Characterization of Ultrasonic Wire Bonding for LDS MID Prototyping
Source abstract
Abstract
Functional prototyping during development of new molded interconnect device (MID) products offers benefits such as evaluation of design specifications, validation of manufacturing technologies, and functional testing of the entire product. Introduction of ProtoPaint laser direct structuring (LDS) by LPKF Laser and Electronics AG has opened new possibilities to develop MID prototypes using LDS of additive manufactured plastic parts. In this experimental work, selective laser sintered (SLS) substrates of three different plastic materials-polyether ether ketone, PA12, and Duraform HST-are used to manufacture MID prototypes. These SLS substrates are functionalized by coating with ProtoPaint LDS lacquer, to produce laser-activable surface, followed by subsequent laser activation and electroless chemical plating processes to metallize conductive patterns. The compatibility of this LDS metallization on the MID prototypes toward aluminum wire bonding as a common contacting technology is evaluated. Pretreatment procedures-namely, ultrasonic cleaning in isopropanol solution, ultrasonic cleaning in ethanol solution, plasma treatment using H2 and N2, and coating with 1k plastic primer, 1k plastic filler, and 2k primer filler-are adopted for the blank SLS plastic substrates to further study and improve the coating of ProtoPaint functional layer, which attributes to better metallization of substrates.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D IC and TSV technologies · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. DuraForm® HST Composite · 2008
2. 10.3139/978344643064810.3139/9783446430648 ↗
3. ProtoPaint LDS—Process Description · 2013
4. LDS-MID Design Guide · 2010
5. Factors influencing wire bonding to MID LDS substrates
6. 10.1016/j.microrel.2004.06.00810.1016/j.microrel.2004.06.008 ↗
7. 10.1016/j.phpro.2010.08.08410.1016/j.phpro.2010.08.084 ↗
8. 10.3139/978156990552410.3139/9781569905524 ↗
9. gebhardt · Generative Fertigungsverfahren Rapid Prototyping - Rapid Tooling - Rapid Manufacturing · 2007
10. goth · Protyping for 3D MIDs · 0
11. EOS PEEK HP3—Material Datasheet · 2010
12. goth · Analyse und Optimierung der Entwicklung und Zuverlässigkeit räumlicher Schaltungsträger · 2013
13. Laser supported activation and additive metallization of thermoplastics for 3D-MIDs
14. Process chains for the manufacturing of moulded interconnect devices10.1007/s00170-008-1660-9 ↗
15. Product Information EOSINT P/ PA2200-Pulver’—PA2200 Datasheet · 0