Effect of alumina content on the mechanical properties of alumina-toughened calcia-stabilized tetragonal zirconia ceramic made of baddeleyite
Source abstract
Abstract
Alumina-toughened calcia-stabilized tetragonal zirconia ceramics are produced using baddeleyite as raw material. A 3 wt.% CaO-ZrO2/Al2O3 ceramic containing 15 wt.% Al2O3 is characterized by sufficiently high mechanical properties: a hardness of 12.6 GPa, Young’s modulus of 248 GPa and fracture toughness of 10.3 MPa⋅m0.5. The hardness and Young’s modulus of this ceramic exceed those of alumina-free 3 wt.% CaO-ZrO2 ceramic by about 8.6% and 9.3%, respectively. However, fracture toughness of the prepared composite ceramic is lower than that of 3 wt.% CaO-ZrO2 ceramic by about 13.7%. It is revealed that in the fabricated 3 wt.% CaO-ZrO2/Al2O3 ceramic in the range of used Al2O3 concentrations transformation toughening prevails over residual stress toughening and crack deflection toughening.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A. Maji, G. Choubey, Mater. Today: Proc. (2018). https://doi.org/10.1016/j.matpr.2017.11.41710.1016/j.matpr.2017.11.417 ↗
2. E.T.P. Bergamo, K.B. Cardoso, L.F.O. Lino, T.M.B. Campos, K.N. Monteiro, P.F. Cesar, L.A. Genova, G.P. Thim, P.G. Coelho, E.A. Bonfante, J. Biomed. Mater. Res. Part B Appl. Biomater. (2021). https://doi.org/10.1002/jbm.b.3477610.1002/jbm.b.34776 ↗
3. M.F.R.P. Alves, M.H.F.V. Fernandes, J.K.M.B. Daguano, A.C.D. Rodas, J.E.V. Amarante, C. dos Santos, J. Mech. Behav. Biomed. Mater. (2022). https://doi.org/10.1016/j.jmbbm.2022.10536310.1016/j.jmbbm.2022.105363 ↗
4. E.D.S. Lima, C.C. Gall, M.F.R. Alves, J.B. de Campos, T.M.B. Campos, C.D. Santos, J. Mater. Res. Technol. (2022). https://doi.org/10.1016/j.jmrt.2021.11.14110.1016/j.jmrt.2021.11.141 ↗
5. A. Moradkhani, H. Baharvandi, Eng. Fract. Mech. (2018). https://doi.org/10.1016/j.engfracmech.2017.12.03310.1016/j.engfracmech.2017.12.033 ↗
6. O.S.A. El-Ghany, A.H. Sherief, Future Dent. J. (2016). https://doi.org/10.1016/j.fdj.2016.10.00210.1016/j.fdj.2016.10.002 ↗
7. V.B. Kulmeteva, S.E. Porozova, B.L. Krasnyi, V.P. Tarasovskii, A.B. Krasnyi, Refract. Ind. Ceram. (2009). https://doi.org/10.1007/s11148-010-9233-510.1007/s11148-010-9233-5 ↗
8. J. Xiao, Q. Han, F. Yu, Y. Zhang, H. Wu, X. Li, X. Zeng, P. Dong, Y. Zhang, J. Liu, Alloys Compd. (2018). https://doi.org/10.1016/j.jallcom.2017.10.13010.1016/j.jallcom.2017.10.130 ↗
9. R.C. Hoffmann, M. Kaloumenos, E. Erdem, S. Weber, J.J. Schneider, Eur. J. Inorg. Chem. (2014). https://doi.org/10.1002/ejic.20140263410.1002/ejic.201402634 ↗
10. M. Răileanu, L. Todan, M. Voicescu, N. Drăgan, D. Crişan, M. Maganu, D.M. Vuluga, A. Ianculescu, D.C. Culiţă, Ceram. Int. (2015). https://doi.org/10.1016/j.ceramint.2014.11.12810.1016/j.ceramint.2014.11.128 ↗
11. M.F. Hanafi, N. Sapawe, Mater. Today: Proc. (2019). https://doi.org/10.1016/j.matpr.2019.11.18010.1016/j.matpr.2019.11.180 ↗
12. S. Sonal, B.K. Mishra, Chem. Eng. J. (2021). https://doi.org/10.1016/j.cej.2021.13050910.1016/j.cej.2021.130509 ↗
13. A.O. Zhigachev, A.V. Umrikhin, Y.I. Golovin, B.Y. Farber, Int. J. Appl. Ceram. Technol. (2015). https://doi.org/10.1111/ijac.1237710.1111/ijac.12377 ↗
14. V.V. Rodaev, V.M. Vasyukov, A.O. Zhigachev, V.V. Korenkov, Yu.I. Golovin, Appl. Phys. A (2019). https://doi.org/10.1007/s00339-019-2541-910.1007/s00339-019-2541-9 ↗
15. V.V. Rodaev, A.O. Zhigachev, V.V. Korenkov, Y.I. Golovin, Mater. Sci. Eng. A (2018). https://doi.org/10.1016/j.msea.2018.06.02910.1016/j.msea.2018.06.029 ↗
16. V.V. Rodaev, A.O. Zhigachev, A.I. Tyurin, S.S. Razlivalova, V.V. Korenkov, Yu.I. Golovin, Materials (2021). https://doi.org/10.3390/ma1416467610.3390/ma14164676 ↗
17. K. Matsui, K. Nakamura, M. Saito, A. Kuwabara, H. Yoshida, Y. Ikuhara, Acta Mater. (2022). https://doi.org/10.1016/j.actamat.2022.11765910.1016/j.actamat.2022.117659 ↗
18. D. Tovar-Vargas, E. Roitero, M. Anglada, E. Jimenez-Pique, H. Reveron, J. Eur. Ceram. Soc. (2021). https://doi.org/10.1016/j.jeurceramsoc.2021.05.00610.1016/j.jeurceramsoc.2021.05.006 ↗
19. A.O. Zhigachev, A.V. Umrikhin, V.V. Korenkov, Yu.I. Golovin, J. Am. Ceram. Soc. (2017). https://doi.org/10.1111/jace.1484410.1111/jace.14844 ↗
20. C. Gautam, J. Joyner, A. Gautam, J. Rao, R. Vajtai, Dalton Trans. (2016). https://doi.org/10.1039/C6DT03484E10.1039/C6DT03484E ↗
21. M.F.R.P. Alves, L.Q.B. de Campos, B.G. Simba, C.R.M. da Silva, K. Strecker, C. dos Santos, Ceramics (2022). https://doi.org/10.3390/ceramics504005810.3390/ceramics5040058 ↗
22. W. Zhang, J. Bao, G. Jia, W. Guo, X. Song, S. An, J. Alloys Compd. (2017). https://doi.org/10.1016/j.jallcom.2017.04.05910.1016/j.jallcom.2017.04.059 ↗
23. P. Kohorst, L. Borchers, J. Strempel, M. Stiesch, T. Hassel, F.-W. Bach, C. Hübsch, Acta Biomater. (2012). https://doi.org/10.1016/j.actbio.2011.11.01610.1016/j.actbio.2011.11.016 ↗
24. G.R. Anstis, P. Chantikul, B.R. Lawn, D.B. Marshall, J. Am. Ceram. Soc. (1981). https://doi.org/10.1111/j.1151-2916.1981.tb10320.x10.1111/j.1151-2916.1981.tb10320.x ↗
25. A.C. Fischer-Cripps, Nanoindentation, 3rd edn. (Springer, New York, 2011), p.28210.1007/978-1-4419-9872-9 ↗
26. D. Tang, K.-J. Lee, J. Xu, H.-B. Lim, K. Park, W.-S. Cho, Met. Mater. Int. (2012). https://doi.org/10.1007/s12540-012-3026-y10.1007/s12540-012-3026-y ↗
27. V. Naglieri, P. Palmero, L. Montanaro, J. Chevalier, Materials (2013). https://doi.org/10.3390/ma605209010.3390/ma6052090 ↗
28. F. Zhang, L.-F. Lin, E.-Z. Wang, Ceram. Int. (2015). https://doi.org/10.1016/j.ceramint.2015.06.08110.1016/j.ceramint.2015.06.081 ↗
29. C. dos Santos, I.F. Coutinho, J.E.V. Amarante, M.F.R.P. Alves, M.M. Coutinho, C.R.M. da Silva, J. Mech. Behav. Biomed. Mater. (2021). https://doi.org/10.1016/j.jmbbm.2021.10437210.1016/j.jmbbm.2021.104372 ↗
30. W.-M. Guo, L.-Y. Zeng, L.-X. Wu, H.-J. Wang, S.-K. Sun, H.-T. Lin, S.-H. Wu, C.-Y. Wang, J. Am. Ceram. Soc. (2017). https://doi.org/10.1111/jace.1537910.1111/jace.15379 ↗
31. J. Lee, H. Jeon, D.G. Oh, J. Szanyi, J.H. Kwak, Appl. Catal. A Gen. (2015). https://doi.org/10.1016/j.apcata.2015.03.04010.1016/j.apcata.2015.03.040 ↗
32. S.-Y. Yang, J.-H. Lee, J.-J. Kim, J.-S. Lee, Solid State Ion. (2004). https://doi.org/10.1016/j.ssi.2004.03.02610.1016/j.ssi.2004.03.026 ↗
33. E. Sato, H. Morioka, K. Kuribayashi, D. Sundararaman, J. Mater. Sci. (1999). https://doi.org/10.1023/A:100469330661510.1023/A:1004693306615 ↗
34. M. Trunec, Ceram. Silikáty 52, 165 (2008)
35. M. Zhang, Y. Peng, Y. Sun, P. Li, J. Yu, Fuel (2013). https://doi.org/10.1016/j.fuel.2013.03.07810.1016/j.fuel.2013.03.078 ↗
36. J. Chevalier, L. Gremillard, A.V. Virkar, D.R. Clarke, J. Am. Ceram. Soc. (2009). https://doi.org/10.1111/j.1551-2916.2009.03278.x10.1111/j.1551-2916.2009.03278.x ↗
37. J.R. Kelly, I. Denry, Dent. Mater. (2008). https://doi.org/10.1016/j.dental.2007.05.00510.1016/j.dental.2007.05.005 ↗
38. A. Łabuz, R. Lach, M. Rączka, B. Wójtowicz, W. Pyda, J. Eur. Ceram. Soc. (2015). https://doi.org/10.1016/j.jeurceramsoc.2015.06.02210.1016/j.jeurceramsoc.2015.06.022 ↗
39. Y. Yu, X. Liu, Y. Yuan, W. Yu, H. Yin, Z. Yin, Y. Zheng, X. He, J. Mater. Res. Technol. (2022). https://doi.org/10.1016/j.jmrt.2021.12.05710.1016/j.jmrt.2021.12.057 ↗