Enhancement of hardness and wear resistance of M2 high-speed steel via circular oscillating laser deposition
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. H. Ma, P. Wang, Q.T. Guo, J.Y. He, K.X. Luo, N. Wu, F.H. Luo, Effect of MoS2 addition on the wear mechanism of laser cladding AISI M2 coatings. J. Mater. Res. Technol-JMRT 33, 5565–5575 (2024). https://doi.org/10.1016/j.jmrt.2024.10.21010.1016/j.jmrt.2024.10.210 ↗
2. S. Vakili, A. Akbari, R. Mohammadzadeh, Corrosion resistance of plasma nitrided AISI M2 high speed steel, prot. Met. Phys. Chem. Surf. 51, 630–636 (2015). https://doi.org/10.1134/S207020511504033410.1134/S2070205115040334 ↗
3. Y. Wei, S. Qi, Y. Wang, X. Chu, Z. Sun, J. Wang, L. Zhang, W. Jia, X. Yang, S. Liu, Microstructural evolution and tribological properties of M2 high-speed steel fabricated under various selective electron beam melting processing parameters. Tribol. Int. 187, 108749 (2023). https://doi.org/10.1016/j.triboint.2023.10874910.1016/j.triboint.2023.108749 ↗
4. F. Deirmina, N. Peghini, B. AlMangour, D. Grzesiak, M. Pellizzari, Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing. Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 753, 109–121 (2019). https://doi.org/10.1016/j.msea.2019.03.02710.1016/j.msea.2019.03.027 ↗
5. M. Yang, Y.S. Zhang, H.X. You, R. Smith, R.D. Sisson, Hardening of selective laser melted M2 steel. J. Mater. Eng. Perform. 33, 4278–4286 (2024). https://doi.org/10.1007/s11665-024-09199-810.1007/s11665-024-09199-8 ↗
6. Y. Zhang, X. Xu, Predictions of the total crack length in solidification cracking through LSBoost. Metall. Mater. Trans. A 52, 985–1005 (2021). https://doi.org/10.1007/s11661-020-06130-310.1007/s11661-020-06130-3 ↗
7. K. Wu, K. Li, L.L. Hao, J.L. Tang, X.M. Jin, J. Yang, Effects of shot peening intensity and coverage on the fatigue life and fracture characteristics of DZ125 alloy at room and high temperatures. Eng. Fail. Anal. (2025). https://doi.org/10.1016/j.engfailanal.2024.10895510.1016/j.engfailanal.2024.108955 ↗
8. G.E. Totten, K. Funatani, L. Xie, Handbook of metallurgical process design, CRC press (2004)10.1201/9780203970928 ↗
9. H. Dong, S-phase surface engineering of Fe-Cr, Co-Cr and Ni-Cr alloys. Int. Mater. Rev. 55, 65–98 (2010). https://doi.org/10.1179/095066009X1257253017058910.1179/095066009X12572530170589 ↗
10. C.N. Egwim, H. Alaka, L.O. Toriola-Coker, H. Balogun, F. Sunmola, Applied artificial intelligence for predicting construction projects delay. Mach. Learn. Appl. 6, 100166 (2021). https://doi.org/10.1016/j.mlwa.2021.10016610.1016/j.mlwa.2021.100166 ↗
11. Y. Zhang, X. Xu, Machine learning cutting force, surface roughness, and tool life in high speed turning processes. Manuf. Lett. 29, 84–89 (2021). https://doi.org/10.1016/j.mfglet.2021.07.00510.1016/j.mfglet.2021.07.005 ↗
12. G. Telasang, J. Dutta Majumdar, G. Padmanabham, I. Manna, Wear and corrosion behavior of laser surface engineered AISI H13 hot working tool steel. Surf. Coat. Technol. 261, 69–78 (2015). https://doi.org/10.1016/j.surfcoat.2014.11.05810.1016/j.surfcoat.2014.11.058 ↗
13. G. Telasang, J. Dutta Majumdar, G. Padmanabham, M. Tak, I. Manna, Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel. Surf. Coat. Technol. 258, 1108–1118 (2014). https://doi.org/10.1016/j.surfcoat.2014.07.02310.1016/j.surfcoat.2014.07.023 ↗
14. A. Wakai, J. Bustillos, N. Sargent, J.L. Stokes, W. Xiong, T.M. Smith, A. Moridi, Harnessing metastability for grain size control in multiprincipal element alloys during additive manufacturing. Nat. Commun. 16, 1446 (2025). https://doi.org/10.1038/s41467-025-56616-010.1038/s41467-025-56616-0 ↗
15. Y.B. Mu, Y.Q. Chu, L.Y.M. Pan, B.K. Wu, L.F. Zou, J.F. He, M.S. Han, T.S. Zhao, L. Zeng, 3D printing critical materials for rechargeable batteries: from materials, design and optimization strategies to applications. Int. J. Extrem. Manuf. (2023). https://doi.org/10.1088/2631-7990/acf17210.1088/2631-7990/acf172 ↗
16. G. Liu, X.F. Zhang, X.L. Chen, Y.H. He, L.Z. Cheng, M.K. Huo, J.A. Yin, F.Q. Hao, S.Y. Chen, P.Y. Wang, S.H. Yi, L. Wan, Z.Y. Mao, Z. Chen, X. Wang, Z.W.B. Cao, J. Lu, Additive manufacturing of structural materials. Mater. Sci. Eng. R-Rep 145, 2021 (2021). https://doi.org/10.1016/j.mser.2020.10059610.1016/j.mser.2020.100596 ↗
17. K.D. Traxel, A. Bandyopadhyay, Naturally architected microstructures in structural materials via additive manufacturing. Additive Manuf. (2020). https://doi.org/10.1016/j.addma.2020.10124310.1016/j.addma.2020.101243 ↗
18. B. Al-Mangour, Additive Manufacturing of Emerging Materials (2019)10.1007/978-3-319-91713-9 ↗
19. W.J. Zhang, C.G. Xu, C.C. Li, S. Wu, Advances in ultrasonic-assisted directed energy deposition (DED) for metal additive manufacturing. Crystals 14(2), 0114 (2024). https://doi.org/10.3390/cryst1402011410.3390/cryst14020114 ↗
20. K.P. Davidson, T.P. Le, L.L. Nguyen, J.E.P. Fronda, R. Liu, T.L. Meng, Y.Y. Tay, M. Seita, Localised control of phase formation in a high-carbon low alloy steel by laser powder bed fusion. NPJ Adv. Manuf. 2, 11 (2025). https://doi.org/10.1038/s44334-025-00022-310.1038/s44334-025-00022-3 ↗
21. A. Dutta, A. Weisheit, J.D. Majumdar, Effect of simultaneous heating on oxidation behavior of Niobium added titanium aluminide (Ti-45Al-5Nb-0.5Si) developed by laser direct energy deposition (LDED). Mater. Chem. Phys. (2024). https://doi.org/10.1016/j.matchemphys.2023.12853110.1016/j.matchemphys.2023.128531 ↗
22. M.U. Ko, J. Cüppers, T. Schopphoven, C. Häfner, Extreme high-speed DED of AISI M2 steel for coating application and additive manufacturing. Coatings (2024). https://doi.org/10.3390/coatings1408095310.3390/coatings14080953 ↗
23. M. Zhang, C.J. Chen, L.L. Qin, K. Yan, G.P. Cheng, H.M. Jing, T. Zou, Laser additive manufacturing of M2 high-speed steel. Mater. Sci. Technol. 34, 69–78 (2018). https://doi.org/10.1080/02670836.2017.135558410.1080/02670836.2017.1355584 ↗
24. J. Dutta Majumdar, I. Manna, Laser processing of materials. Sadhana 28, 495–562 (2003). https://doi.org/10.1007/BF0270644610.1007/BF02706446 ↗
25. M.X. Wei, S.Q. Wang, L. Wang, X.H. Cui, K.M. Chen, Selection of heat treatment process and wear mechanism of high wear resistant cast hot-forging die steel. J. Iron Steel Res. Int. 19, 50–57 (2012). https://doi.org/10.1016/S1006-706X(12)60099-510.1016/S1006-706X(12)60099-5 ↗
26. M. Pellizzari, B. AlMangour, M. Benedetti, S. Furlani, D. Grzesiak, F. Deirmina, Effects of building direction and defect sensitivity on the fatigue behavior of additively manufactured H13 tool steel. Theor. Appl. Fract. Mech. (2020). https://doi.org/10.1016/j.tafmec.2020.10263410.1016/j.tafmec.2020.102634 ↗
27. J. Liang, Y. Liu, J. Li, Y. Zhou, X. Sun, Epitaxial growth and oxidation behavior of an overlay coating on a Ni-base single-crystal superalloy by laser cladding. J. Mater. Sci. Technol. 35, 344–350 (2019). https://doi.org/10.1016/j.jmst.2018.10.01110.1016/j.jmst.2018.10.011 ↗
28. M. Kumar, M. Das, J.D. Majumdar, I. Manna, Development of graded composition and microstructure on Inconel 718 by laser surface alloying with Si, Al and ZrB2 for improvement in high temperature oxidation resistance. Surf. Coat. Technol. 402, 126345 (2020). https://doi.org/10.1016/j.surfcoat.2020.12634510.1016/j.surfcoat.2020.126345 ↗
29. Y.X. Guo, Q.B. Liu, MoFeCrTiWAlNb refractory high-entropy alloy coating fabricated by rectangular-spot laser cladding. Intermetallics 102, 78–87 (2018). https://doi.org/10.1016/j.intermet.2018.09.00510.1016/j.intermet.2018.09.005 ↗
30. J.B. Lei, J.C. Xie, S.F. Zhou, H.Y. Song, X. Song, X. Zhou, Comparative study on microstructure and corrosion performance of 316 stainless steel prepared by laser melting deposition with ring-shaped beam and Gaussian beam. Opt. Laser Technol. 111, 271–283 (2019). https://doi.org/10.1016/j.optlastec.2018.09.05710.1016/j.optlastec.2018.09.057 ↗
31. K.D. Hao, M. Gao, Effect of beam oscillating behavior on pore Inhibition and microstructure evolution mechanisms of laser welded Q235 steel. J. Mater. Res. Technol-JMRT. 11, 1816–1827 (2021). https://doi.org/10.1016/j.jmrt.2021.02.03310.1016/j.jmrt.2021.02.033 ↗
32. S.K. Dinda, J.M. Warnett, M.A. Williams, G.G. Roy, P. Srirangam, 3D imaging and quantification of porosity in electron beam welded dissimilar steel to Fe-Al alloy joints by x-ray tomography. Mater. Des. 96, 224–231 (2016). https://doi.org/10.1016/j.matdes.2016.02.01010.1016/j.matdes.2016.02.010 ↗
33. S.K. Dinda, J. Kar, S. Jana, G.G. Roy, P. Srirangam, Effect of beam oscillation on porosity and intermetallics of electron beam welded DP600-steel to Al 5754-alloy. J. Mater. Process. Technol. 265, 191–200 (2019). https://doi.org/10.1016/j.jmatprotec.2018.10.02610.1016/j.jmatprotec.2018.10.026 ↗
34. D.N. Trushnikov, E.G. Koleva, G.M. Mladenov, V.Y. Belenkiy, Effect of beam deflection oscillations on the weld geometry. J. Mater. Process. Technol. 213, 1623–1634 (2013). https://doi.org/10.1016/j.jmatprotec.2013.03.02810.1016/j.jmatprotec.2013.03.028 ↗
35. B. Jin, X. Xu, Machine learning price index forecasts of flat steel products. Miner. Econ. 38, 97–117 (2025). https://doi.org/10.1007/s13563-024-00457-810.1007/s13563-024-00457-8 ↗
36. B. Jin, E. X.J.I.J.o.E, Xu, Machine learning-based scrap steel price forecasting for the northeast Chinese market (2024)10.1142/S2810943024500112 ↗
37. B.Z. Jin, X.J. Xu, Regional steel price index predictions for the Southwest Chinese market through machine learning. Ironmak. Steelmak. (2024). https://doi.org/10.1177/0301923324129772010.1177/03019233241297720 ↗
38. B.M. Colosimo, M. Grasso, Spatially weighted PCA for monitoring video image data with application to additive manufacturing. J. Qual. Technol. 50, 391–417 (2018). https://doi.org/10.1080/00224065.2018.150756310.1080/00224065.2018.1507563 ↗
39. L. Karlsson, L. Hultman, M.P. Johansson, J.E. Sundgren, H. Ljungcrantz, Growth, microstructure, and mechanical properties of arc evaporated TiCxN1-x (0 ≤ x ≤ 1) films. Surf. Coat. Technol. 126, 1–14 (2000). https://doi.org/10.1016/S0257-8972(00)00518-110.1016/S0257-8972(00)00518-1 ↗
40. W. Darmawan, J. Quesada, F. Rossi, R. Marchal, F. Machi, H. Usuki, Improvement in wear characteristics of the AISI M2 by laser cladding and melting. J. Laser Appl. 21, 176–182 (2009). https://doi.org/10.2351/1.326311910.2351/1.3263119 ↗
41. M. Kumar, J. Dutta Majumdar, I. Manna, Gradation of microstructure, phase aggregate, and mechanical properties with vertical depth of surface alloyed or melted zone synthesized by laser surface alloying or melting of inconel 718. J. Mater. Sci. 60, 1398–1423 (2025). https://doi.org/10.1007/s10853-024-10424-x10.1007/s10853-024-10424-x ↗
42. Y. Fang, X. Chen, H.S. Han, Y.L. Su, J.B. Lei, Y. Feng, Microstructural and wear resistance enhancement of Ti6Al4V alloy via oscillating laser deposition of WC particles. Metals Mater. Int. (2025). https://doi.org/10.1007/s12540-025-01932-910.1007/s12540-025-01932-9 ↗
43. Y. Yang, H. Han, Z. Yan, R. Di, J. Lei, TiC reinforced Ti6Al4V fabricated by circular oscillating laser directed energy deposition: microstructure and wear resistance. Opt. Laser Technol. 181, 112011 (2025). https://doi.org/10.1016/j.optlastec.2024.11201110.1016/j.optlastec.2024.112011 ↗
44. K. Li, S. Chen, T. Wang, G. Zhu, X. Song, J. Lei, Oscillating energy deposition of 17 – 4 PH alloy reinforced with tungsten carbide particles. Ceram. Int. 50, 238–251 (2024). https://doi.org/10.1016/j.ceramint.2023.10.09810.1016/j.ceramint.2023.10.098 ↗
45. J. Xu, Y. Rong, Y. Huang, P. Wang, C. Wang, Keyhole-induced porosity formation during laser welding. J. Mater. Process. Technol. 252, 720–727 (2018). https://doi.org/10.1016/j.jmatprotec.2017.10.03810.1016/j.jmatprotec.2017.10.038 ↗
46. C. Zhang, X. Li, M. Gao, Effects of circular oscillating beam on heat transfer and melt flow of laser melting pool. J. Mater. Res. Technol. 9, 9271–9282 (2020). https://doi.org/10.1016/j.jmrt.2020.06.03010.1016/j.jmrt.2020.06.030 ↗
47. C. Han, P. Jiang, S. Geng, L. Ren, J. Jin, Ultra grain refinement and mechanical properties improvement of all-weld-metal for medium-thick Al-Li alloy via laser beam oscillation and in-situ alloying. Opt. Laser Technol. 168, 109965 (2024). https://doi.org/10.1016/j.optlastec.2023.10996510.1016/j.optlastec.2023.109965 ↗
48. J. Lei, G. Liu, H. Li, H. Han, R. Di, J. Lei, Gaussian and circular oscillating laser directed energy deposition of WC/NiCu composites. Mater. Charact. 204, 113218 (2023). https://doi.org/10.1016/j.matchar.2023.11321810.1016/j.matchar.2023.113218 ↗
49. T. Boeck, Benard-Marangoni convection at large Marangoni numbers: Results of numerical simulations, in: R. Narayanan, T.C.P. Chui (Eds.) Low gravity phenomena and condensed matter experiments in space. Adv. Space Res. pp. 4–10 (2005)10.1016/j.asr.2005.02.083 ↗
50. R.V. Birikh, V.A. Briskman, A.A. Cherepanov, M.G. Velarde, Faraday ripples, parametric resonance, and the Marangoni effect. J. Colloid Interface Sci. 238, 16–23 (2001). https://doi.org/10.1006/jcis.2001.745310.1006/jcis.2001.7453 ↗
51. Y. Xia, J. Lei, H. Chen, Effects of circular oscillating laser on microstructure and mechanical property of nickel-based superalloy by laser melting deposition. Opt. Laser Technol. 155, 108361 (2022). https://doi.org/10.1016/j.optlastec.2022.10836110.1016/j.optlastec.2022.108361 ↗
52. F.T.L. Muniz, M.A.R. Miranda, C.M. dos Santos, J.M. Sasaki, The scherrer equation and the dynamical theory of X-ray diffraction. Acta Crystallogr. Sect. A Found. Adv. 72, 385–390 (2016). https://doi.org/10.1107/S205327331600365X10.1107/S205327331600365X ↗
53. L. Cen, W. Du, M. Gong, Y. Lu, C. Zhang, M. Gao, Effect of high-frequency beam oscillation on microstructures and cracks in laser cladding of Al-Cu-Mg alloys. Surf. Coat. Technol. 447, 128852 (2022). https://doi.org/10.1016/j.surfcoat.2022.12885210.1016/j.surfcoat.2022.128852 ↗
54. G.P. Sun, M.Y. Lei, S. Liu, B. Wen, Orowan strengthening with consideration of thermal activation. Comput. Mater. Sci. (2024). https://doi.org/10.1016/j.commatsci.2023.11272010.1016/j.commatsci.2023.112720 ↗
55. J. Xu, Y. Ding, Y. Gao, H. Wang, Y. Hu, D. Zhang, Grain refinement and crack inhibition of hard-to-weld inconel 738 alloy by altering the scanning strategy during selective laser melting. Mater. Des. 209, 109940 (2021). https://doi.org/10.1016/j.matdes.2021.10994010.1016/j.matdes.2021.109940 ↗
56. F. Zhang, H. Zhang, H. Ma, L. Wang, S. He, H. Jin, F. Yin, Ultra-strong nano-structured high-entropy alcocrfeni alloy films reinforced by Al2O3 addition. J. Mater. Res. Technol-JMRT 33, 1809–1821 (2024). https://doi.org/10.1016/j.jmrt.2024.09.19610.1016/j.jmrt.2024.09.196 ↗
57. X.F. Qin, D.L. Sun, T. Wang, X.G. Zhao, L.Y. Xie, Q. Wu, Hall-petch and inverse Hall-petch effects accompany the long-term use of backup roll material. J. Alloy. Compd. 640, 497–500 (2015). https://doi.org/10.1016/j.jallcom.2015.04.03010.1016/j.jallcom.2015.04.030 ↗
58. V. Popov, Generalized archard law of wear based on Rabinowicz criterion of wear particle, formation. Facta Univ. Ser. Mech. Eng. 17, 39–45 (2019). https://doi.org/10.22190/FUME190112007P10.22190/FUME190112007P ↗
59. N. Shaburova, I. Pashkeev, O. Samoilova, V. Myasoedov, A.O. Moghaddam, Study of the influence of V, mo and Co additives on the carbide formation and microhardness during thermal diffusion Chrome planting of X35CrNi2-3 Steel. Coatings 13 (2023). https://doi.org/10.3390/coatings1301007010.3390/coatings13010070 ↗