Improved mechanical and in-vitro corrosion properties of Mg-Al-Ti alloy by alloying element and plasma nitriding treatment
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (98)
Show source-provided references
1. Y. Li, D. San Martín, J. Wang, C. Wang, W. Xu, A review of the thermal stability of metastable austenite in steels: Martensite formation. J. Mater. Sci. Technol. 91, 200–214 (2021)10.1016/j.jmst.2021.03.020 ↗
2. D. Wu, J. Liu, J. Sun, R. Wang, J. Liu, Y. Wang et al., Investigation of synergistic activation effect of nanobubbles and fine-grained minerals on hydrate formation. Fuel. 407, 137314 (2026)10.1016/j.fuel.2025.137314 ↗
3. M. Setiawan, S.M. Agustini, M. Bahrudin, N.D. Lestari, M. Rifa’i, Verbascoside A as potent compound of cyperus rotundus in cytotoxic T lymphocyte-associated antigen-4 (CTLA-4) inhibition based on computational model. Trop. J. Nat. Prod. Res. 9(7), 32912–3296 (2025)10.26538/tjnpr/v9i7.57 ↗
4. E.K. Hayati, A. Sabarudin, S. Firdaus, M. Rafi, In silico study of anticancer activity of acalypha indica bioactive compounds against the ERα receptor. In IOP Conference Series: Earth and Environmental Science (IOP Publishing, 2025), p. 01200410.1088/1755-1315/1439/1/012004 ↗
5. C. Shen, C. Wang, X. Wei, Y. Li, van der S. Zwaag, W. Xu, Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel. Acta Mater. 179, 201–214 (2019)10.1016/j.actamat.2019.08.033 ↗
6. C.W. Kartikowati, R.A. Pradana, S.P.L. Sinaga, O. Arutanti, A.F. Arif, TiO2/Fe2O3 composites: a strategy for efficient photocatalytic degradation of textile waste under visible light. AIP Conference Proceedings (AIP Publishing LLC, 2025), p. 04000210.1063/5.0264966 ↗
7. M. Jibril, H. Suryanto, A. Aminnudin, S.B. Joseph, R.S. Mavinkere, S Suchart, U. Yanuhar, Morphological and crystallinity properties of bacterial nanocellulose foam reinforced by copper oxide nanoparticles. Mater. Res. Proc. 5310.21741/9781644903575-29 ↗
8. D. Rachmawati, T. Saskianti, R.D. Ridwan, N. Prasetyaningrum, M. Kanawa, Fabrication and Characterization of Nano Hydroxyapatite-Collagen Scaffold Soaked in the Secretome of Stem Cells from Human Exfoliated Deciduous Teeth as a Bone Tissue Engineering Scaffold. J. Int. Dent. Med. Res. 18(2), 504–509 (2025)
9. Y. Liu, L. Shao, S. Zhang, L. Hu, Y. Wu, C. Liu et al., Effect of chemical composition and heat treatment on the microstructure and performance of Ag-based alloy wires. Mater. Des. 258, 114728 (2025)10.1016/j.matdes.2025.114728 ↗
10. L. Zhang, H. Zhang, Ti-based metallic glass composites containing β-Ti dendrites. Prog. Mater. Sci. 152, 101472 (2025)10.1016/j.pmatsci.2025.101472 ↗
11. E.B. Fauziyah Ma, Sihura, E.T.P. Ayu, C.W. Kartikowati, L. Qomariyah, F. Gapsari et al., Rapid synthesis and characterization of ZnO nanoparticles via microwave-assisted method for photocatalysis application. AIP Conference Proceedings (AIP Publishing LLC, 2025), p. 02000110.1063/5.0264968 ↗
12. L. Djakfar, M.Z. Arifin, A. Sabarudin, I.C. Dewi, I. Palgunadi, Identifying the effect of the hydrated lime on self-healing steel slag stone mastic asphalt using the induction heating method in tropical conditions. Eastern-Eur. J. Enterp. Technol. 2, 33–43 (2025)10.15587/1729-4061.2025.325722 ↗
13. A.R.A. Fabri, M. Masruri, S.M. Ulfa, W. Warstio, Nickel and Bimetallic Nanoparticles-Catalyzed Hydrogenation Turpentine under Mild Pressure. Russ. J. Gen. Chem. 95(10), 2823–2831 (2025)10.1134/S1070363225601231 ↗
14. N.L. Choirunnisa, D.C. Kezia, A.Z. Permana, N.A.N.N. Malek, F. Nurkolis, H.K. Permatasari, Modulation of pAKT and NF-κB pathways by Moringa oleifera silver nanoparticles: inducing apoptosis in cervical cancer cells. CyTA-Journal Food. 23(1), 2543878 (2025)10.1080/19476337.2025.2543878 ↗
15. M. Lu, X. Wang, J. Lin, Y. Chen, Y. Du, Modeling and analysis of specific cutting energy for Ti6Al4V alloy using quasi-intermittent vibration assisted swing cutting. Precis. Eng. 97, 817–827 (2025)10.1016/j.precisioneng.2025.11.004 ↗
16. J. Peng, S. Xie, T. Chen, X. Wang, X. Yu, L. Yang et al., Numerical Simulation and Process Optimization of Laser Welding in 6056 Aluminum Alloy T-Joints. Crystals. 15(1), 35 (2024)10.3390/cryst15010035 ↗
17. X. Yan, J. Hu, X. Zhang, W. Xu, Obtaining superior low-temperature wear resistance in Q&P-processed medium Mn steel with a low initial hardness. Tribol. Int. 175, 107803 (2022)10.1016/j.triboint.2022.107803 ↗
18. Q. Sun, L. Yang, F. Hu, C. Liang, H. Wang, J. Qi, Microstructural evolution and kinetics of monoclinic scheelite-type BiVO4-based materials with enhanced color performance. Ceram. Int. 51, 404142–40430 (2025)10.1016/j.ceramint.2025.06.276 ↗
19. R. Li, B. Wang, Y. Zhao, N. Zhang, X. Zhao, Z. Gao et al., In-situ growth of WO3/Bi2WO6 heterojunctions on carbon fiber cloth: design, morphology modulation and photocatalytic performance. J. Environ. Chem. Eng. 13, 118926 (2025)10.1016/j.jece.2025.118926 ↗
20. Z. Hu, L. Liu, X. Wang, H. Lu, Q. Zheng, Y. Gao et al., In situ integration of rapid ion-diffusion interlayers on Cu current collectors toward ultrafast anode-free sodium metal batteries. ACS Nano 19, 23193–23208 (2025)10.1021/acsnano.5c05043 ↗
21. T.L. Wargasetia, L.K. Liana, N. Widodo, Y. Annisa, F.E. Hermanto, Extract of Holothuria scabra exhibits synergistic effect with chemotherapeutic agents against breast cancer in vitro. J. Pharm. Pharmacognosy Res. 13(3), 919–924 (2025)10.56499/jppres24.2069_13.3.919 ↗
22. D.A. Puspitasari, C.W. Supriyono, Kartikowati, F. Gapsari, V.M. Pratiwi, N.P. Asri et al., The synthesis of Na2/3 [Fe1/2Mn1/2] O2 for sodium-ion batteries via the solid-state method: an exploration of its chemical structure and electronic conductivity. AIP Conference Proceedings (AIP Publishing LLC, 2025), p. 02000310.1063/5.0265018 ↗
23. W. Zhao, A. Yan, Z. Su, F. Huang, Q. Wang, S. Li et al., Multiobjective-optimization MoS2/Cd‐ZnIn2S4/CdS composites prepared by in situ structure‐tailored technique for high‐efficiency hydrogen generation. Small Struct. 5(7), 2300569 (2024)10.1002/sstr.202300569 ↗
24. J. Wang, Q. Pu, P. Ning, S. Lu, Activated carbon-based composites for capturing CO2: a review. Greenh. Gases Sci. Technol. 11(2), 377–393 (2021)10.1002/ghg.2051 ↗
25. Y. Zhang, L. Xu, J. Wang, H. Pan, M. Dou, Y. Teng et al., Bagasse-based porous flower-like MoS2/carbon composites for efficient microwave absorption. Carbon Lett. 35(1), 145–160 (2025)10.1007/s42823-024-00832-z ↗
26. A. Meizarini, F.S. Dirgantari, W.D. Permana Hibatullah, A.S. Batrisyia, Y.I. Kodi Isparan, H. Soekartono et al., LGR6 and β-catenin expression in wound healing of zinc oxide and curcuma longa extract dressing application in rattus norvegicus. Malay. J. Med. Health Sci. 21 , 86–91 (2025)10.47836/mjmhs.21.s2.13 ↗
27. K. Astuti, E. Yuliana, V. Mustikaningtyas, M. Ilyasa, F. Sari, R. Ningrum, Starch nanoparticles synthesized by the microemulsion method: characterization and their application as bioplastics. Rasayan J. Chem. 18(2) 989–996 (2025)10.31788/RJC.2025.1829168 ↗
28. D.A.T.A. Sanawi, B. Rumhayati, Q. Fardiyah, Bioadsorption of copper (II) using halmahera specific marine algae (Sargassum turbinarioides) encapsulated calcium alginate. Indones. J. Chem. 25(1), 145–156 (2025)10.22146/ijc.99090 ↗
29. X. Cheng, J. Hu, A. Wan, K. AL-Bukhaiti, W. Peng, J. Jiang, X. Ji, Optimizing inconel 718 micro-hole drilling using response surface and random forest methods. Measurement 262, 120032 (2025)10.1016/j.measurement.2025.120032 ↗
30. M.F. Baihaqi, H. Suryanto, A. Aminnudin, P. Puspitasari, J. Maulana, F. Nusantara et al., Analysis of crystallinity and morphology of bacterial cellulose/chitosan based composite film (BIO Web of Conferences: EDP Sciences, 2025), p. 01029202510.1051/bioconf/202518301029 ↗
31. B. Jin, X. Xu, Regional steel price index predictions for North China through machine learning. Int. J. Min. Mineral. Eng. 15(3), 314–350 (2024)10.1504/IJMME.2024.140697 ↗
32. Y. Zhang, X. Xu, Predicting the superconducting transition temperature and relative resistance ratio in YBa2Cu3O7 films. Physica C (Amsterdam, Neth.). 592, 1353998 (2022)10.1016/j.physc.2021.1353998 ↗
33. B. Jin, X. Xu, Forecasts of coking coal futures price indices through Gaussian process regressions. Mineral. Econ. 38(1), 203–217 (2025)10.1007/s13563-024-00472-9 ↗
34. Y. Zhang, X. Xu, Machine learning tensile strength and impact toughness of wheat straw reinforced composites. Mach. Learn. Appl. 6, 100188 (2021)
35. Y. Zhang, X. Xu, Machine learning band gaps of doped-TiO2 photocatalysts from structural and morphological parameters. ACS omega. 5(25), 15344–15352 (2020)10.1021/acsomega.0c01438 ↗
36. B. Jin, X. Xu, Machine learning brent crude oil price forecasts. Innov. Emerg. Technol. 11, 2450013 (2024)10.1142/S2737599424500130 ↗
37. Y. Zhang, X. Xu, Transformation temperature predictions through computational intelligence for NiTi-based shape memory alloys. Shape Memory Superelasticity. 6(4), 374–386 (2020)10.1007/s40830-020-00303-0 ↗
38. Y. Zhang, X. Xu, Predictions of adsorption energies of methane-related species on Cu-based alloys through machine learning. Mach. Learn. Appl. 3, 100010 (2021)
39. D. Mandal, L. Murmu, C. Choudhary, G. Singh, K. Sahoo, Influence of alloying elements and grain refiner on microstructure, mechanical and wear properties of Mg-Al-Zn alloys. Can. Metall. Q. 58(2), 241–251 (2019)10.1080/00084433.2018.1540087 ↗
40. Y. Yang, S. Cao, T. Ying, F. Cao, J. Wang, Q. Zhu, X. Zeng, The effects of a corrosion product film on the corrosion behavior of Mg-Al alloy with micro-alloying of yttrium in a chloride solution. Corros. Commun. 11, 12–22 (2023)10.1016/j.corcom.2022.10.002 ↗
41. J. Li, H. Liu, L. Liu, C. Guo, L. Yang, J. Li, J. Wang, Effect of aluminum and zinc on the corrosion behavior of AZ (Mg-Al-Zn) series magnesium alloys. J. Mater. Sci. Technol. 246, 116–130 (2025)10.1016/j.jmst.2025.04.007 ↗
42. O. Lunder, J. Nordien, K. Nisancioglu, Corrosion resistance of cast Mg-Al alloys. Corros. Rev. 15(3–4), 439–470 (1997)10.1515/CORRREV.1997.15.3-4.439 ↗
43. W. Wang, J. Liu, J. Chen, W. Zhang, C. Li, Z. Shi, N. Wang, Electrochemical corrosion behavior of Mg-Al-Sn alloys with different morphologies of β-Mg17Al12 phase as the anodes for Mg-air batteries. Electrochim. Acta. 470, 143352 (2023)10.1016/j.electacta.2023.143352 ↗
44. J. Yang, F. Cui, I.S. Lee, Surface modifications of magnesium alloys for biomedical applications. Ann. Biomed. Eng. 39, 1857–1871 (2011)10.1007/s10439-011-0300-y ↗
45. C. Jr Alves, Da E. Silva, A.E. Martinelli, Effect of workpiece geometry on the uniformity of nitrided layers. Surf. Coat. Technol. 139(1), 1–5 (2001)10.1016/S0257-8972(00)01146-4 ↗
46. T. Steiner, S.R. Meka, E. Bischoff, T. Waldenmaier, E.J. Mittemeijer, Nitriding of ternary Fe–Cr–Mo alloys; role of the Cr/Mo-ratio. Surf. Coat. Technol. 291, 21–33 (2016)10.1016/j.surfcoat.2016.02.011 ↗
47. A. Shanaghi, A.R. Souri, B. Mehrjou, P.K. Chu, Corrosion resistance, nano-mechanical properties, and biocompatibility of Mg-plasma-implanted and plasma-etched Ta/TaN hierarchical multilayered coatings on the nitrided AZ91 Mg alloy. Biomed. Mater. 16(4), 045028 (2021)10.1088/1748-605X/ac0318 ↗
48. F. Yan, B. Chen, J. Yao, D. Zhang, M. Yan, Y. Zhang, Characterization of microstructure and corrosion properties of AZ91D magnesium alloy surface-treated by coating-nitriding. J. Mater. Res. Technol. 14, 1559–1568 (2021)10.1016/j.jmrt.2021.07.065 ↗
49. S. Jegou, L. Barrallier, G. Fallot, Gaseous nitriding behaviour of 33CrMoV12-9 steel: Evolution of the grain boundaries precipitation and influence on residual stress development. Surf. Coat. Technol. 339, 78–90 (2018)10.1016/j.surfcoat.2018.01.068 ↗
50. Z. Kolozsvary, Residual stresses in nitriding. Handbook of residual stress and deformation of steel 209 – 19 (2002)
51. K.S. Jung, S.R. Meka, R.E. Schacherl, E. Bischoff, E.J. Mittemeijer, Nitride formation and excess nitrogen uptake after nitriding ferritic Fe-Ti-Cr alloys. Metall. Mater. Trans. A 43(3), 934–944 (2012)10.1007/s11661-011-0939-x ↗
52. G. Liang, R. Schulz, Synthesis of Mg-Ti alloy by mechanical alloying. J. Mater. Sci. 38(6), 1179–1184 (2003)10.1023/A:1022889100360 ↗
53. J. Qian, K. Farokhzadeh, A. Edrisy, Ion nitriding of a near-β titanium alloy: Microstructure and mechanical properties. Surf. Coat. Technol. 258, 134–141 (2014)10.1016/j.surfcoat.2014.09.044 ↗
54. J. Fan, R. Liu, X. Wang, Nitridation of Magnesium and its Application in Corrosion Resistance: A Review. Acta Metall. Sinica (English Letters). 38(11), 1873–1890 (2025)10.1007/s40195-025-01912-3 ↗
55. Y.-C. Zhao, H.-W. Ma, J.-D. Sun, J.-H. Luo, Y. Su, L. Feng et al., A Xanthium sibiricum biomimetic Fe-based medium-entropy alloy with significant antibacterial and mechanical behaviors. Rare Met. 44(7), 4913–4935 (2025)10.1007/s12598-024-03097-7 ↗
56. D. Setyowulan, S. Mohamed, E. Arifi, Failure mechanism of cold-formed steel frame with screw variations. In International Conference on Smart Cities (Springer, 2024), pp. 669 – 7710.1007/978-981-96-5848-0_53 ↗
57. I.S. Aisyah, A.R.M. Kusuma, N. Hasanah, W. Suprapto, The effect of powder composition on hardness, porosity and micro-structure of Al-SiC-Mg composite by hot isostatic pressing method. In AIP Conference Proceedings (AIP Publishing LLC, 2025), p. 09001310.1063/5.0259772 ↗
58. Z. Ni, B. Han, A. Nazarov, Z. Yuan, N. Li, H. Li et al., Enhanced formation quality and mechanical properties of ultrasonic spot welding of TA2 Ti sheets by pure Al coating. J. Manuf. Process. 156, 1–16 (2025)10.1016/j.jmapro.2025.10.084 ↗
59. K. Ren, R. Ma, Z. Wang, S. Qin, R. Chen, X. Ma et al., Grain size dependence of TiZrNbV spallation and impact-energy-release behavior. Int. J. Mech. Sci. 293, 110164 (2025)10.1016/j.ijmecsci.2025.110164 ↗
60. M. Xu, L. Xiao, B. Gao, Z. Li, Z. Wu, X. Chen et al., Strengthening mechanisms induced by sequential grain refinement and solid solution strengthening in dual-phase heterostructured Mg-Li alloys with low Al content. J. Alloys Compd. 1021, 179527 (2025)10.1016/j.jallcom.2025.179527 ↗
61. T. Nakata, C. Xu, K. Kaibe, L. Geng, S. Kamado, Role of Al content on tensile properties and stretch formability of Mg–Al–Mn alloy sheet produced by continuous hot-rolling. Mater. Sci. Engineering: A 910, 146899 (2024)10.1016/j.msea.2024.146899 ↗
62. Y. Wang, F. Guo, L. Jiang, H. Yu, G. Wang, C. Shen et al., The role of grain and twin boundaries on discontinuous precipitation of Mg17Al12 phase in Mg-Al alloy. J. Magnes. Alloys 13, 2855–2865 (2024)10.1016/j.jma.2024.11.007 ↗
63. W. Suprapto, P.H. Setyarini, Effect of lead elimination by adding nickel to brass on mechanical properties through a permanent casting process. EUREKA: Phys. Eng. 2025(3), 192–206 (2025)10.21303/2461-4262.2025.003477 ↗
64. G. Purdy, Y. Brechet, A solute drag treatment of the effects of alloying elements on the rate of the proeutectoid ferrite transformation in steels. Acta Metall. Mater. 43(10), 3763–3774 (1995)10.1016/0956-7151(95)90160-4 ↗
65. D. Lahaie, J. Embury, F. Zok, Damage accumulation and mechanical properties of particle-reinforced metal–matrix composites during hydrostatic extrusion. Compos. Sci. Technol. 64(10–11), 1539–1549 (2004)10.1016/j.compscitech.2003.11.006 ↗
66. H. Aghajani, S. Behrangi, Plasma Nitriding of Steels (Springer, 2017)10.1007/978-3-319-43068-3 ↗
67. H. Shi, C. Xu, X. Hu, W. Gan, K. Wu, X. Wang, Improving the Young’s modulus of Mg via alloying and compositing–a short review. J. magnesium alloys. 10(8), 2009–2024 (2022)10.1016/j.jma.2022.07.011 ↗
68. J. Peng, S. Xie, J. Xia, X. Wang, Z. Ni, P. Wang, N. Chen, Effect of the activator B (OCH3) 3 on the microstructure and mechanical properties of Cu-Mn-Al alloy coating via CMT cladding. Crystals. 15(10), 881 (2025)10.3390/cryst15100881 ↗
69. E. Arthur, E. Ampaw, M.Z. Kana, K. Akinluwade, A. Adetunji, O. Adewoye, W. Soboyejo, Indentation size effects in pack carbo-nitrided AISI 8620 steels. Mater. Sci. Engineering: A 644, 347–357 (2015)10.1016/j.msea.2015.07.040 ↗
70. S.K. Yadav, S. Shao, J. Wang, X.-Y. Liu, Structural modifications due to interface chemistry at metal-nitride interfaces. Sci. Rep. 5(1), 17380 (2015)10.1038/srep17380 ↗
71. Y. Ma, M. Yang, F. Yuan, X. Wu, A review on heterogeneous nanostructures: a strategy for superior mechanical properties in metals. Metals. 9(5), 598 (2019)10.3390/met9050598 ↗
72. E. Wołowiec-Korecka, J. Michalski, B. Januszewicz, The stability of the layer nitrided in low-pressure nitriding process. Coatings. 13(2), 257 (2023)10.3390/coatings13020257 ↗
73. B. Larisch, U. Brusky, H.-J. Spies, Plasma nitriding of stainless steels at low temperatures. Surf. Coat. Technol. 116, 205–211 (1999)10.1016/S0257-8972(99)00084-5 ↗
74. X. Meng, W. Wang, Y. Xie, N. Wang, X. Ma, J. Dong et al., Microstructural modification and stress corrosion mechanisms of in-situ rolling friction stir welding joints. Mater. Charact. 231, 115884 (2025)10.1016/j.matchar.2025.115884 ↗
75. W. Wang, Z. Li, M. Han, Y. Zhang, W. Mu, N. Wang et al., CALPHAD-guided design of corrosion-resistant cobalt-based high-entropy alloys with strength-ductility synergy achieved through V, Nb, and Ta alloying. Intermetallics. 191, 109158 (2026)10.1016/j.intermet.2026.109158 ↗
76. D. Guo, R. Jin, B. Shi, X. Jia, S. Wang, B. Xu, Interaction of nanostructured Lu2Si2O7/Lu2SiO5 double-ceramic layer environmental barrier coatings with CMAS. Surf. Coat. Technol. 502, 131994 (2025)10.1016/j.surfcoat.2025.131994 ↗
77. X. Liu, Z. Ma, C. Yang, X. Li, J. Yang, H. Ren, H. Ma, First-principles analysis of effects of cerium doping on electrochemical corrosion behaviors of steel. J. Rare. Earths. 43, 1758–1768 (2025)10.1016/j.jre.2025.04.027 ↗
78. M. Zhang, J. Wang, L. Peng, W. Yang, T. Zhao, B. Chen et al., A novel eco-friendly and bifunctional ionic liquid with superior corrosion and microbial inhibition for L245 steel in CO₂-saturated oilfield environment. Prog. Org. Coat. 213, 109956 (2026)10.1016/j.porgcoat.2026.109956 ↗
79. S. Cheng, Z. Han, H. Zhao, Y. Li, S. Lu, A novel bifunctional Pt/Ce/WZrOx catalyst for efficient selective oxidation of high-concentration NH3. Chem. Eng. J. 479, 147876 (2024)10.1016/j.cej.2023.147876 ↗
80. W.L. Anggayasti, C. Imashiro, T. Morikura, S. Miyata, A. Funahashi, K. Takemura, Profiling the effect of low frequency mechanical vibration on the metabolic and oxidative stress responses of A431 carcinoma. FEBS Open. Bio 15, 1365–1375 (2025)10.1002/2211-5463.70055 ↗
81. H. Mallikarjuna, W. Caley, N. Richards, The effect of cooling rate on the γ’composition, morphology and corrosion behaviour of IN738LC. Corros. Sci. 149, 37–44 (2019)10.1016/j.corsci.2018.12.036 ↗
82. W. Wang, Q. Chen, C. Zhou, Z. Li, N. Wang, Z. Weng et al., An investigation of mechanical, corrosion and high-temperature oxidation behaviors on designed Ti-based entropic alloys. J. Mater. Res. Technol. 40, 1500–1517 (2025)10.1016/j.jmrt.2025.12.182 ↗
83. Z. Li, J. Gou, J. Gao, J. Zhu, W. Kou, J. Wang, Microstructural evolution and corrosion resistance of additively manufactured Ti-6Al-4V alloy annular shaped components using multistage heat treatment. Mater. Chem. Phys. 346, 131414 (2025)10.1016/j.matchemphys.2025.131414 ↗
84. M. Wen, J. Han, W. Li, X. Chang, Q. Chu, D. Chen, EMFF-2025: a general neural network potential for energetic materials with C, H, N, and O elements. npj Comput. Mater. 11(1), 333 (2025)10.1038/s41524-025-01809-w ↗
85. Y. Li, C. Deng, D. Xiao, C. Bai, L. Chang, H. Feng et al., Degradation behavior and biological properties of a novel biodegradable zinc alloy biliary stent. Bioactive Mater. 59, 492–511 (2026)10.1016/j.bioactmat.2025.12.022 ↗
86. N. Li, H. Wang, Q. Liu, Z. Hao, D. Xu, X. Chen et al., Review of preparation and key functional properties of micro-arc oxidation coatings on various metal substrates. Coatings. 15(10), 1201 (2025)10.3390/coatings15101201 ↗
87. C. Wang, L. Zhang, C. Chen, K. Dou, J. Zhang, C. Li et al., Sequential construction of stable nitrogen–oxygen compounds using high-throughput quantum mechanical calculations and customized machine learning model. J. Mater. Chem. A 13, 26244–26254 (2025)10.1039/D5TA00267B ↗
88. R.F. Maulana, A. Hardiansyah, A. Hermawan, N.L.W. Septiani, A. Sabarudin, Y.W. Cheng et al., Fabrication and electrochemical performance of polypyrrole/Fe3O4/graphene nanoplatelets-modified glassy carbon electrode for detection of dopamine. J. Chin. Chem. Soc. 72(11), 1290–1304 (2025)10.1002/jccs.70055 ↗
89. A. Kolics, A. Besing, P. Baradlai, R. Haasch, A. Wieckowski, Effect of pH on thickness and ion content of the oxide film on aluminum in NaCl media. J. Electrochem. Soc. 148(7), B251 (2001)10.1149/1.1376118 ↗
90. L.-H. Chiu, C.-Y. Tsai, K.-H. Chen, C.-J. Hu, H. Chang, Effect of coarse second-phase particles on galvanic corrosion of anodized 6061 aluminum alloy coupled with C1100 copper. Int. J. Electrochem. Sci. 10(8), 6572–6585 (2015)10.1016/S1452-3981(23)06743-3 ↗
91. H. Pei, S. Wang, L. Lu, X. He, Z. Wen, D. Wang, Z. Yue, Deformation failure mechanism and damage characterization of hot corrosion on fatigue of Ni-based superalloy. Int. J. Fatigue. 205, 109402 (2025)10.1016/j.ijfatigue.2025.109402 ↗
92. P. Zhang, X. Yue, S. Wang, Y. Sun, H. Zhou, J. Zhang, Characterization of surface integrity of 7075-T6 aluminum alloy subjected to microbiologically induced corrosion during high-speed machining. J. Alloys Compd. 1008, 176843 (2024)10.1016/j.jallcom.2024.176843 ↗
93. Z. Ling, W. Yang, X. Wang, Y. Zhang, J. Jiang, X. Chen et al., Enhanced corrosion resistance of laser-remelted Fe-Cr-B-Mo alloy through interfacial periodic layered structures in liquid aluminum. J. Mater. Res. Technol. 37, 4717–4731 (2025)10.1016/j.jmrt.2025.07.096 ↗
94. L. Huang, M. Jiang, Z. Yuan, Q. Wang, Y. Tu, Y. Li et al., Effect of bending deformation on the corrosion behavior of AA4343/AA3xxx/AA4343 multilayer aluminium sheets. Vacuum 244, 114849 (2025)10.1016/j.vacuum.2025.114849 ↗
95. Z. Yuan, Y. Lu, Y. Tu, T. Yuan, X. Wang, Z. Ni et al., Microstructure and corrosion behavior of Al-Cu intermetallics in laminated sheets. Intermetallics. 187, 109022 (2025)10.1016/j.intermet.2025.109022 ↗
96. Z. Ling, W. Yang, W. Chen, Z. Fu, Recent advances in understanding the corrosive effects of molten aluminum on structural materials and protective strategies: a comprehensive review. Mater. Today. Commun. 47, 113249 (2025)10.1016/j.mtcomm.2025.113249 ↗
97. L. Hultman, Thermal stability of nitride thin films. Vacuum. 57(1), 1–30 (2000)10.1016/S0042-207X(00)00143-3 ↗
98. D. Höche, C. Blawert, M. Cavellier, D. Busardo, T. Gloriant, Magnesium nitride phase formation by means of ion beam implantation technique. Appl. Surf. Sci. 257(13), 5626–5633 (2011)10.1016/j.apsusc.2011.01.061 ↗