journal article·2016-07-29Open access

Relationship between Flowability, Entrapped Air Content and Strength of UHPC Mixtures Containing Different Dosage of Steel Fiber

Rui Wang, Xiaojian Gao

Applied Sciences· Volume 6· Issue 8

Abstract

This study investigated the effects of different fiber contents by volume (0%, 1%, 2%, and 3%) on flowability, entrapped air content, and compressive and flexural strength of ultra high performance concrete (UHPC). Four water-to-binder ratios (0.18, 0.20, 0.22, 0.24) were used and four different dosages of superplasticizer were introduced for preparing each water-to-binder ratio mixture. The experimental results reveal that the increased content of fiber decreases the flowability and entrapped air content of fresh UHPC mixtures. The compressive strength of UHPC increased with a greater addition of steel fiber, from 1% to 3%. The flexural strength was increased slightly by the addition of 1% steel fiber and increased remarkably with the addition of 2% and 3% steel fiber. For every water-to-binder ratio mixture, with and without steel fiber, a good linear relationship can be found between compressive strength and entrapped air content. Therefore, it is suggested that lowering the entrapped air provides a significant contribution to increasing compressive strength of UHPC containing higher steel fibers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Civil Engineering, Harbin Institute of Technology, Harbin 150090, China

Key Lab of Structures Dynamic Behavior and Control (Harbin Institute of Technology), Ministry of Education, Harbin 150090, China

Funding

National Natural Science Foundation of China

References (28)

Show source-provided references
1. Composition of reactive powder concretes10.1016/0008-8846(95)00144-2 ↗
2. Development of the mechanical properties of an Ultra-High Performance Fiber Reinforced Concrete (UHPFRC)10.1016/j.cemconres.2006.03.009 ↗
3. A review on ultra high performance concrete: Part II. Hydration, microstructure and properties10.1016/j.conbuildmat.2015.08.095 ↗
4. Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC)10.1016/j.cemconcomp.2015.11.005 ↗
5. A review on ultra high performance concrete: Part I. Raw materials and mixture design10.1016/j.conbuildmat.2015.10.088 ↗
6. The hydration and microstructure of ultra high-strength concrete with cement–silica fume–slag binder10.1016/j.cemconcomp.2015.04.013 ↗
7. Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses10.1016/j.cemconcomp.2014.09.024 ↗
8. Metakaolin in the formulation of UHPC10.1016/j.conbuildmat.2008.02.018 ↗
9. Hydration and microstructure of ultra high performance concrete incorporating rice husk ash10.1016/j.cemconres.2011.06.009 ↗
10. Early-Age Strength of Ultra-High Performance Concrete in Various Curing Conditions10.3390/ma8085261 ↗
11. Ultra-high performance concrete and fiber reinforced concrete: Achieving strength and ductility without heat curing10.1617/s11527-011-9767-0 ↗
12. Tensile fracture properties of an Ultra High Performance Fiber Reinforced Concrete (UHPFRC) with steel fiber10.1016/j.compstruct.2009.06.012 ↗
13. Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages10.1016/j.conbuildmat.2014.11.017 ↗
14. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete10.1016/j.conbuildmat.2015.11.028 ↗
15. The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete10.1016/j.conbuildmat.2010.11.057 ↗
16. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)10.1016/j.cemconres.2013.11.002 ↗
17. Chinese National Standard (2007). Common Portland Cement, Chinese National Standard. GB175-2007.
18. Chinese National Standard (2007). Silica Fume from Electric-furnace, Chinese National Standard. GB/T 21236-2007.
19. Chinese National Standard (2005). Test Method for Fluidity of Cement Mortar, Chinese National Standard. GB/T 2419–2005.
20. British Standard (2009). Testing Fresh Concrete, British Standard. EN 12350–7:2009.
21. Chinese National Standard (1999). Method of Testing Cements-Determination of Strength, Chinese National Standard. GB/T 17671-1999.
22. Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer10.1016/S0008-8846(99)00230-6 ↗
23. Vacuum mixing technology to improve the mechanical properties of ultra-high performance concrete10.1617/s11527-014-0416-2 ↗
24. Properties of Fiber Reinforced Concrete: Workability, Behavior under Long-Term Loading, and Air-Void Characteristics
25. Effect of fiber type and content on bleeding of steel fiber reinforced concrete10.1016/j.conbuildmat.2010.07.008 ↗
26. Rheological properties and the air content in fresh concrete for self compacting high performance concrete10.1016/j.conbuildmat.2015.07.051 ↗
27. Mehta, P.K., and Monteiro, P.J.M. (2006). Concrete: Microstructure, Properties, and Materials, McGraw-Hill. [3rd ed.].
28. Air-void structure, strength, and permeability of wet-mix shotcrete before and after shotcreting operation: The influences of silica fume and air-entraining agent10.1016/j.cemconcomp.2016.03.012 ↗