Show source-provided references
1. Meng, J., Cao, P., Huang, J., Lin, H., Chen, Y., and Cao, R. (2019). Second-order cone pro- gramming formulation of discontinuous deformation analysis. Int. J. Numer. Methods Eng.
10.1002/nme.6006 ↗2. Lin, H., Wang, H., Fan, X., Cao, P., and Zhou, K. (2018). Particle size distribution effects on deformation properties of graded aggregate base under cyclic loading. Eur. J. Environ. Civ. Eng.
10.1080/19648189.2016.1276480 ↗3. Wang, D., Wang, H., and Di, S. (2019). Mechanical properties and microstructure of magnesia-fly ash pastes. Road Mater. Pavement Des.
10.1080/14680629.2018.1439400 ↗4. Chen, Y.F., and Lin, H. (2018). Consistency analysis of Hoek-Brown and equivalent Mohr-coulomb parameters in calculating slope safety factor. Bull. Eng. Geol. Environ., 1–3.
10.1007/s10064-018-1418-z ↗6. Crack Initiation, Propagation, and Failure Characteristics of Jointed Rock or Rock-Like Specimens: A Review
9. Effects of air volume ratio parameters on air curtain dust suppression in a rock tunnel’s fully-mechanized working face
10.1016/j.apt.2017.11.007 ↗10. Research on tunnel ventilation systems: Dust diffusion and pollution behaviour by air curtains based on CFD technology and field measurement
10.1016/j.buildenv.2018.08.061 ↗11. Effects of spraying pressure and installation angle of nozzles on atomization characteristics of external spraying system at a fully-mechanized mining face
10.1016/j.powtec.2018.11.042 ↗12. Effect of air flowrate on pollutant dispersion pattern of coal dust particles at fully mechanized mining face based on numerical simulation
10.1016/j.fuel.2018.11.030 ↗13. Bao, Q., Nie, W., Liu, C., Liu, Y., Zhang, H., Wang, H., and Jin, H. (2019). Preparation and Characterization of a Binary-Graft-Based, Water-Absorbing Dust Suppressant for Coal Transportation. J. Appl. Polym. Sci., 136.
10.1002/app.47065 ↗14. Jin, H., Nie, W., Zhang, H., Liu, Y., Bao, Q., Wang, H., and Huang, D. (2019). Preparationand characterization of a novel environmentally friendly coal dust suppressant. J. Appl. Polym. Sci., 136.
10.1002/app.47354 ↗15. Development of a novel wind-assisted centralized spraying dedusting device for dust suppression in a fully mechanized mining face
10.1007/s11356-018-3264-8 ↗17. Zhang, C.Y., Pu, C.Z., Cao, R.H., Jiang, T.T., and Huang, G. (2019). The stability and roof-support optimization of roadways passing through unfavorable geological bodies using advanced detection and monitoring methods, among others, in the Sanmenxia Bauxite Mine in China’s Henan Province. Bull. Eng. Geol. Environ., 1–13.
10.1007/s10064-018-01439-1 ↗18. Wang, Y.X., Shan, S.B., Zhang, C.S., and Guo, P.P. (2019). Seismic response of tunnel lining structure in a thick expansive soil stratum. Tunn. Undergr. Space Technol., in press.
10.1016/j.tust.2019.03.016 ↗19. Failure characteristics of intermittent fissures under a compressive-shear test: Experimental and numerical analyses
10.1016/j.tafmec.2017.11.002 ↗21. Wu, F., Chen, J., and Zou, Q.L. (2018). A nonlinear creep damage model for salt rock. Int. J. Damage Mech.
10.1177/1056789518792649 ↗22. Internal stress distribution and cracking around flaws and openings of rock block under uniaxial compression: A particle mechanics approach
10.1016/j.compgeo.2018.06.002 ↗24. Wang, Y.X., Guo, P.P., Lin, H., Li, X., Zhao, Y.L., Yuan, B.X., Liu, Y., and Cao, P. (2019). Numerical Analysis of Fiber-Reinforced Soils based on the Equivalent Additional Stress Concept. Int. J. Geomech., in press.
10.1061/(ASCE)GM.1943-5622.0001504 ↗25. Wang, Y.X., Lin, H., Zhao, Y.L., Li, X., Guo, P.P., and Liu, Y. (2019). Analysis of fracturing characteristics of unconfined rock plate under edge on impact loading. Eur. J. Environ. Civ. Eng.
10.1080/19648189.2018.1509021 ↗27. Chen, R., Huang, J.W., Chen, Z.K., Xu, Y., Liu, J., and Ge, Y.H. (2019). Effect of root density of wheat and okra on hydraulic properties of an unsaturated compacted loam. Eur. J. Soil Sci.
10.1111/ejss.12766 ↗31. Wang, Y., Guo, P., Dai, F., Li, X., Zhao, Y., and Liu, Y. (2018). Behavior and modeling of fiber-reinforced clay under triaxial compression by combining the superposition method with the energy-based homogenization technique. Int. J. Geomech., 18.
10.1061/(ASCE)GM.1943-5622.0001313 ↗33. Wang, D., Du, Y., and Xiao, J. (2019). Shear properties of stabilized loess using novel reactive magnesia-bearing binders. J. Mater. Civ. Eng., 31.
10.1061/(ASCE)MT.1943-5533.0002662 ↗34. Zhao, Y.L., Tang, J.Z., Chen, Y., Zhang, L.Y., Wang, W.J., and Liao, J.P. (2017). Hydromechanical coupling tests for mechanical and permeability characteristics of fractured limestone in complete stress–strain process. Environ. Earth Sci., 76.
10.1007/s12665-016-6322-x ↗36. Wang, Y.-X., Guo, P.-P., Ren, W.-X., Yuan, B.-X., Yuan, H.-P., Zhao, Y.-L., Shan, S.-B., and Cao, P. (2017). Laboratory investigation on strength characteristics of expansive soil treated with jute fiber reinforcement. Int. J. Geomech., 17.
10.1061/(ASCE)GM.1943-5622.0000998 ↗37. Numerical analysis of karst water inrush and a criterion for establishing the width of water-resistant rock pillars
10.1007/s10230-017-0438-4 ↗42. Wang, D., Zentar, R., and Abriak, N.E. (2018). Durability and swelling of solidified/stabilized dredged marine soils with class F fly ash, cement and lime. J. Mater. Civ. Eng., 30.
10.1061/(ASCE)MT.1943-5533.0002187 ↗43. Long-term mechanical performance of marine sediments solidified with cement, lime and fly ash
45. Lu, M.M., Li, D.X., Jing, H.W., and Deng, Y.B. (2019). Analytical solution for consolidation of band-shaped drain based on an equivalent annular drain. Int. J. Geomech.
10.1061/(ASCE)GM.1943-5622.0001423 ↗47. Yuan, B., Sun, M., Wang, Y., Zhai, L., Luo, Q., and Zhang, X. (2019). A full 3D displacement measuring system for 3D displacement field of soil around a laterally loaded pile in transparent soil. Int. J. Geomech., 19.
10.1061/(ASCE)GM.1943-5622.0001409 ↗48. Numerical analysis of the compressive and shear failure behavior of rock containing multi-intermittent joints
10.1016/j.crme.2018.11.001 ↗50. Anggraini, V., Asadi, A., Farzadnia, N., Jahangirian, H., and Huat, B.B.K. (2016). Reinforcement benefits of nanomodified coir fiber in lime-treated marine clay. J. Mater. Civ. Eng., 28.
10.1061/(ASCE)MT.1943-5533.0001516 ↗51. Kumar, A., Walia, B.S., and Bajaj, A. (2007). Influence of fly ash, lime, and polyester fibers on compaction and strength properties of expansive soil. J. Mater. Civ. Eng., 19.
10.1061/(ASCE)0899-1561(2007)19:3(242) ↗54. Yuan, B., Xu, K., Wang, Y., Chen, R., and Luo, Q. (2017). Investigation of deflection of a laterally loaded pile and soil deformation using the PIV technique. Int. J. Geomech., 17.
10.1061/(ASCE)GM.1943-5622.0000842 ↗56. Analytical models for consolidation of combined composite ground improved by impervious columns and vertical drains
10.1002/nag.2770 ↗59. Wang, D., Wang, H., and Jiang, Y. (2019). Water immersion-induced strength performance of solidified soils with reactive MgO—A green and low carbon binder. J. Test. Eval.
10.1520/JTE20170098 ↗61. A new analytical model for consolidation with multiple vertical drains
10.1002/nag.2508 ↗62. Lu, M.M., Jing, H.W., Zhou, Y., and Xie, K.H. (2017). General analytical model for consolidation of stone columns-reinforced ground and combined composite ground. Int. J. Geomech., 17.
10.1061/(ASCE)GM.1943-5622.0000836 ↗63. ASTM (2015). Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils, ASTM International.