Accelerated Life Test and Prediction of Electromigration in Aluminum Interconnects Coupling Multiphysics Full Coupled Model With Optimized Atomic Flux Divergence Simulation

With the miniaturization and high-power requirements of microelectronic devices, the current density carried by interconnects in packaging structures continually increases and reaches the threshold of electromigration (EM) failure. In this study, we investigated the microstructure evolution and void formation in aluminum (Al) interconnects during EM at three different current densities (1/3/5 MA/cm²) and proposed a method coupling the fully coupled theory with an optimized atomic flux divergence method. The results show as follows. First, for the interconnects in integrated circuits, current density is the main factor affecting the EM lifetime of the interconnects in a certain temperature range. With the gradual increase of current density, the contribution of thermal transfer on EM cannot be ignored. The atomic concentration gradient and stress gradient can inhibit EM failure. Second, the increase of length and the decrease of width of interconnect will lead to the increase of atomic flux inside the structure, resulting in the accumulation of voids and atoms. Third, the structure is dynamically reconstructed after deleting the atoms below the failure threshold and the simulation results agree well with the experimental results. Compared with the traditional atomic flux divergence method, the improved atomic flux divergence method based on the fully coupled theory can better fit the change trend of atomic concentration after interconnect failure, and the failure time error is reduced by about 10%.