Accumulative Roll Bonding—A Review
Source abstract
Abstract
Different manufacturing processes can be utilized to fabricate light-weight high-strength materials for their applications in a wide spectrum of industries such as aerospace, automotive and biomedical sectors among which accumulative roll bonding (ARB) is a promising severe plastic deformation (SPD) method capable of creating ultrafine grains (UFG) in the final microstructure. The present review discusses recent advancements in the ARB process starting with the ARB basics, intricacies of the underlying mechanisms and physics, different materials, surface and rolling parameters, and finally its key effects on different properties such as strength, ductility, fatigue, toughness, superplasticity, tribology and thermal characteristics. Moreover, results of recent computational investigations have also been briefed towards the end. It is believed that ARB processing is an emerging area with tremendous opportunities in the industrial sector and ample potential in tailoring microstructures for high-performance materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Industrial Engineering Department, University of Science and Technology of Mazandaran, Behshahr, Mazandaran 4851878195, Iran
Mechanical Engineering Department, Isfahan University of Technology, Isfahan 84156-83111, Iran
Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore
References (100+)
Show source-provided references
1. Materials processing by simple shear10.1016/0921-5093(95)09705-8 ↗
2. Formation of submicrometre-Grained structure in magnesium alloy due to high plastic strains10.1007/BF00721611 ↗
3. Fatigue crack growth resistance of 7075 Al alloy after equal channel angular pressing10.1111/ffe.12472 ↗
4. Improvement of mechanical properties for Al alloys using equal-Channel angular pressing10.1016/S0924-0136(01)00783-X ↗
5. Principles of equal-Channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
6. Influence of aging on mechanical properties of equal channel angular pressed aluminum alloy 707510.1177/0954405415612370 ↗
7. Using high-Pressure torsion for metal processing: Fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
8. Microstructure and mechanical properties of super-Strong nanocrystalline tungsten processed by high-pressure torsion10.1016/j.actamat.2006.05.005 ↗
9. Microstructure and mechanical properties of pure Cu processed by high-pressure torsion10.1016/j.msea.2008.06.039 ↗
10. Ultra-Fine grained bulk steel produced by accumulative roll-Bonding (ARB) process10.1016/S1359-6462(99)00015-9 ↗
11. Influence of heat treatment on interface of Cu/Al bimetal composite fabricated by cold rolling10.1016/j.compositesb.2011.04.045 ↗
12. Novel manufacturing process of closed-Cell aluminum foam by accumulative roll-Bonding10.1016/j.scriptamat.2003.10.035 ↗
13. Novel manufacturing process of nanoparticle/Al composite filler metals of tungsten inert gas welding by accumulative roll bonding10.1016/j.msea.2015.09.053 ↗
14. Fabrication and properties of ZrO2/AZ31 nanocomposite fillers of gas tungsten arc welding by accumulative roll bonding10.1016/j.acme.2016.02.005 ↗
15. Cladding of low-Carbon steel to austenitic stainless steel by hot-Roll bonding: Microstructure and mechanical properties before and after welding10.1016/j.msea.2015.12.088 ↗
16. Cold welding. Part 1: Characteristics, bonding mechanisms, bond strength
17. Progress in cold roll bonding of metals10.1088/1468-6996/9/2/023001 ↗
18. Using cold roll bonding and annealing to process Ti/Al multi-Layered composites from elemental foils10.1016/j.msea.2004.01.021 ↗
19. Mechanical behavior and microstructural evolution upon annealing of the accumulative roll-bonding (ARB) processed Al alloy 110010.1016/j.msea.2007.07.022 ↗
20. Al/Ni metal intermetallic composite produced by accumulative roll bonding and reaction annealing10.1016/j.jallcom.2011.07.103 ↗
21. Change in microstructure and texture during annealing of pure copper heavily deformed by accumulative roll bonding10.2320/matertrans.MA200701 ↗
22. An investigation into the mechanical behavior and microstructural evolution of the accumulative roll bonded AZ31 Mg alloy upon annealing10.1016/j.matdes.2011.01.038 ↗
23. Manufacturing Al/steel multilayered composite by accumulative roll bonding and the effects of subsequent annealing on the microstructural and mechanical characteristics10.1016/j.msea.2013.10.026 ↗
24. Microstructure evolution upon annealing of accumulative roll bonding (ARB) 1100 Al sheet materials: Evolution of interface microstructures
25. Formability of ultrafine-Grained interstitial-Free steel fabricated by accumulative roll-Bonding and subsequent annealing10.1016/j.scriptamat.2011.02.002 ↗
26. Parks, J.M. (1953). Recrystallization welding. Weld. J., 209–222.
27. The phenomenon of seizure and its investigation10.1016/0043-1648(61)90236-8 ↗
28. Pressure welding by rolling
29. Mechanism of solid state pressure welding
30. Cold roll bonding of bimetallic sheets and strips10.1179/mst.1989.5.9.934 ↗
31. Morphology of the Interface of Roll-Bonded Aluminum
32. Effect of friction, annealing conditions and hardness on the bond strength of Al/Al strips produced by cold roll bonding process10.1016/j.matdes.2010.04.022 ↗
33. Solid-State bonding of iron-Based alloys, steel–Brass, and aluminum alloys10.1016/S0924-0136(97)00323-3 ↗
34. Cold welding. Part 3: Influence surface preparation on bond strength
35. Manufacturing of high-Strength aluminum/alumina composite by accumulative roll bonding10.1016/j.msea.2010.03.070 ↗
36. The effects of oxide film and annealing treatment on the bond strength of Al–Cu strips in cold roll bonding process10.1016/j.matdes.2013.06.028 ↗
37. Vaidyanath, L. Significance of surface preparation in cold pressure welding
38. The role of surface preparation parameters on cold roll bonding of aluminum strips10.1007/s11665-010-9664-7 ↗
39. A study on the effects of surface roughness on the strength of single lap joints10.1163/156856101743346 ↗
40. Effect of wire brushing on warm roll bonding of 6XXX/5XXX/6XXX aluminum alloy clad sheets10.1016/j.matdes.2011.09.024 ↗
41. Pressure welding by rolling at elevated temperatures
42. Influence of processing parameters on the bond toughness of roll-Bonded aluminium strip10.1016/j.scriptamat.2008.01.022 ↗
43. Bonding behavior during cold roll-Cladding of tri-Layered Al/brass/Al composite10.1016/j.jmapro.2016.08.008 ↗
44. Bond strength optimization of Ti/Cu/Ti clad composites produced by roll-Bonding10.1016/j.matdes.2015.05.010 ↗
45. Microstructure and mechanical properties of Al/Ti/Al laminated composites prepared by roll bonding10.1016/j.msea.2015.03.086 ↗
46. Improving mechanical properties of Mg-Al-Zn alloy sheets through accumulative roll-Bonding10.1016/S1003-6326(08)60054-0 ↗
47. Mechanical properties and interface evaluation of Al/AZ31 multilayer composites produced by ARB at different rolling temperatures10.1007/s11665-018-3423-6 ↗
48. Microstructural evolution and mechanical properties of the AA8011 alloy during the accumulative roll-Bonding process10.1007/s11661-002-0074-9 ↗
49. Development of a recovered/recrystallized multilayered microstructure in Al alloys by accumulative roll bonding10.1016/j.actamat.2007.06.021 ↗
50. Effect of Roll-Bonding and Subsequent Annealing on Microstructure Evolution of Accumulative Roll Bonded Pure Copper10.2320/matertrans.MH201506 ↗
51. Tensile behavior of commercially pure copper sheet fabricated by 2-And 3-Layered accumulative roll bonding (ARB) process10.3365/met.mat.2008.04.171 ↗
52. Microstructures and mechanical properties of ultra low carbon interstitial free steel severely deformed by a multi-Stack accumulative roll bonding process10.2320/matertrans.45.2177 ↗
53. Fabrication of Al/SiCP composite strips by repeated roll-Bonding (RRB) process10.1016/j.jallcom.2008.10.151 ↗
54. Bonding behavior of Al–Al2O3 laminations during roll bonding process10.1016/j.matdes.2011.08.048 ↗
55. High-Strength and highly-Uniform composite produced by anodizing and accumulative roll bonding processes10.1016/j.matdes.2010.04.048 ↗
56. Evaluation of mechanical properties of 1060-Al reinforced with WC particles via warm accumulative roll bonding process10.1016/j.matdes.2012.07.019 ↗
57. An alternative method for manufacturing high-Strength CP Ti–SiC composites by accumulative roll bonding process10.1016/j.matdes.2014.03.040 ↗
58. Effect of W particles on the properties of accumulatively roll-Bonded Al/W composites10.1016/j.msea.2012.03.095 ↗
59. Evaluation of microstructure and mechanical properties of Al/Al2O3/SiC hybrid composite fabricated by accumulative roll bonding process10.1016/j.matdes.2013.06.064 ↗
60. Comparison of microparticles and nanoparticles effects on the microstructure and mechanical properties of steel-Based composite and nanocomposite fabricated via accumulative roll bonding process10.1016/j.matdes.2013.11.049 ↗
61. Thermal stability of an ultrafine grain β-Ti alloy10.1016/j.msea.2012.07.030 ↗
62. Annealing behaviour and mechanical properties of severely deformed interstitial free steel10.1016/j.msea.2011.10.007 ↗
63. Precipitation phenomena, thermal stability and grain growth kinetics in an ultra-Fine grained Al 2014 alloy after annealing treatment10.1016/j.jallcom.2015.07.098 ↗
64. The effect of annealing on the formability of aluminum 1200 after accumulative roll bonding10.1016/j.jmapro.2017.09.013 ↗
65. Effects of ARB and ageing processes on mechanical properties and microstructure of 6061 aluminum alloy10.1016/j.jmatprotec.2011.01.023 ↗
66. Softening behavior of 8011 alloy produced by accumulative roll bonding process10.1016/S1359-6462(01)01069-7 ↗
67. Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-Bonding10.1016/S0921-5093(01)01416-2 ↗
68. Production of nano-Grained structure in 6061 aluminum alloy strip by accumulative roll bonding10.1016/j.msea.2011.09.057 ↗
69. Microstructure evolution and mechanical properties of AA1100 aluminum sheet processed by accumulative roll bonding10.1016/j.msea.2008.06.025 ↗
70. On the use of accumulative roll bonding process to develop nanostructured aluminum alloy 508310.1016/j.msea.2012.11.010 ↗
71. Investigation of ultrafine grained AA1050 fabricated by accumulative roll bonding10.1016/j.msea.2014.07.032 ↗
72. Preparation of Fine-Grained and High-Strength Mg–8Li–3Al–1Zn Alloy by Accumulative Roll Bonding10.1002/adem.201500211 ↗
73. Formation of nano-Sized grains in Cu and Cu− Fe− P alloys by accumulative roll bonding process10.1007/BF03027535 ↗
74. Nano-Grained copper strip produced by accumulative roll bonding process10.1016/j.msea.2007.03.065 ↗
75. Mechanical properties of ultrafine grained 5052 Al alloy produced by accumulative roll-Bonding and cryogenic rolling10.1007/BF03027516 ↗
76. Influence of cross-Rolling on the mechanical properties of an accumulative roll bonded aluminum alloy AA601410.1016/j.msea.2013.12.075 ↗
77. Microstructural and mechanical properties of nano/ultra-Fine structured 7075 aluminum alloy by accumulative roll-Bonding process10.1016/j.mspro.2015.11.020 ↗
78. Nano/ultrafine grained AA2024 alloy processed by accumulative roll bonding: A study of microstructure, deformation texture and mechanical properties10.1016/j.jallcom.2017.04.117 ↗
79. Microstructure and mechanical properties of commercial purity titanium severely deformed by ARB process10.1007/s10853-006-0909-7 ↗
80. An Investigation of mechanical properties in accumulative roll bonded nano-Grained pure titanium10.1016/j.msea.2017.02.013 ↗
81. Strengthening mechanisms of nano-Grained commercial pure titanium processed by accumulative roll bonding10.1016/j.msea.2017.03.070 ↗
82. A new strategy to simultaneous increase in the strength and ductility of AA2024 alloy via accumulative roll bonding (ARB)10.1016/j.msea.2016.01.020 ↗
83. Processing sheet materials by accumulative roll bonding and reaction annealing from Ti/Al/Nb elemental foils10.1016/j.msea.2006.06.144 ↗
84. Investigation of structure and mechanical properties of multi-Layered Al/Cu composite produced by accumulative roll bonding (ARB) process10.1016/j.compscitech.2008.02.029 ↗
85. Microstructure and mechanical properties of ultra-Fine grains (UFGs) aluminum strips produced by ARB process10.1016/j.jallcom.2008.06.161 ↗
86. Asymmetric accumulative roll bonding of aluminium–Titanium composite sheets10.1016/j.msea.2013.04.027 ↗
87. Microstructures and mechanical properties of Al/Zn composites prepared by accumulative roll bonding and heat treatment10.1016/j.msea.2013.05.038 ↗
88. Evaluation of mechanical properties and structure of multilayered Al/Ni composites produced by accumulative roll bonding (ARB) process10.1016/j.jallcom.2009.09.022 ↗
89. Study on the microstructure and mechanical properties of multilayer Cu/Ni composite processed by accumulative roll bonding10.1016/j.msea.2012.09.021 ↗
90. Ultrafine grained AA1050/AA6061 composite produced by accumulative roll bonding10.1016/j.msea.2012.08.109 ↗
91. Cu/Zr nanoscaled multi-stacks fabricated by accumulative roll bonding10.1016/j.jallcom.2010.02.201 ↗
92. Investigation on microstructure and mechanical properties of Al–Zn composite during accumulative roll bonding (ARB) process10.1016/j.msea.2011.09.040 ↗
93. Fabrication of nanostructured Al/Cu/Mn metallic multilayer composites by accumulative roll bonding process and investigation of their mechanical properties10.1016/j.matdes.2013.11.067 ↗
94. Microstructure evolution and mechanical properties of Cu/Zn multilayer processed by accumulative roll bonding (ARB)10.1016/j.msea.2013.11.026 ↗
95. Microstructure and mechanical properties of the Mg/Al multilayer fabricated by accumulative roll bonding (ARB) at ambient temperature10.1016/j.msea.2012.02.083 ↗
96. Ultrafine equiaxed-Grain Ti/Al composite produced by accumulative roll bonding10.1016/j.scriptamat.2009.11.036 ↗
97. Fabrication of Al/Cup composite by accumulative roll bonding process and investigation of mechanical properties10.1016/j.msea.2012.08.008 ↗
98. Significant enhancement of bond strength in the accumulative roll bonding process using nano-Sized SiO2 particles10.1016/j.jmatprotec.2009.01.003 ↗
99. Refinement of microstructure and improvement of mechanical properties of Al/Al2O3 cast composite by accumulative roll bonding process10.1016/j.msea.2010.12.049 ↗
100. Application of compocasting and cross accumulative roll bonding processes for manufacturing high-Strength, highly uniform and ultra-Fine structured Al/SiCp nanocomposite10.1016/j.msea.2013.11.006 ↗