Dual plasma deposition of Ag-Cu metal incorporated diamond-like carbon coatings: Structural, electrochemical, and antibacterial properties

1. W. Abd-Elaziem, M.A. Darwish, A. Hamada, W.M. Daoush, Titanium-based alloys and composites for orthopedic implants applications: a comprehensive review. Mater. Des. (2024). https://doi.org/10.1016/j.matdes.2024.11285010.1016/j.matdes.2024.112850 ↗

2. M.H. Mobarak, A.S. Abid, M.S. Munna, M. Dutta, M.I.H. Rimon, Additive manufacturing in biomedical: applications, challenges, and prospects. Hybrid Adv. (2025). https://doi.org/10.1016/j.hybadv.2025.10046710.1016/j.hybadv.2025.100467 ↗

3. M. Liu, W. Gong, R. Zheng, J. Li, Z. Zhang, S. Gao, C. Ma, N. Tsuji, Achieving excellent mechanical properties in type 316 stainless steel by tailoring grain size in homogeneously recovered or recrystallized nanostructures. Acta Mater. (2022). https://doi.org/10.1016/j.actamat.2022.11762910.1016/j.actamat.2022.117629 ↗

4. T. Sujitno, W. Suprapto, E. Andriyanti, S. Mulyani, A.W. Prabowo, Nugroho, The Effects of Plasma Nitrocarburizing on Morphology, Mechanical Properties, and Corrosion Behavior of Austenitic SS 316L, in: AIP Conference Proceedings 2381, 020089, American Institute of Physics Inc., 2021. https://doi.org/10.1063/12.000598510.1063/12.0005985 ↗

5. Y. Peng, J. Peng, Z. Wang, Y. Xiao, X. Qiu, Diamond-like carbon coatings in the biomedical field: properties, applications and future development. Coatings (2022). https://doi.org/10.3390/coatings1208108810.3390/coatings12081088 ↗

6. T. Suprapto, W. Sujitno, B. Andriyanti, Pribadi, The formation of diamond like carbon on carbon steel using plasma of argon-liquified petrolium gas mixing, AIP Conf. Proc. 2014 (2018). https://doi.org/10.1063/1.505442610.1063/1.5054426 ↗

7. J. Zhang, J. Lou, H. He, Y. Xie, Comparative Investigation on the Tribological Performances of TiN, TiCN, and Ti-DLC Film-Coated Stainless Steel. JOM. 71, 4872–4879 (2019). https://doi.org/10.1007/s11837-019-03718-y10.1007/s11837-019-03718-y ↗

8. W.H. Lee, C.C. Hu, Y.T.A. Sun, B.Y. Wang, H. Chang, C.Y. Hsu, Influence of methane flow ratios on the structural and mechanical properties of Ti-doped diamond-like carbon films. Int. J. Adv. Manuf. Technol. 129, 1145–1157 (2023). https://doi.org/10.1007/s00170-023-12368-z10.1007/s00170-023-12368-z ↗

9. Y. Guo, P. Guo, L. Sun, X. Li, P. Ke, Q. Li, A. Wang, Tribological properties of Ti-doped diamond-like carbon coatings under dry friction and PAO oil lubrication. Surf. Interface Anal. 51, 361–370 (2019). https://doi.org/10.1002/sia.658810.1002/sia.6588 ↗

10. M. Birkett, A.W. Zia, D.K. Devarajan, M.I. Soni, T.J. Panayiotidis, M.M. Joyce, Á. Tambuwala, Serrano-Aroca, Multi-functional bioactive silver- and copper-doped diamond-like carbon coatings for medical implants. Acta Biomater. 167, 54–68 (2023). https://doi.org/10.1016/j.actbio.2023.06.03710.1016/j.actbio.2023.06.037 ↗

11. G. Morand, P. Chevallier, L. Bonilla-Gameros, S. Turgeon, M. Cloutier, M. Da Silva Pires, A. Sarkissian, M. Tatoulian, L. Houssiau, D. Mantovani, On the adhesion of diamond-like carbon coatings deposited by low-pressure plasma on 316L stainless steel. Surf. Interface Anal. 53, 658–671 (2021). https://doi.org/10.1002/sia.695310.1002/sia.6953 ↗

12. M. Haneef, M. Evaristo, A. Morina, L. Yang, B. Trindade, New nanoscale multilayer magnetron sputtered Ti-DLC/DLC coatings with improved mechanical properties. Surf. Coat. Technol. 480, 130595 (2024). https://doi.org/10.1016/j.surfcoat.2024.13059510.1016/j.surfcoat.2024.130595 ↗

13. W. Xie, C. Guo, Y. Zhao, L. Chen, B. Liao, S. Zhang, Development of Ti/Ti-DLC multilayers on magnesium alloys. Part 1: Microstructure and mechanical properties. Surf. Coat. Technol. 477, 130328 (2024). https://doi.org/10.1016/j.surfcoat.2023.13032810.1016/j.surfcoat.2023.130328 ↗

14. W. Xie, C. Guo, Y. Zhao, L. Chen, B. Liao, S. Zhang, Development of Ti/Ti-DLC multilayers on magnesium alloys — Part 2: Corrosion and wear resistance. Surf. Coat. Technol. 477, 130332 (2024). https://doi.org/10.1016/j.surfcoat.2023.13033210.1016/j.surfcoat.2023.130332 ↗

15. I. Bouabibsa, S. Lamri, A. Alhussein, T. Minea, F. Sanchette, Plasma investigations and deposition of Me-DLC (Me = Al, Ti or Nb) obtained by a magnetron sputtering-RFPECVD hybrid process. Surf. Coat. Technol. 354, 351–359 (2018). https://doi.org/10.1016/j.surfcoat.2018.09.03310.1016/j.surfcoat.2018.09.033 ↗

16. N.R. Lee, Y.S. Jun, C.S. Lee, Ti-doped hydrogenated diamond like carbon coating deposited by hybrid physical vapor deposition and plasma enhanced chemical vapor deposition. Jpn. J. Appl. Phys. (2017). https://doi.org/10.7567/JJAP.56.03550610.7567/JJAP.56.035506 ↗

17. P.P. Jing, D.L. Ma, Y.L. Gong, X.Y. Luo, Y. Zhang, Y.J. Weng, Y.X. Leng, Influence of Ag doping on the microstructure, mechanical properties, and adhesion stability of diamond-like carbon films. Surf. Coat. Technol. (2021). https://doi.org/10.1016/j.surfcoat.2020.12654210.1016/j.surfcoat.2020.126542 ↗

18. E. Mohagheghpour, M.M. Larijani, M. Rajabi, R. Gholamipour, Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films. Int. J. Eng. Trans. A 34, 706–713 (2021). https://doi.org/10.5829/ije.2021.34.03c.1510.5829/ije.2021.34.03c.15 ↗

19. M. Jelínek, J. Zemek, J. Remsa, J. Mikšovský, T. Kocourek, P. Písařík, M. Trávníčková, E. Filová, L. Bačáková, Hybrid laser technology and doped biomaterials. Appl. Surf. Sci. 417, 73–83 (2017). https://doi.org/10.1016/j.apsusc.2017.03.10310.1016/j.apsusc.2017.03.103 ↗

20. D. Bociaga, P. Komorowski, D. Batory, W. Szymanski, A. Olejnik, K. Jastrzebski, W. Jakubowski, Silver-doped nanocomposite carbon coatings (Ag-DLC) for biomedical applications - physiochemical and biological evaluation. Appl. Surf. Sci. 355, 388–397 (2015). https://doi.org/10.1016/j.apsusc.2015.07.11710.1016/j.apsusc.2015.07.117 ↗

21. A.A. Javidparvar, M.A. Mosavi, B. Ramezanzadeh, Nickel-aluminium bronze (NiBRAl) casting alloy tribological/corrosion resistance properties improvement via deposition of a Cu-doped diamond-like carbon (DLC) thin film; optimization of sputtering magnetron process conditions. Mater. Chem. Phys. 296, 127279 (2023). https://doi.org/10.1016/j.matchemphys.2022.12727910.1016/j.matchemphys.2022.127279 ↗

22. P.B. Milan, S. Khamseh, P. Zarrintaj, B. Ramezanzadeh, M. Badawi, S. Morisset, H. Vahabi, M.R. Saeb, M. Mozafari, Copper-enriched diamond-like carbon coatings promote regeneration at the bone–implant interface. Heliyon 6, e03798 (2020). https://doi.org/10.1016/j.heliyon.2020.e0379810.1016/j.heliyon.2020.e03798 ↗

23. S. Khamseh, E. Alibakhshi, M. Mahdavian, M.R. Saeb, H. Vahabi, N. Kokanyan, P. Laheurte, Magnetron-sputtered copper/diamond-like carbon composite thin films with super anti-corrosion properties. Surf. Coat. Technol. 333, 148–157 (2018). https://doi.org/10.1016/j.surfcoat.2017.11.01210.1016/j.surfcoat.2017.11.012 ↗

24. M.S. Khan, C. Sasikumar, Diamond-like carbon/Cu composite films on stainless steel: synthesis and investigation of heat transfer properties. J. Nanopart. Res. 26, 1–13 (2024). https://doi.org/10.1007/s11051-024-05964-x10.1007/s11051-024-05964-x ↗

25. F.V. Kiryukhantsev-Korneev, A.V. Bondarev, Structure and properties of antifriction Cu, Cu–C, and DLC coatings. Phys. Met. Metallogr. 120, 702–708 (2019). https://doi.org/10.1134/S0031918X1905008910.1134/S0031918X19050089 ↗

26. M. Zhang, T. Xie, X. Qian, Y. Zhu, X. Liu, Mechanical properties and biocompatibility of Ti-doped diamond-like carbon films. ACS Omega 5, 22772–22777 (2020). https://doi.org/10.1021/acsomega.0c0171510.1021/acsomega.0c01715 ↗

27. M. Ikuta, A.A. Harumningtyas, T. Ito, K. Fujita, T. Kitahara, M. Bun, T. Furuichi, H. Hirai, Y. Ukon, D. Tateiwa, Y. Kanie, M. Furuya, T. Fujimori, S. Okada, S. Hamaguchi, T. Kaito, Comparing the osteogenic effects of sputtered titanium- and strontium titanate (STO)-modified polyetheretherketone. Emergent Mater. (2025). https://doi.org/10.1007/s42247-025-01033-810.1007/s42247-025-01033-8 ↗

28. A.A. Harumningtyas, T. Ito, M. Ikuta, T. Kaito, S. Hamaguchi, Polyetheretherketone (PEEK) Implant Functionalization with Magnetron-Sputtered SrTiO 3 for Regenerative Medicine (2023). www.begellhouse.com10.1615/PlasmaMed.2023051355 ↗

29. P. Písařík, M. Jelínek, J. Remsa, J. Mikšovský, J. Zemek, K. Jurek, J. Kubinová, J. Lukeš, J. Šepitka, Antibacterial, mechanical and surface properties of Ag-DLC films prepared by dual PLD for medical applications. Mater. Sci. Eng. C Mater. Biol. Appl. 77, 955–962 (2017). https://doi.org/10.1016/j.msec.2017.04.00510.1016/j.msec.2017.04.005 ↗

30. J. Kodama, A.A. Harumningtyas, T. Ito, M. Michlíček, S. Sugimoto, H. Kita, R. Chijimatsu, Y. Ukon, J. Kushioka, R. Okada, T. Kamatani, K. Hashimoto, D. Tateiwa, H. Tsukazaki, S. Nakagawa, S. Takenaka, T. Makino, Y. Sakai, D. Nečas, L. Zajíčková, S. Hamaguchi, T. Kaito, Amine modification of calcium phosphate by low-pressure plasma for bone regeneration. Sci. Rep. (2021). https://doi.org/10.1038/s41598-021-97460-810.1038/s41598-021-97460-8 ↗

31. A.A. Harumningtyas, T. Ito, H. Kita, J. Kodama, T. Kaito, S. Hamaguchi, Amine plasma polymers deposited on porous hydroxyapatite artificial bone with bipolar pulsed discharges. J. Vacuum Sci. Technol. A 42 (2024). https://doi.org/10.1116/6.000372410.1116/6.0003724 ↗

32. M. Ananda Gifari, A. Wiwien, A. Haerul, Growth of TiN thin film on Al 5083 deposited using dc sputtering technique for improving their hardness and corrosion resistance. J. Phys. Conf. Ser. 1436, 012079 (2020). https://doi.org/10.1088/1742-6596/1436/1/01207910.1088/1742-6596/1436/1/012079 ↗

33. M.S. Lee, H.R. Hussein, S.W. Chang, C.Y. Chang, Y.Y. Lin, Y. Chien, Y.P. Yang, L.V. Kiew, C.Y. Chen, S.H. Chiou, C.C. Chang, Nature-inspired surface structures design for antimicrobial applications. Int. J. Mol. Sci. (2023). https://doi.org/10.3390/ijms2402134810.3390/ijms24021348 ↗

34. W. Andriyanti, F. Nurfiana, A.N. Sari, N.A. Kundari, I. Aziz, Synthesis TiO2-Ag thin film by DC sputtering method for dye degradation. J. Phys. Conf. Ser. 1436, 012008 (2020). https://doi.org/10.1088/1742-6596/1436/1/01200810.1088/1742-6596/1436/1/012008 ↗

35. I. Aziz, E. Mulyani, Y. Yusuf, Morphological, mechanical and antibacterial properties of Ti–Cu–N thin films deposited by sputtering DC. Heliyon (2023). https://doi.org/10.1016/j.heliyon.2023.e1717010.1016/j.heliyon.2023.e17170 ↗

36. S.L.K. Konuru, V. Umasankar, A. Sarma, A comparison of qualitative and quantitative adhesion analysis for a composite thin film system, in: Mater. Today Proc., Elsevier Ltd, 2021: pp. 1243–1246. https://doi.org/10.1016/j.matpr.2021.02.07110.1016/j.matpr.2021.02.071 ↗

37. N. Vidakis, A. Antoniadis, N. Bilalis, The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds. J. Mater. Process. Technol. 0136, 481–485 (2003). https://doi.org/10.1016/S0924-0136(03)00300-510.1016/S0924-0136(03)00300-5 ↗

38. S. Maitz, S. Poelzl, D. Dreisiebner, E. Zarschenas, C. Kittinger, Antimicrobial non-porous surfaces: a comparison of the standards ISO 22196:2011 and the recently published ISO 7581:2023. Front. Microbiol. 15 (2024). https://doi.org/10.3389/fmicb.2024.140026510.3389/fmicb.2024.1400265 ↗

39. N.K. Manninen, R.E. Galindo, S. Carvalho, A. Cavaleiro, Silver surface segregation in Ag-DLC nanocomposite coatings. Surf. Coat. Technol. 267, 90–97 (2015). https://doi.org/10.1016/j.surfcoat.2014.12.02910.1016/j.surfcoat.2014.12.029 ↗

40. M. Basak, M.L. Rahman, M.F. Ahmed, B. Biswas, N. Sharmin, The use of X-ray diffraction peak profile analysis to determine the structural parameters of cobalt ferrite nanoparticles using Debye-Scherrer, Williamson-Hall, Halder-Wagner and Size-strain plot: different precipitating agent approach. J. Alloys Compd. (2022). https://doi.org/10.1016/j.jallcom.2021.16269410.1016/j.jallcom.2021.162694 ↗

41. I. Sondi, B. Salopek-Sondi, Silver nanoparticles as antimicrobial agent: a case study on E. coli as a model for Gram-negative bacteria. J. Colloid Interface Sci. 275, 177–182 (2004). https://doi.org/10.1016/j.jcis.2004.02.01210.1016/j.jcis.2004.02.012 ↗

42. S. Mahmoodi, A. Elmi, S. Hallaj Nezhadi, Copper Nanoparticles as Antibacterial Agents. J. Mol. Pharm. Org. Process. Res. 06 (2018). https://doi.org/10.4172/2329-9053.100014010.4172/2329-9053.1000140 ↗

43. W.R. Li, X.B. Xie, Q.S. Shi, H.Y. Zeng, Y.S. Ou-Yang, Antibacterial activity and mechanism of silver nanoparticles on Escherichia coli. Appl. Microbiol. Biotechnol. 85, 1115–1122 (2010). https://doi.org/10.1007/s00253-009-2159-510.1007/s00253-009-2159-5 ↗

44. M. Šolc, P. Blaško, J. Petrík, P. Palfy, L. Girmanová, The indentation size effect (ISE) of Ag–Cu alloys. Crystals (2023). https://doi.org/10.3390/cryst1301009110.3390/cryst13010091 ↗

45. L. Kong, Y. Zhou, K. Song, D. Hui, H. Hu, B. Guo, J. Kang, C. Feng, J. Cao, Effect of aging on properties and nanoscale precipitates of Cu-Ag-Cr alloy. Nanotechnol. Rev. 9, 70–78 (2020). https://doi.org/10.1515/ntrev-2020-000710.1515/ntrev-2020-0007 ↗

46. Y.C. Wang, C.S. Chen, H.Y.T. Chen, F.Y. Ouyang, Influence of solute doping on nanotwinning, texture, and properties of Co-sputtered Ag–Cu alloy thin films. Applied Surface Science Advances (2025). https://doi.org/10.1016/j.apsadv.2025.10083110.1016/j.apsadv.2025.100831 ↗

47. S. Zhang, T. Wang, F. Liu, J. Yang, J. Qin, Y. Cheng, Effect of surface roughness on the properties of Ag/Cu composite strips. J. Mater. Eng. Perform. 34, 10516–10525 (2025). https://doi.org/10.1007/s11665-024-09761-410.1007/s11665-024-09761-4 ↗

48. Y. Wang, Y. Qian, Y. Ma, Z. Wang, S. Zhang, D. Xiang, Effect of Friction Depth, Velocity, and Cu Content on the Friction Behavior of AgCu Alloy by Molecular Dynamics Simulation. Surf. Sci. Technol. 3 (2025). https://doi.org/10.1007/s44251-025-00089-210.1007/s44251-025-00089-2 ↗

49. I. Manika, J. Maniks, Effect of substrate hardness and film structure on indentation depth criteria for film hardness testing. Journal of Physics D: Applied Physics (2008). https://doi.org/10.1088/0022-3727/41/7/07401010.1088/0022-3727/41/7/074010 ↗

50. H. Zhao, Y. Zhong, Z. Ma, Effects of indentation depth on micro hardness and scratch behavior of thin composite laminate. J. Alloys Compd. 680, 105–108 (2016). https://doi.org/10.1016/j.jallcom.2016.04.10810.1016/j.jallcom.2016.04.108 ↗

51. M.G.J. Veprek-Heijman, S. Veprek, The deformation of the substrate during indentation into superhard coatings: Bückle’s rule revised. Surf. Coat. Technol. 284, 206–214 (2015). https://doi.org/10.1016/j.surfcoat.2015.10.06410.1016/j.surfcoat.2015.10.064 ↗

52. H. Wang, L. Wang, X. Wang, Structure characterization and antibacterial properties of Ag-DLC films fabricated by dual-targets HiPIMS. Surf. Coat. Technol. 410 (2021). https://doi.org/10.1016/j.surfcoat.2021.12696710.1016/j.surfcoat.2021.126967 ↗

53. W.C. Da Silva Junior, C.M. Pereira, De F. Souza, C. Da Silva Bortoli, R.C. Frajuca, Souza, Obtaining the predicted number of cycles of femoral prosthesis manufactured with ASTM F138 and ASTM F75 aloys, applying the method of finite element Phys. Conf. Ser. (IOP Publishing Ltd, 2021). https://doi.org/10.1088/1742-6596/1730/1/01202610.1088/1742-6596/1730/1/012026 ↗

54. M.S. Khan, L.K. Katiyar, M. Kumar, C. Sasikumar, Substrate-dependent properties of PECVD-deposited diamond-like carbon films: structural, morphological, and mechanical insights. J. Nanopart. Res. 27 (2025). https://doi.org/10.1007/s11051-025-06409-910.1007/s11051-025-06409-9 ↗

55. S. Hussain, A.K. Pal, Synthesis of composite films of mixed Ag-Cu nanocrystallites embedded in DLC matrix and associated surface plasmon properties. Appl. Surf. Sci. 253, 3649–3657 (2007). https://doi.org/10.1016/j.apsusc.2006.07.07410.1016/j.apsusc.2006.07.074 ↗

56. D.B. Margono, F. Darmadi, T.D. Gapsari, M. Widodo, Kozin, Enhancing surface properties of Al 6061 alloy using duplex TiNi films via plasma nitriding. Results Surf. Interfaces. 18, 100434 (2025). https://doi.org/10.1016/j.rsurfi.2025.10043410.1016/j.rsurfi.2025.100434 ↗

57. Y. Wu, S. Zhou, W. Zhao, L. Ouyang, Comparative corrosion resistance properties between (Cu, Ce)-DLC and Ti co-doped (Cu, Ce)/Ti-DLC films prepared via magnetron sputtering method. Chem. Phys. Lett. 705, 50–58 (2018). https://doi.org/10.1016/j.cplett.2018.05.06110.1016/j.cplett.2018.05.061 ↗

58. D.B. Margono, F. Darmadi, T. Gapsari, Dwi, Enhanced corrosion resistance of aluminum 6061 alloy using Ti-based thin films and plasma nitriding. JCIS Open. 18, 100139 (2025). https://doi.org/10.1016/j.jciso.2025.10013910.1016/j.jciso.2025.100139 ↗

59. H. Bakhtiari-Zamani, E. Saebnoori, H.R. Bakhsheshi-Rad, F. Berto, Corrosion and wear behavior of TiO2/TiN duplex coatings on titanium by plasma electrolytic oxidation and gas nitriding. Materials (2022). https://doi.org/10.3390/ma1523830010.3390/ma15238300 ↗

60. B. Sarac, E. Sharifikolouei, Y. Zheng, E. Yüce, A. Asci, J. Keckes, A.S. Sarac, J. Eckert, Electrochemical impedance behavior and corrosion resistance of amorphous 316-type stainless steel microfibers in saline environment. Mater. Today Commun. (2025). https://doi.org/10.1016/j.mtcomm.2025.11217810.1016/j.mtcomm.2025.112178 ↗

61. D.B. Margono, F. Darmadi, T.D. Gapsari, M. Widodo, Kozin, Enhancing surface properties of Al 6061 alloy using duplex TiNi films via plasma nitriding. Results Surf. Interfaces. 18 (2025). https://doi.org/10.1016/j.rsurfi.2025.10043410.1016/j.rsurfi.2025.100434 ↗

62. Z. Sharifalhoseini, M.H. Entezari, A. Davoodi, M. Shahidi, Surface modification of mild steel before acrylic resin coating by hybrid ZnO/GO nanostructures to improve the corrosion protection. J. Ind. Eng. Chem. 83, 333–342 (2020). https://doi.org/10.1016/j.jiec.2019.12.00610.1016/j.jiec.2019.12.006 ↗

63. S.M. Gateman, O. Gharbi, H. Gomes de Melo, K. Ngo, M. Turmine, V. Vivier, On the use of a constant phase element (CPE) in electrochemistry. Curr. Opin. Electrochem. (2022). https://doi.org/10.1016/j.coelec.2022.10113310.1016/j.coelec.2022.101133 ↗

64. D.B. Margono, F. Darmadi, T.D. Gapsari, B.M. Widodo, Kartika, Enhanced corrosion resistance of aluminum 6061 alloy using Ti-based thin films and plasma nitriding. JCIS Open. 18 (2025). https://doi.org/10.1016/j.jciso.2025.10013910.1016/j.jciso.2025.100139 ↗

65. O. Sharifahmadian, F. Mahboubi, S. Yazdani, Comparison between corrosion behaviour of DLC and N-DLC coatings deposited by DC-pulsed PACVD technique. Diam. Relat. Mater. 95, 60–70 (2019). https://doi.org/10.1016/j.diamond.2019.04.00710.1016/j.diamond.2019.04.007 ↗

66. Z.J. Zheng, Y. Gao, Y. Gui, M. Zhu, Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing. Corros. Sci. 54, 60–67 (2012). https://doi.org/10.1016/j.corsci.2011.08.04910.1016/j.corsci.2011.08.049 ↗

67. Z. Wang, K. Yliniemi, B.P. Wilson, M. Lundstöm, Targeted surface modification of Cu/Zn/Ag coatings and Ag/Cu particles based on sacrificial element selection by electrodeposition and redox replacement. Surf. Coat. Technol. 441 (2022). https://doi.org/10.1016/j.surfcoat.2022.12853110.1016/j.surfcoat.2022.128531 ↗

68. K. Xi, H. Wu, C. Zhou, Z. Qi, K. Yang, R.K.Y. Fu, S. Xiao, G. Wu, K. Ding, G. Chen, P.K. Chu, Improved corrosion and wear resistance of micro-arc oxidation coatings on the 2024 aluminum alloy by incorporation of quasi-two-dimensional sericite microplates. Appl. Surf. Sci. (2022). https://doi.org/10.1016/j.apsusc.2022.15269310.1016/j.apsusc.2022.152693 ↗

69. J. Vega, H. Scheerer, G. Andersohn, M. Oechsner, Experimental studies of the e ff ect of Ti interlayers on the corrosion resistance of TiN PVD coatings by using electrochemical methods. Corros. Sci. 133, 240–250 (2018). https://doi.org/10.1016/j.corsci.2018.01.01010.1016/j.corsci.2018.01.010 ↗

70. M. Azzi, M. Paquette, J.A. Szpunar, J.E. Klemberg-Sapieha, L. Martinu, Tribocorrosion behaviour of DLC-coated 316L stainless steel. Wear. 267, 860–866 (2009). https://doi.org/10.1016/j.wear.2009.02.00610.1016/j.wear.2009.02.006 ↗

71. S. Li, H. Li, P. Guo, X. Li, W. Yang, G. Ma, K. Nishimura, P. Ke, A. Wang, Enhanced long-term corrosion resistance of 316L stainless steel by multilayer amorphous carbon coatings. Materials (2024). https://doi.org/10.3390/ma1709212910.3390/ma17092129 ↗

72. B. Sarac, E. Sharifikolouei, Y. Zheng, E. Yüce, A. Asci, J. Keckes, A.S. Sarac, J. Eckert, Electrochemical impedance behavior and corrosion resistance of amorphous 316-type stainless steel microfibers in saline environment. Mater. Today Commun. 44, 112178 (2025). https://doi.org/10.1016/j.mtcomm.2025.11217810.1016/j.mtcomm.2025.112178 ↗

73. M. Zhu, S. Zeng, H. Zhang, J. Li, B. Cao, Electrochemical study on the corrosion behaviors of 316 SS in HITEC molten salt at different temperatures. Sol. Energy Mater. Sol. Cells 186, 200–207 (2018). https://doi.org/10.1016/j.solmat.2018.06.04410.1016/j.solmat.2018.06.044 ↗

74. U. Morali, S. Erol, Analysis of electrochemical impedance spectroscopy response for commercial lithium-ion batteries: modeling of equivalent circuit elements. Turk. J. Chem. 44, 602–613 (2020). https://doi.org/10.3906/KIM-1910-7210.3906/KIM-1910-72 ↗

75. A.C. Ferrari, J. Robertson, Interpretation of Raman spectra of disordered and amorphous carbon. Phys. Rev. B 61, 95–107 (2000)10.1103/PhysRevB.61.14095 ↗

76. J. Robertson, Diamond-like amorphous carbon. Mater. Sci. Eng. R. Rep. 37, 129–281 (2002)10.1016/S0927-796X(02)00005-0 ↗

77. G. Liu, Z. Wen, K. Chen, L. Dong, Z. Wang, B. Zhang, Optimizing the Microstructure, Mechanical, and Tribological Properties of Si-DLC Coatings on NBR Rubber for Its Potential Applications. Caoatings. 10, 1–19 (2020)

78. A. Varade, K.N. Reddy, D. Sasen, A. Krishna, M. Chellamalai, P.V. Shashikumar, Detailed Raman study of DLC coating on Si (100) made by RF- PECVD. Procedia Eng. 97, 1452–1456 (2014). https://doi.org/10.1016/j.proeng.2014.12.42810.1016/j.proeng.2014.12.428 ↗

79. F. Peng, Y. Lin, D. Zhang, Q. Ruan, K. Tang, M. Li, X. Liu, P.K. Chu, Y. Zhang, Corrosion behavior and biocompatibility of diamond-like carbon- coated zinc: an in vitro study. ACS Omega 6, 9843–9851 (2021). https://doi.org/10.1021/acsomega.1c0053110.1021/acsomega.1c00531 ↗

80. P. Wongpanya, T. Wongpinij, P. Photongkam, J. Siritapetawee, Improvement in corrosion resistance of 316L stainless steel in simulated body fluid mixed with antiplatelet drugs by coating with Ti-doped DLC films for application in biomaterials. Corros. Sci. 208, 110611 (2022). https://doi.org/10.1016/j.corsci.2022.11061110.1016/j.corsci.2022.110611 ↗

81. B.G. Pound, The use of electrochemical techniques to evaluate the corrosion performance of metallic biomedical materials and devices. J. Biomed. Mater. Res. B Appl. Biomater. 107, 1189–1198 (2019). https://doi.org/10.1002/jbm.b.3421210.1002/jbm.b.34212 ↗

82. Z.M. Rosli, Z. Mahamud, J.M. Juoi, N. Nayan, K.W. Loon, Y. Yusuf, H.E.A. Maulod, Corrosion behavior of AZ91 Mg-alloy coated with ALN and TiN in NaCl and hank’s solution. Adv. Mat. Res. 275–279 (2013). https://doi.org/10.4028/www.scientific.net/AMR.626.27510.4028/www.scientific.net/AMR.626.275 ↗

83. J. McElligott, Z. Shi, Y. Li, C. Wen, A. Atrens, Corrosion of Ti35Zr28Nb in Hanks’ solution and 3.5 wt% NaCl solution. Mater. Corros. 69, 197–206 (2018). https://doi.org/10.1002/maco.20170968410.1002/maco.201709684 ↗

84. M. Razavi, Y. Huang, Assessment of magnesium-based biomaterials: from bench to clinic. Biomater. Sci. 7, 2241–2263 (2019). https://doi.org/10.1039/c9bm00289h10.1039/c9bm00289h ↗

85. A.C. Scalia, Z. Najmi, Targeting bacterial biofilms on medical implants: current and emerging approaches. Antibiotics (2025). https://doi.org/10.3390/antibiotics1408080210.3390/antibiotics14080802 ↗