structure, microchemistry and properties of a wrought nickel-base superalloy10.1007/BF02643399 ↗
41. Solid-state fabrication of WC p-reinforced Stellite-6 composite coatings with supersonic laser deposition10.1016/j.surfcoat.2017.04.062 ↗
42. Microstructure of 10CrMnMo dual-phase steel under different intercritical quenching temperature
43. First-Principles Calculations Study on the Electronic Structures, Hardness and Debye Temperatures of Chromium Carbides
44. Microstructure and wear resistance of Mo /Ni-based alloy coating produced by plasma cladding
45. The effect of Mo content on the organization and the performance of the hypoeutectic high carbon, high chromium alloy
46. Impact wear-resistant hardfacing austenitic material
47. Analysis of affecting factors of wearing resistance of surfacing layer
48. Microstructure and corrosion resistance of FeCrNiMnMoxB0.5 high entropy alloy coating prepared by laser cladding