Analyzing the anodic reactions for iron surface with a porous Al2O3 cluster with the scanning vibrating electrode
Source abstract
Abstract
The Scanning Vibrating Electrode Technique (SVET) was used to analyze the anodic reactions inside and around a porous Al2O3 cluster embedded onto an iron foil. The tests were carried out at −0.7 V vs. Saturated Calomel Electrode, in naturally aerated solutions of 0.1, 0.2, 0.35, and 0.5 M bicarbonate concentration. During 10 h of testing, the SVET showed evidence for a formation of a passive film in and around the cluster, in the scanning area shown in the graphical abstract. In the dilute 0.1 and 0.2 M solutions, the passive films formed slower than those in 0.35 and 0.5 M solutions. In the SVET maps, the passive films showed that they could suppress dissolution to currents comparable to those of slower dissolution under the porous Al2O3 cluster.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. R. Oltra, V. Maurice, R. Akid, P. Marcus (eds.), Local Probe Techniques for Corrosion Research (Elsevier, Amsterdam, 2014)
2. T. Jin, Y. Cheng, In situ characterization by localized electrochemical impedance spectroscopy of the electrochemical activity of microscopic inclusions in an X100 steel. Corros. Sci. 53, 850–853 (2011)10.1016/j.corsci.2010.11.026 ↗
3. G. Zhang, Y. Cheng, Micro-electrochemical characterization and Mott-Schottky analysis of corrosion of welded X70 pipeline steel in carbonate/bicarbonate solution. Electrochim. Acta 55, 316–324 (2009)10.1016/j.electacta.2009.09.001 ↗
4. Z. Cano, J. Kish, J. McDermid, Effect of surface condition on the localized corrosion behavior of magnesium alloy AZ31B, TMS (The Minerals, Metals & Materials Society) Conference, 201410.1002/9781118888179.ch64 ↗
5. F. Eliyan, Using the Scanning Vibrating Electrode to Relate the Cathodic Activity to the Porosity of Inert Clusters on Iron Surface, Metals and Materials International, (Under Review)
6. W. Li, J. Luo, Electrochemical investigations on formation and pitting susceptibility of passive films on iron and iron-based alloys. Int. J. Electrochem. Sci. 2, 627 (2007)10.1016/S1452-3981(23)17101-X ↗
7. F. Eliyan, A. Alfantazi, Corrosion of the Heat-Affected Zones (HAZs) of API-X100 pipeline steel in dilute bicarbonate solutions at 90 °C—an electrochemical evaluation. Corros. Sci. 74, 297–307 (2013)10.1016/j.corsci.2013.05.003 ↗
8. E. Castro, C. Valentini, C. Moina, J. Vilche, A. Arvia, The influence of ionic composition on the electrodissolution and passivation of iron electrodes in potassium carbonate–bicarbonate solutions in the 8.4–10.5 pH range at 25 °C. Corros. Sci. 26, 781–793 (1986)10.1016/0010-938X(86)90063-6 ↗
9. Z. Lu, C. Huang, D. Huang, W. Yang, Effects of a magnetic field on the anodic dissolution, passivation and transpassivation behaviour of iron in weakly alkaline solutions with or without halides. Corros. Sci. 48, 3049–3077 (2006)10.1016/j.corsci.2005.11.014 ↗
10. G. Williams, H.N. McMurray, Localized corrosion of magnesium in chloride-containing electrolyte studied by a scanning vibrating electrode technique. J. Electrochem. Soc. 155, C340–C349 (2008)10.1149/1.2918900 ↗
11. F. Eliyan, J. Kish, A. Alfantazi, Corrosion of new-generation steel in outer oil pipeline environments. J. Mater. Eng. Perform. 26, 214–220 (2017)10.1007/s11665-016-2404-x ↗
12. D. Davies, G. Burstein, The effects of bicarbonate on the corrosion and passivation of iron. Corrosion 36, 416–422 (1980)10.5006/0010-9312-36.8.416 ↗
13. E. Castro, C. Valentini, C. Moina, J. Vilche, A. Arvia, The influence of ionic composition on the electrodissolution and passivation of iron electrodes in potassium carbonate–bicarbonate solutions in the 8.4–10.5 pH range at 25 °C. Corros. Sci. 26, 791–793 (1986)10.1016/0010-938X(86)90063-6 ↗
14. C. Valentini, C. Moina, The electrochemical behavior of iron in stagnant and stirred potassium carbonate–bicarbonate solutions in the 0–75 °C temperature range. Corros. Sci. 25, 985–997 (1985)10.1016/0010-938X(85)90067-8 ↗
15. E. Castro, J. Vilche, Electrooxidation/electroreduction processes at composite iron hydroxide layers in carbonate–bicarbonate buffers. J. Appl. Electrochem. 21, 543–551 (1991)10.1007/BF01018608 ↗
16. E. Castro, J. Vilche, A. Arvia, Iron dissolution and passivation in K2CO3–KHCO3 solutions. Rotating ring disc electrode and XPS studies. Corros. Sci. 32, 37–50 (1991)10.1016/0010-938X(91)90062-T ↗
17. F. Eliyan, A. Alfantazi, Mechanisms of corrosion and electrochemical significance of metallurgy and environment with corrosion of iron and steel in bicarbonate and carbonate solutions—a review. Corrosion 70, 880–898 (2014)10.5006/1213 ↗
18. G. Burstein, D. Davies, The effects of anions on the behaviour of scratched iron electrodes in aqueous solutions. Corros. Sci. 20, 1143–1155 (1980)10.1016/0010-938X(80)90145-6 ↗
19. S. Simard, M. Drogowska, H. Menard, Electrochemical behavior of 1024 mild steel in slightly alkaline bicarbonate solutions. J. Appl. Electrochem. 27, 317–324 (1997)10.1023/A:1018484814627 ↗
20. D. Brasher, Stability of the oxide film on metals in relation to inhibition of corrosion. II. Dual role of the anion in the mild inhibition of the corrosion of mild steel. Br. Corros. J. 4, 122–128 (1968)10.1179/000705969798325497 ↗
21. C. Rangel, I. Fonseca, R. Leitão, Some aspects of the electrochemical behavior of mild steel in carbonate/bicarbonate solutions. Electrochim. Acta 31, 1659–1662 (1986)10.1016/0013-4686(86)87089-X ↗
22. F. Eliyan, E. Mahdi, A. Alfantazi, Electrochemical evaluation of the corrosion behaviour of API-X100 pipeline steel in aerated bicarbonate solutions. Corros. Sci. 58, 181–191 (2012)10.1016/j.corsci.2012.01.015 ↗
23. F. Eliyan, A. Alfantazi, Investigating the significance of bicarbonate with the corrosion of high-strength steel in CO2-saturated solutions. J. Mater. Eng. Perform. 23, 4082–4088 (2014)10.1007/s11665-014-1200-8 ↗
24. F. Eliyan, A. Alfantazi, Influence of temperature on the corrosion behavior of API-X100 pipeline steel in 1-bar CO2–HCO3 solutions: an electrochemical study. Mater. Chem. Phys. 140, 508–515 (2013)10.1016/j.matchemphys.2013.03.061 ↗