journal article·2019-06-18Open access

A Review on the Thermal Hazards of the Lithium-Ion Battery and the Corresponding Countermeasures

Dongxu Ouyang, Mingyi Chen, Que Huang, Jingwen Weng, Zhi Wang, Jian Wang

Applied Sciences· Volume 9· Issue 12

Abstract

As one of the most promising new energy sources, the lithium-ion battery (LIB) and its associated safety concerns have attracted great research interest. Herein, a comprehensive review on the thermal hazards of LIBs and the corresponding countermeasures is provided. In general, the thermal hazards of the LIB can be caused or aggravated by several factors including physical, electrical and thermal factors, manufacturing defect and even battery aging. Due to the activity and combustibility of traditional battery components, they usually possess a relatively high thermal hazard and a series of side reactions between electrodes and electrolytes may occur under abusive conditions, which would further lead to the thermal failure of LIBs. Besides, the thermal hazards generally manifest as the thermal runaway behaviors such as high-temperature, ejection, combustion, explosion and toxic gases for a single battery, and it can even evolve to thermal failure propagation within a battery pack. To decrease these hazards, some countermeasures are reviewed including the application of safety devices, fire-retardant additives, battery management systems, hazard warnings and firefighting should a hazard occur.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei 230026, China

School of Environment and Safety Engineering, Jiangsu University, Zhenjiang 212013, China

School of Environment and Safety Engineering, North University of China, Taiyuan 030051, China

References (100+)

Show source-provided references
1. Solar energy for future world: A review10.1016/j.rser.2016.05.022 ↗
2. Research opportunities to advance solar energy utilization10.1126/science.aad1920 ↗
3. A review of combined wave and offshore wind energy10.1016/j.rser.2014.09.032 ↗
4. Resource assessment for future generations of tidal-stream energy arrays10.1016/j.energy.2015.02.038 ↗
5. Fuel cells for portable applications10.1016/S0378-7753(01)01069-2 ↗
6. Potential use of geothermal energy sources for the production of lithium-ion batteries10.1016/j.renene.2012.04.028 ↗
7. Measurements of ageing and thermal conductivity in a secondary NMC-hard carbon Li-ion battery and the impact on internal temperature profiles10.1016/j.electacta.2017.07.173 ↗
8. Effects of overdischarge on performance and thermal stability of a Li-ion cell10.1016/j.jpowsour.2006.03.043 ↗
9. A general discussion of Li ion battery safety
10. Failure mechanism of Li-ion battery at overcharge conditions10.1007/s10008-007-0449-3 ↗
11. The current move of lithium ion batteries towards the next phase10.1002/aenm.201200028 ↗
12. A review of hazards associated with primary lithium and lithium-ion batteries10.1016/j.psep.2011.06.022 ↗
13. Thermal runaway mechanism of lithium ion battery for electric vehicles: A review10.1016/j.ensm.2017.05.013 ↗
14. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
15. The reactivity of charged positive Li1-n[NixMnyCoz]O2 electrodes with electrolyte at elevated temperatures using accelerating rate calorimetry10.1016/j.jpowsour.2018.04.036 ↗
16. A systematic study on the reactivity of different grades of charged Li [NixMnyCoz]O2 with electrolyte at elevated temperatures using accelerating rate calorimetry10.1016/j.jpowsour.2016.07.039 ↗
17. Temperature-sensitive cathode materials for safer lithium-ion batteries10.1039/c0ee00590h ↗
18. Safe positive temperature coefficient composite cathode for lithium ion battery10.1016/j.jpowsour.2012.05.015 ↗
19. A major constituent of brown algae for use in high-capacity Li-ion batteries10.1126/science.1209150 ↗
20. Mussel-inspired adhesive binders for high-performance silicon nanoparticle anodes in lithium-ion batteries10.1002/adma.201203981 ↗
21. Stable cycling of double-walled silicon nanotube battery anodes through solid–electrolyte interphase control10.1038/nnano.2012.35 ↗
22. Electronegativity-induced enhancement of thermal stability by succinonitrile as an additive for Li ion batteries10.1039/c1ee01272j ↗
23. The effect of some nitriles as electrolyte additives in Li-ion batteries10.1149/2.0651503jes ↗
24. An investigation of functionalized electrolyte using succinonitrile additive for high voltage lithium-ion batteries10.1016/j.jpowsour.2015.10.105 ↗
25. Composite of a nonwoven fabric with poly (vinylidene fluoride) as a gel membrane of high safety for lithium ion battery10.1039/C2EE23564A ↗
26. Renewable and superior thermal-resistant cellulose-based composite nonwoven as lithium-ion battery separator10.1021/am302290n ↗
27. Mussel-and diatom-inspired silica coating on separators yields improved power and safety in Li-ion batteries10.1021/cm301967f ↗
28. Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling10.1016/j.apenergy.2016.05.122 ↗
29. Investigation of power battery thermal management by using mini-channel cold plate10.1016/j.enconman.2014.10.015 ↗
30. Water cooling based strategy for lithium ion battery pack dynamic cycling for thermal management system10.1016/j.applthermaleng.2017.12.131 ↗
31. Thermal management of cylindrical power battery module for extending the life of new energy electric vehicles10.1016/j.applthermaleng.2015.04.012 ↗
32. Experimental study of a passive thermal management system for three types of battery using copper foam saturated with phase change materials10.1039/C7RA03963H ↗
33. Novel thermal management system using boiling cooling for high-powered lithium-ion battery packs for hybrid electric vehicles10.1016/j.jpowsour.2017.07.067 ↗
34. In situ monitoring of temperature inside lithium-ion batteries by flexible micro temperature sensors10.3390/s111009942 ↗
35. Synthesis of hematite (α-Fe2O3) nanorods: Diameter-size and shape effects on their applications in magnetism, lithium ion battery, and gas sensors10.1021/jp0633906 ↗
36. In-situ temperature measurement in lithium ion battery by transferable flexible thin film thermocouples10.1016/j.jpowsour.2014.03.004 ↗
37. α-Fe2O3 nanotubes in gas sensor and lithium-ion battery applications10.1002/adma.200401101 ↗
38. Lithium Battery Safety: A look at Woods Hole Oceanographic Institution’s Program
39. Experimental study on the efficiency of dodecafluoro-2-methylpentan-3-one on suppressing lithium-ion battery fires10.1039/C8RA08908F ↗
40. Lessons learned from the 787 dreamliner issue on lithium-ion battery reliability10.3390/en6094682 ↗
41. Kolly, J.M., Panagiotou, J., and Czech, B.A. (2013). The Investigation of a Lithium-Ion Battery Fire Onboard a Boeing 787 by the US National Transportation Safety Board, Safety Research Corporation of America.
42. Goto, N. (2014). Aircraft Serious Incident Investigation Report: All Nippon Airways Co. Ltd. JA804A, Japan Transport Safety Board. Report No. AI2014-4.
43. (2014). Aircraft Incident Report: Auxiliary Power Unit Battery Fire, Japan Airlines Boeing 787, JA 829 J, Boston, Massachusetts, January 7, 2013, Report No. PB2014-108867.
44. Diagnostic examination of thermally abused high-power lithium-ion cells10.1016/j.jpowsour.2006.04.088 ↗
45. Karter, M.J. (2014). Fire Loss in the United States During 2013, National Fire Protection Association.
46. (2017, January 23). The Samsung Note7 Exploded. Available online: http://www.sohu.com/a/125020048_467791/.
47. (2016, October 11). Is the Heart of the Distortion or Moral Bankruptcy?. Available online: https://www.caishimv.com/party/1476152753.html/.
48. (2016, October 16). Huawei P9 Plus Exploded and the Attitude Was Worse than Samsung Note7. Available online: http://www.sohu.com/a/116273061_162764/.
49. (2016, October 21). An iPhone 7 Took Fire and Burned a Car in Australia. Available online: http://news.mydrivers.com/1/504/504106.htm/.
50. (2018, January 11). Too Scary! Suddenly, the iPhone Battery Exploded and Seven People Were Hospitalized. Available online: https://baijiahao.baidu.com/s?id=1589274155032747498&wfr=spider&for=pc/.
51. (2018, December 30). An iPhone XS Max Caught Fire for the First Time and the Users Said They Might Sue Apple. Available online: http://www.sohu.com/a/285734633_499322/.
52. (2017, January 04). A Summary Analysis on the 35 Fire Accidents of New Energy Vehicles in 2016. Available online: http://www.sohu.com/a/123335110_526255/.
53. (2017, June 10). Electric Vehicle Fire Accident Inventory in the First Half of 2017. Available online: https://www.sohu.com/a/155869592_118021/.
54. (2018, June 08). Electric Vehicle Fire Accident Inventory in the First Half of 2018. Available online: http://www.evpartner.com/news/8/detail-36915.html/.
55. (2018, September 10). Flight UPS6 Crashed in Dubai on 3 September 2010. Available online: http://m.yzwb.net/a/180910225943473.html/.
56. (2013, May 22). The Boeing 787’s Lithium Battery Troubles. Available online: http://www.360doc.com/content/13/0522/10/7536781_287205631.shtml/.
57. (2017, July 31). Why Lithium Batteries Are ‘Frowned Upon’ by Aircraft?. Available online: http://www.fx361.com/page/2017/0731/2112773.shtml/.
58. A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions10.1166/mex.2012.1075 ↗
59. Energetics of lithium ion battery failure10.1016/j.jhazmat.2016.06.047 ↗
60. Comprehensive calorimetry of the thermally-induced failure of a lithium ion battery10.1016/j.jpowsour.2015.01.125 ↗
61. Experimental study on the thermal behaviors of lithium-ion batteries under discharge and overcharge conditions10.1007/s10973-017-6888-x ↗
62. Fire behavior of lithium-ion battery with different states of charge induced by high incident heat fluxes10.1007/s10973-018-7899-y ↗
63. Diffusion induced stress in layered Li-ion battery electrode plates10.1016/j.jpowsour.2012.02.104 ↗
64. Conformal Surface Coatings to Enable High Volume Expansion Li-Ion Anode Materials10.1002/cphc.201000158 ↗
65. Utilizing van der Waals slippery interfaces to enhance the electrochemical stability of Silicon film anodes in lithium-ion batteries10.1021/acsami.8b00258 ↗
66. Wu, Y., Saxena, S., Xing, Y., Wang, Y., Li, C., Yung, W., and Pecht, M. (2018). Analysis of manufacturing-induced defects and structural deformations in Lithium-ion batteries using computed tomography. Energies, 11.10.3390/en11040925 ↗
67. (2017, August 20). Samsung Expands Recall to All Galaxy Note7 Devices. Available online: http://www.samsung.com/us/note7recall/.
68. Effect of electrode manufacturing defects on electrochemical performance of lithium-ion batteries: Cognizance of the battery failure sources10.1016/j.jpowsour.2016.02.007 ↗
69. The effects of defects on localized plating in lithium-ion batteries10.1149/2.1051507jes ↗
70. Study on degradation behavior of commercial 18650 LiAlNiCoO2 cells in over-charge conditions10.1002/er.4302 ↗
71. Low-temperature reversible capacity loss and aging mechanism in lithium-ion batteries for different discharge profiles10.1002/er.4257 ↗
72. Thermal stability of alkyl carbonate mixed-solvent electrolytes for lithium ion cells10.1016/S0378-7753(01)00960-0 ↗
73. The role of Li-ion battery electrolyte reactivity in performance decline and self-discharge10.1016/S0378-7753(03)00149-6 ↗
74. Comparison of the thermal and electrochemical properties of LiPF6 and LiN(SO2C2F5)2 salts in organic electrolytes10.1016/S0378-7753(03)00246-5 ↗
75. C80 Calorimeter Studies of the Thermal Behavior of LiPF 6 Solutions10.1007/s10953-006-9377-6 ↗
76. Investigation on the fire-induced hazards of Li-ion battery cells by fire calorimetry10.1039/C1EE02218K ↗
77. Cycling characteristics of secondary Li electrode in LiBF4/mixed ether electrolytes10.1149/1.2113743 ↗
78. A new approach toward improved low temperature performance of Li-ion battery10.1016/S1388-2481(02)00490-3 ↗
79. LiBOB: Is it an alternative salt for lithium ion chemistry?10.1016/j.jpowsour.2005.03.153 ↗
80. LiBOB and Its Derivatives: Weakly Coordinating Anions, and the Exceptional Conductivity of Their Nonaqueous Solutions10.1149/1.1344281 ↗
81. Densification and ionic-conduction improvement of lithium garnet solid electrolytes by flowing oxygen sintering10.1016/j.jpowsour.2013.09.140 ↗
82. Field assisted sintering of dense Al-substituted cubic phase Li7La3Zr2O12 solid electrolytes10.1016/j.jpowsour.2014.03.148 ↗
83. All-solid-state lithium secondary battery with ceramic/polymer composite electrolyte10.1016/S0167-2738(02)00366-1 ↗
84. Role of amorphous boundary layer in enhancing ionic conductivity of lithium–lanthanum–titanate electrolyte10.1016/j.electacta.2010.01.036 ↗
85. Studies of the effect of high voltage on the impedance and cycling performance of Li [Ni0.4Mn0.4Co0.2]O2/graphite lithium-ion pouch cells10.1149/2.0831506jes ↗
86. Kim, H., Oh, S.-M., Scrosati, B., and Sun, Y.-K. (2015). High-performance electrode materials for lithium-ion batteries for electric vehicles. Adv. Battery Technol. Electr. Veh., 191–241.10.1016/B978-1-78242-377-5.00009-1 ↗
87. Comparison of Single Crystal and Polycrystalline LiNi0.5Mn0.3Co0.2O2 Positive Electrode Materials for High Voltage Li-Ion Cells10.1149/2.0991707jes ↗
88. Differential scanning calorimetry material studies: Implications for the safety of lithium-ion cells10.1016/S0378-7753(97)02611-6 ↗
89. Effects of solvents and salt on the thermal stability of charged LiCoO210.1016/j.materresbull.2008.07.006 ↗
90. Thermal Behavior of Lithiated Graphite with Electrolyte in Lithium-Ion Batteries10.1149/1.2139955 ↗
91. Thermal stability of graphite anode with electrolyte in lithium-ion cells10.1016/S0167-2738(02)00060-7 ↗
92. Calorimetric studies of the thermal stability of electrolyte solutions based on alkyl carbonates and the effect of the contact with lithium10.1016/j.jpowsour.2005.03.177 ↗
93. Deformation mechanisms in crystalline polymers10.1007/BF00540553 ↗
94. A yolk-shell design for stabilized and scalable Li-ion battery alloy anodes10.1021/nl3014814 ↗
95. Properties and promises of nanosized insertion materials for Li-ion batteries10.1021/ar2001793 ↗
96. LiMn0.5Fe0.5PO4 solid solution materials synthesized by rheological phase reaction and their excellent electrochemical performances as cathode of lithium ion battery10.1016/j.jpowsour.2013.01.184 ↗
97. Electrochemical performance and thermal property of electrospun PPESK/PVDF/PPESK composite separator for lithium-ion battery10.1007/s10800-013-0561-2 ↗
98. Electrospun coaxial PPESK/PVDF fibrous membranes with thermal shutdown property used for lithium-ion batteries10.1016/j.matlet.2019.02.009 ↗
99. Preparation of thermally stable composite forward osmosis hollow fiber membranes based on copoly (phthalazinone biphenyl ether sulfone) substrates10.1016/j.ces.2017.03.026 ↗
100. Preparation and characterization of electrospun poly (phthalazinone ether nitrile ketone) membrane with novel thermally stable properties10.1016/j.apsusc.2015.05.124 ↗