Feature-size-dependent compressive deformation mechanisms of TiC coatings: an atomistic study

1. C.J.H. Wort, R.S. Balmer, Diamond as an electronic material. Mater. Today 11(1), 22–28 (2008). https://doi.org/10.1016/S1369-7021(07)70349-810.1016/S1369-7021(07)70349-8 ↗

2. Z. Cheng, T. Bougher, T.Y. Bai, S.Y. Wang, C. Li, L. Yates, B.M. Foley, M. Goorsky, B.A. Cola, F. Faili, S. Graham, Probing growth-induced anisotropic thermal transport in high-quality CVD diamond membranes by multifrequency and multiple-spot-size time-domain thermoreflectance. ACS Appl. Mater. Interfaces 10(5), 4808–4815 (2018). https://doi.org/10.1021/acsami.7b1681210.1021/acsami.7b16812 ↗

3. S.G. Dai, J.W. Li, N.X. Lu, Research progress of diamond/copper composites with high thermal conductivity. Diam. Relat. Mater. 108, 107993 (2020). https://doi.org/10.1016/j.diamond.2020.10799310.1016/j.diamond.2020.107993 ↗

4. L. Du, J. Yuan, N.K. Deng, Y.F. Qu, X.F. Zhang, W.B. Hu, Heat transfer properties of single crystal diamond zigzag double-layer microchannel heat sinks. Int. J. Therm. Sci. 196, 108687 (2024). https://doi.org/10.1016/j.ijthermalsci.2023.10868710.1016/j.ijthermalsci.2023.108687 ↗

5. Q.L. Wen, X.Y. Wei, X.P. Xu, J. Lu, C.C. Cui, Study on ultraviolet laser processing of a single-crystal diamond along <100> and <110> crystal orientations. Opt. Laser Technol. 149, 107907 (2022). https://doi.org/10.1016/j.optlastec.2022.10790710.1016/j.optlastec.2022.107907 ↗

6. H.T. Xu, Y.F. Li, L. Wang, C.Y. Lu, H.X. Li, W.J. Zheng, Y.H. Ma, Z.L. Gao, J.G. Yang, Y.M. He, Optimized AgCuSnTi filler alloy for brazing of diamond/copper combination used in microwave windows: microstructure and mechanical performance. Vacuum 212, 112024 (2023). https://doi.org/10.1016/j.vacuum.2023.11202410.1016/j.vacuum.2023.112024 ↗

7. B.J. Ma, F. Lian, Study on the use of CuSnTi brazing alloy for induction brazing of diamond grits surface-treated by direct current plasma chemical vapor deposition. Int. J. Refract. Met. Hard Mater. 41, 339–344 (2013). https://doi.org/10.1016/j.ijrmhm.2013.05.00610.1016/j.ijrmhm.2013.05.006 ↗

8. J.W. Peng, F.L. Zhang, Y.M. Zhou, L.K. Xiong, Y.J. Huang, H.Q. Tang, Fabrication of diamond/copper composite thin plate based on a single-layer close packed diamond particles network for heat dissipation. Chem. Eng. J. 476, 146666 (2023). https://doi.org/10.1016/j.cej.2023.14666610.1016/j.cej.2023.146666 ↗

9. V. Casalegno, M. Salvo, M. Ferraris, Surface modification of carbon/carbon composites to improve their wettability by copper. Carbon 50(6), 2296–2306 (2012). https://doi.org/10.1016/j.carbon.2012.01.04910.1016/j.carbon.2012.01.049 ↗

10. X.Y. Ding, Y.C. Fu, B. Li, S. Lin, L.M. Luo, Y.C. Wu, J.H. Yao, Microstructure and mechanical properties of Al2O3 dispersion strengthened Cu by laser in-situ aluminum thermal reduction processing. Mater. Des. , 114547 (2025). https://doi.org/10.1016/j.matdes.2025.11454710.1016/j.matdes.2025.114547 ↗

11. Y.G. Fan, K.N. Li, H.D. Li, C. Wang, Profiling interfacial reaction features between diamond and Cu-Sn-Ti active filler metal brazed at 1223 K. J. Mater. Sci. Technol. 131, 100–105 (2022). https://doi.org/10.1016/j.jmst.2022.05.03210.1016/j.jmst.2022.05.032 ↗

12. Y.V. Naidich, G.A. Kolesnichenko, Investigation of the wetting of diamond and graphite by molten metals and alloys. Powder Metall. Met. Ceram. 3(3), 191–195 (1965). https://doi.org/10.1007/BF0077394710.1007/BF00773947 ↗

13. S.Y. Wang, B. Xiao, H.Z. Xiao, X.L. Meng, Interface microstructure and bonding performance of brazed W-coated diamonds using Ni–Cr alloy. Ceram. Int. 48(7), 9864–9872 (2022). https://doi.org/10.1016/j.ceramint.2021.12.18910.1016/j.ceramint.2021.12.189 ↗

14. B. Li, J.R. Cheng, H.P. Wang, Q.F. Sun, L.J. Wu, S.W. Liu, P.P. Zhang, Z.X. Yu, X.L. Lu, S. Tofil, Q.L. Zhang, J.H. Yao, Improved inter-particle bonding of cold sprayed Ti6Al4V coatings by synchronously coupling with laser irradiation and in-situ shot peening during deposition process. Surf. Coat. Technol. 533, 133654 (2026). https://doi.org/10.1016/j.surfcoat.2026.13365410.1016/j.surfcoat.2026.133654 ↗

15. Z. Liu, X.J. Liao, W. Fu, D.K. Mu, X.P. Xu, H. Huang, Microstructures and bonding strength of synthetic diamond brazed by near-eutectic Ag–Cu–in–Ti filler alloy. Mater. Sci. Eng. A 790, 139711 (2020). https://doi.org/10.1016/j.msea.2020.13971110.1016/j.msea.2020.139711 ↗

16. X.J. Guo, X.Q. Si, C. Li, S.H. Zhao, Y.X. Liu, Z.Q. Wang, Z.J. He, X.Y. Wang, J. Cao, Active brazing of C/C composites and single crystal Ni-based superalloy: interfacial microstructure and formation mechanism. J. Alloys Compd. 886, 161183 (2021). https://doi.org/10.1016/j.jallcom.2021.16118310.1016/j.jallcom.2021.161183 ↗

17. M. Wu, C.Z. Cao, U.D. Rafi, X.B. He, X.H. Qu, Brazing diamond/Cu composite to alumina using reactive Ag-Cu-Ti alloy. Trans. Nonferrous Met. Soc. China 23(6), 1701–1708 (2013). https://doi.org/10.1016/S1003-6326(13)62651-510.1016/S1003-6326(13)62651-5 ↗

18. S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Microstructure, residual stresses and shear strength of diamond-steel-joints brazed with a Cu-Sn-based active filler alloy. Int. J. Refract. Met. Hard Mater. 30(1), 16–24 (2012). https://doi.org/10.1016/j.ijrmhm.2011.06.00610.1016/j.ijrmhm.2011.06.006 ↗

19. G. Rasool, S. Mridha, M.M. Stack, Mapping wear mechanisms of TiC/Ti composite coatings. Wear 328–329, 498–508 (2015). https://doi.org/10.1016/j.wear.2015.03.02210.1016/j.wear.2015.03.022 ↗

20. M. Zheng, D. Qu, X. Wei, Z. Zhang, Z. Zhu, L. Wang, W. Chen, Molecular dynamics study on the nanoscale repeated friction and wear mechanisms of TiC/Ni composites. Appl. Phys. A 128(4), 1–12 (2022). https://doi.org/10.1007/s00339-022-05414-210.1007/s00339-022-05414-2 ↗

21. W. Yang, L. Tang, Y. Liu, Y. Luo, L. Liu, P. Xu, D. Mao, Atomic erosion behavior and influence mechanism during erosion impact of TiC coatings with different crystal faces in oil production environment: a molecular dynamics simulation. Tribol. Int. 193, 109320 (2024). https://doi.org/10.1016/j.triboint.2024.10932010.1016/j.triboint.2024.109320 ↗

22. J.H. Zhou, W.J. Chen, X.S. Shi, C.Y. Lu, H.X. Li, W.J. Zheng, Y.H. Ma, Z.L. Gao, J.G. Yang, Y.M. He, Grain-size effects of TiC on mechanical properties in diamond/TiC combinations: a molecular dynamics exploration. Diam. Relat. Mater. 136, 110051 (2023). https://doi.org/10.1016/j.diamond.2023.11005110.1016/j.diamond.2023.110051 ↗

23. A.P. Thompson, H.M. Aktulga, R. Berger, D.S. Bolintineanu, W.M. Brown, P.S. Crozier, P.J. In T Veld, A. Kohlmeyer, S.G. Moore, T.D. Nguyen, R. Shan, M.J. Stevens, J. Tranchida, C. Trott, S.J. Plimpton, LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales. Comput. Phys. Commun. 271, 108171 (2022). https://doi.org/10.1016/j.cpc.2021.10817110.1016/j.cpc.2021.108171 ↗

24. Y.M. Kim, B.J. Lee, Modified embedded-atom method interatomic potentials for the Ti–C and Ti–N binary systems. Acta Mater. 56(14), 3481–3489 (2008). https://doi.org/10.1016/j.actamat.2008.03.02710.1016/j.actamat.2008.03.027 ↗

25. C.J. Han, R. Babicheva, J.D.Q. Chua, U. Ramamurty, S.B. Tor, C.N. Sun, K. Zhou, Microstructure and mechanical properties of (TiB+TiC)/Ti composites fabricated in situ via selective laser melting of Ti and B4C powders. Addit. Manuf. 36, 101466 (2020). https://doi.org/10.1016/j.addma.2020.10146610.1016/j.addma.2020.101466 ↗

26. Y.J. Yang, M.B. Liu, S.Q. Zhou, W.J. Ren, Q.H. Zhou, L. Shi, Breaking through the strength-ductility trade-off in graphene reinforced Ti6Al4V composites. J. Alloys Compd. 871, 159535 (2021). https://doi.org/10.1016/j.jallcom.2021.15953510.1016/j.jallcom.2021.159535 ↗

27. W. Yang, L. Tang, Y. Liu, Y. Luo, L. Liu, P. Xu, D. Mao, Atomic erosion behavior and influence mechanism during erosion impact of TiC coatings with different crystal faces in oil production environment: a molecular dynamics simulation. Tribol. Int. , 109320 (2024). https://doi.org/10.1016/j.triboint.2024.10932010.1016/j.triboint.2024.109320 ↗

28. C. Chung, M. Lee, M.Y. Tsai, C.H. Chu, S.J. Lin, High thermal conductive diamond/Cu–Ti composites fabricated by pressureless sintering technique. Appl. Therm. Eng. 69(1), 208–213 (2014). https://doi.org/10.1016/j.applthermaleng.2013.11.06510.1016/j.applthermaleng.2013.11.065 ↗

29. Q.C. Gu, Z.H. Han, L. Xu, S.K. Wei, Preparation of Ti-coated diamond/WC-Co-based cemented carbide composites by microwave-evaporation titanium-plating of diamond particles and microwave hot-press sintering. Ceram. Int. 49(6), 10139–10150 (2023). https://doi.org/10.1016/j.ceramint.2022.11.19710.1016/j.ceramint.2022.11.197 ↗

30. U.E. Klotz, C.L. Liu, F.A. Khalid, H. Elsener, Influence of brazing parameters and alloy composition on interface morphology of brazed diamond. Mater. Sci. Eng. A 495(1), 265–270 (2008). https://doi.org/10.1016/j.msea.2007.08.10110.1016/j.msea.2007.08.101 ↗

31. P. Hirel, Atomsk: a tool for manipulating and converting atomic data files. Comput. Phys. Commun. 197, 212–219 (2015). https://doi.org/10.1016/j.cpc.2015.07.01210.1016/j.cpc.2015.07.012 ↗

32. W. Yang, G. Ayoub, I. Salehinia, B. Mansoor, H. Zbib, Deformation mechanisms in Ti/TiN multilayer under compressive loading. Acta Mater. 122, 99–108 (2017). https://doi.org/10.1016/j.actamat.2016.09.03910.1016/j.actamat.2016.09.039 ↗

33. X.L. Li, T. Fu, C.Y. Li, H. Hu, X.H. Peng, Effect of coating thickness on mechanical properties of Cu/CoCrFeNi nanolaminates: implications from a quantitative flow stress model. J. Mater. Res. Technol. 28, 3485–3493 (2024). https://doi.org/10.1016/j.jmrt.2023.12.21810.1016/j.jmrt.2023.12.218 ↗

34. A. Stukowski, Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool. Model. Simul. Mater. Sci. Eng. 18(1), 015012 (2009). https://doi.org/10.1088/0965-0393/18/1/01501210.1088/0965-0393/18/1/015012 ↗

35. C.L. Kelchner, S.J. Plimpton, J.C. Hamilton, Dislocation nucleation and defect structure during surface indentation. Phys. Rev. B 58(17), 11085–11088 (1998). https://doi.org/10.1103/PhysRevB.58.1108510.1103/PhysRevB.58.11085 ↗

36. S. Goel, X.C. Luo, R.L. Reuben, Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process. Tribol. Int. 57, 272–281 (2013). https://doi.org/10.1016/j.triboint.2012.06.02710.1016/j.triboint.2012.06.027 ↗

37. Q.H. Fang, Y. Chen, J. Li, C. Jiang, B. Liu, Y. Liu, P.K. Liaw, Probing the phase transformation and dislocation evolution in dual-phase high-entropy alloys. Int. J. Plast. 114, 161–173 (2019). https://doi.org/10.1016/j.ijplas.2018.10.01410.1016/j.ijplas.2018.10.014 ↗

38. T. Uhlířová, W. Pabst, Phase mixture modeling of the grain size dependence of Young’s modulus and thermal conductivity of alumina and zirconia ceramics. J. Eur. Ceram. Soc. 40(8), 3181–3190 (2020). https://doi.org/10.1016/j.jeurceramsoc.2020.01.06910.1016/j.jeurceramsoc.2020.01.069 ↗

39. X. Li, Y. Wei, L. Lu, K. Lu, H. Gao, Dislocation nucleation governed softening and maximum strength in nano-twinned metals. Nature 464(7290), 877–880 (2010). https://doi.org/10.1038/nature0892910.1038/nature08929 ↗

40. W.M. Ji, M.S. Wu, Inhibiting the inverse Hall-Petch behavior in CoCuFeNiPd high-entropy alloys with short-range ordering and grain boundary segregation. Scr. Mater. 221, 114950 (2022). https://doi.org/10.1016/j.scriptamat.2022.11495010.1016/j.scriptamat.2022.114950 ↗

41. M. Zhang, Z. Rao, T. Xu, L. Fang, Quantifying the influence of grain boundary activities on Hall-Petch relation in nanocrystalline Cu by using phase field and atomistic simulations. Int. J. Plast. 135, 102846 (2020). https://doi.org/10.1016/j.ijplas.2020.10284610.1016/j.ijplas.2020.102846 ↗

42. C. Huang, X.H. Peng, B. Yang, S.Y. Weng, Y.B. Zhao, T. Fu, Grain size dependence of tensile properties in nanocrystalline diamond. Comput. Mater. Sci. 157, 67–74 (2019). https://doi.org/10.1016/j.commatsci.2018.10.02710.1016/j.commatsci.2018.10.027 ↗

43. M. Nasim, Y.C. Li, C.E. Wen, Length-scale dependent deformation, strengthening, and ductility of fcc/fcc Ni/Al nanolaminates using micropillar compression testing. Acta Mater. 193, 318–328 (2020). https://doi.org/10.1016/j.actamat.2020.04.04310.1016/j.actamat.2020.04.043 ↗

44. J.H. Zhou, Y.F. Li, C.Y. Lu, H.X. Li, W.J. Zheng, Y.H. Ma, Z.L. Gao, J.G. Yang, Y.M. He, Molecular dynamics simulation of the tensile response and deformation mechanism of diamond/TiC combinations. Comput. Mater. Sci. 215, 111779 (2022). https://doi.org/10.1016/j.commatsci.2022.11177910.1016/j.commatsci.2022.111779 ↗