Substrate temperature dependent physical properties of SnS1−xSex thin films
Source abstract
Abstract
Recently, researchers showed great interest on SnS1−xSex alloy films because of their tunable physical properties that are suitable as an absorber layer in thin film solar cells. In the present work, SnS1−xSex thin films were deposited by thermal co-evaporation of SnS and Se at different substrate temperatures ranging from 200 to 350 °C. The influence of substrate temperature (Ts) on composition, structure, surface morphology, topography and optical properties of as-deposited films was investigated using appropriate techniques and the results are reported in detail. The EDS analysis of SnS1−xSex films showed that Sn/(S + Se) ratio was changed from 0.84 to 1.16 with increase of substrate temperature. All the films were polycrystalline in nature, exhibiting (111) plane as preferred orientation with orthorhombic crystal structure. From W–H analysis, the crystallite size and lattice strain in the films were evaluated, where the crystallite size varied in the range, 9–22 nm with substrate temperature. The layers showed a change in the shape of grains with the rise of substrate temperature, where the grain size has increased with Ts. The topographical results indicated an indirect relation between surface roughness and average grain size with change in substrate temperature. The band gap energy values of the films was decreased with increase of Ts and varied in the range, 1.59–1.46 eV. In addition, the photoconductivity measurements revealed that the as-deposited SnS1−xSex films had bimolecular type recombination (γ ~ 0.5) of photo-generated charge carriers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. A. Basak, A. Mondal, U.P. Singh, Impact of substrate temperature on the structural, optical and electrical properties of thermally evaporated SnS thin films. Mater. Sci. Semicond. Process. 56, 381 (2016)10.1016/j.mssp.2016.09.018 ↗
2. Malkeshakumar Patel, Abhijit Ray, Junction and back contact properties of spray-deposited M/SnS/In2S3/SnO2:F/Glass (M = Cu, Graphite) devices: Considerations to improve photovoltaic performance. J. Electron. Mater. 44, 558 (2015)10.1007/s11664-014-3489-3 ↗
3. B. Ghosh, M. Das, P. Banerjee, S. Das, Fabrication of vacuum-evaporated SnS/CdS heterojunction for PV applications. Sol. Energy Mater. Sol. Cells 92, 1099 (2008)10.1016/j.solmat.2008.03.016 ↗
4. K.S. Urmila, T.A. Namitha, J. Rajani, R.R. Philip, B. Pradeep, Optoelectronic properties and Seebeck coefficient in SnSe thin films. J. Semicond. 37, 093002 (2016)10.1088/1674-4926/37/9/093002 ↗
5. E.B. Salgado, M.T.S. Nair, P.K. Nair, Thin films of n-type SnSe2 produced from chemically deposited p- type SnSe. Thin Solid Films 598, 149 (2016)10.1016/j.tsf.2015.11.075 ↗
6. N.E. Makori, I.A. Amatalo, P.M. Karimi, W.K. Njoroge, Optical and electrical properties of SnSe thin films for solar cell applications. Am. J. Condens. Matter Phys. 4, 87 (2014)
7. T.R. Rana, S.Y. Kim, J.H. Kim, Existence of multiple phases and defect states of SnS absorber and its detrimental effect on efficiency of SnS solar cell. Curr. Appl. Phys. 18, 663 (2018)10.1016/j.cap.2018.03.024 ↗
8. Y. Takano, K. Oyaizu, Fabrication of SnS-MgSnO heterojunction solar cells using vacuum thermal evaporation and sol–gel method. Mater. Lett. 228, 414 (2018)10.1016/j.matlet.2018.06.073 ↗
9. T.M. Razykov, G.S. Boltaev, A. Bosio, B. Ergashev, K.M. Kouchkarov, N.K. Mamarasulov, A.A. Mavlonov, A. Romeo, N. Romeo, O.M. Tursunkulov, R. Yuldoshov, Characterization of SnSe thin films fabricated by chemical molecular beam deposition for use in thin film solar cells. Sol. Energy 159, 834 (2018)10.1016/j.solener.2017.11.053 ↗
10. P. Sinsermsuksakul, L. Sun, S.W. Lee, H.H. Park, S.B. Kim, C. Yang, R.G. Gordon, Overcoming efficiency limitations of SnS-based solar cells. Adv. Energy Mater. 4, 1400496 (2014)10.1002/aenm.201400496 ↗
11. N.E. Makori, I.A. Amatalo, P.M. Karimi, W.K. Njoroge, Characterization of SnSe/CdO: Sn P–N junction for solar cell applications. Int. J. Energy Eng. 5, 1 (2015)
12. W. Shockley, H.J. Queisser, Detailed balance limit of efficiency of p–n junction solar cells. J. Appl. Phys. 32, 510 (1961)10.1063/1.1736034 ↗
13. Y. Wei, D. Zhuang, M. Zhao, W. Zhang, G. Ren, Y. Wu, R. Sun, Q. Gong, L. Zhang, S. Zhan, X. Peng, X. Lyu, Beyond 10% efficient CZTSSe thin film solar cells fabricated by a two-step CdS deposition process. Sol. Energy Mater. Sol. Cells 180, 19 (2018)10.1016/j.solmat.2018.02.002 ↗
14. W. Albers, C. Haas, H. Ober, G.R. Schodder, J.D. Wasscher, Preparation and properties of mixed crystals SnS(1−x)Sex. J. Phys. Chem. Solids 23, 215 (1962)10.1016/0022-3697(62)90004-5 ↗
15. T.H. Patel, R. Vaidya, S.G. Patel, Anisotropic behaviour of semiconducting tin monosulphoselenide single crystals. Bull. Mater. Sci. 26, 569 (2003)10.1007/BF02704317 ↗
16. B. Subramanian, C. Sanjeeviraja, M. Jayachandran, Materials properties of electrodeposited SnS0.5Se0.5 films and characterization of photoelectrochemical solar cells. Mater. Res. Bull. 38, 899 (2003)10.1016/S0025-5408(03)00031-X ↗
17. H. Wei, Y. Su, S. Chen, Y. Lin, Z. Yang, X. Chen, Y. Zhang, Novel SnSxSe1−x nanocrystals with tunable band gap: experimental and first principles calculations. J. Mater. Chem. 21, 12605 (2011)10.1039/c1jm12968f ↗
18. T. Mahalingam, V. Danasekaran, G. Ravi, R. Chandramohan, A. Kathalingam, J.K. Rhee, Role of deposition potential on the optical properties of SnSSe thin;films. ECS Trans. 35, 1 (2011)10.1149/1.3653438 ↗
19. H.S. Im, Y. Myung, Y.J. Cho, C.H. Kim, H.S. Kim, S.H. Back, C.S. Jung, D.M. Jang, Y.R. Lim, J. Park, J.P. Ahn, Facile phase and composition tuned synthesis of tin chalcogenide nanocrystals. RSC Adv. 3, 10349 (2013)10.1039/c3ra40869h ↗
20. V. Dhanasekaran, K. Sundaram, J. Jung, T. Mahalingam, Microstructural properties evaluation of SnSSe alloy films. J. Mater. Sci.: Mater. Electron., 26, 1641 (2015)
21. E. Barrios-Salgado, L.A. Rodriguez-Guadarrama, A.R. Garcia-Angelmo, J.C. Alvarez, M.T.S. Nair, P.K. Nair, Large cubic tin sulphide-tin selenide thin film stacks for energy conversion. Thin Solid Films 615, 415 (2016)10.1016/j.tsf.2016.07.048 ↗
22. H. Ju, M. Kim, D. Park, J. Kim, A strategy for low thermal conductivity and enhanced thermoelectric performance in SnSe: porous SnSe1−xSx nanosheets. Chem. Mater. 29, 3228 (2017)10.1021/acs.chemmater.7b00423 ↗
23. T.T. Ly, G. Duvjir, T. Min, J. Byun, T. Kim, M.M. Saad, N.T.M. Hai, S. Cho, J. Lee, J. Kim, Atomistic study of the alloying behaviour of crystalline SnSe1−xSx. Phys. Chem. Chem. Phys. 19, 21648 (2017)10.1039/C7CP03481D ↗
24. T.R. Asfandiyar, A. Wei, F.H. Li, Y. Sun, C.F. Pan, M.U. Wu, H. Farooq, F. Tang, B. Li, J.F. Li, Li, Thermoelectric SnS and SnS-SnSe solid solutions prepared mechanical alloying and spark plasma sintering: anisotropic thermoelectric properties. Sci. Rep. 7, 1 (2017)10.1038/srep43262 ↗
25. E. Barrios-Salgado, L.A. Rodriguez-Guadarrama, M.L.R. Garcia, L.G. Martinez, M.T.S. Nair, P.K. Nair, Thin film solar cells of cubic structured SnS-SnSe. Phys. Status Solidi A 1700036, 1 (2017)
26. H. Kafashan, M. Azizieh, Z. Balak, Electrochemical synthesis of nanostructured Se-doped SnS: effect of Se-dopant on surface characterizations. Appl. Surf. Sci. 410, 186 (2017)10.1016/j.apsusc.2017.03.062 ↗
27. H. Ju, K. Kim, D. Park, J. Kim, Fabrication of porous SnSeS nanosheets with controlled porosity and their enhanced thermoelectric performance. Chem. Engg. J. 335, 560 (2018)10.1016/j.cej.2017.11.003 ↗
28. A. Ektarawong, B. Alling, Stability of SnSe1−xSx solid solutions revealed by first-principles cluster expansion. J. Phys.: Condens. Matter 30, 29LT01 (2018)10.1088/1361-648X/aacb9c ↗
29. W. Gao, Y. Li, J. Guo, M. Ni, M. Liao, H. Mo, J. Li, Narrow-gap physical vapour deposition synthesis of ultrathin SnS1−xSex (0 ≤ x ≤ 1) two-dimensional alloys with unique polarized Raman spectra and high (opto)electronic properties. Nanoscale 10, 8787 (2018)10.1039/C8NR00856F ↗
30. V. Kumar, D.K. Sharma, K. Sharma, P. Singh, D.K. Dwivedi, Preparation and characterization of screen printed SnS0.5Se0.5 alloy films. J. Mater. Sci.: Mater. Electron. 29, 846 (2018)10.1007/s10854-017-7979-y ↗
31. A. Banotra, N. Padha, Development of SnS0.4Se0.6 ternary alloy on annealing of thermally deposited films. J. Electron. Mater. 47, 1 (2018)10.1007/s11664-018-6710-y ↗
32. H. Kafashan, Comparison the effects of Se and Te inclusion on the physical and electrochemical properties of SnS thin films. Mater. Sci. Semicond. Process. 88, 148 (2018)10.1016/j.mssp.2018.07.038 ↗
33. M. Parlak, C. Ercelebi, The effect of substrate and post-annealing temperature on the structural and optical properties of polycrystalline InSe thin films. Thin Solid Films 322, 334 (1998)10.1016/S0040-6090(97)00929-2 ↗
34. K.T.R. Reddy, Y.V. Subbaiah, T.B.S. Reddy, D. Johnston, I. Forbes, R.W. Miles, Pyrolytic spray deposition of ZnSxSe1−x layers for photovoltaic applications. Thin Solid Films 431–432, 340 (2003)10.1016/S0040-6090(03)00154-8 ↗
35. D. Nithyaprakash, P. Maadeswaran, J. Chankdrasekaran, M. Ramamurthy, Effect of substrate temperature on structural, optical and thermal properties of chemically sprayed ZnS thin films. J. Optoelectron. Adv. Mater. 12, 2069 (2010)
36. Z.Y. Zhong, E.S. Cho, S.J. Kwon, Effect of substrate temperatures on evaporated In2S3 thin film buffer layers for Cu(In, Ga)Se2 solar cells. Thin Solid Films 547, 22 (2013)10.1016/j.tsf.2013.05.071 ↗
37. Y.M. Han, J. Zhao, M. Zhou, X.X. Jiang, H.Q. Leng, L.F. Li, Thermoelectric performance of SnS and SnS–SnSe solid solution. J. Mater. Chem. A 3, 4555 (2015)10.1039/C4TA06955B ↗
38. H. Kafashan, X-ray diffraction line profile analysis of undoped and Se-doped SnS thin films using Scherrer’s, Williamson–Hall and size–strain plot methods. J. Electron. Mater. 48, 1294 (2019)10.1007/s11664-018-6791-7 ↗
39. N. Revathi, P. Pratap, Y.P.V. Subbaiah, K.T. Ramakrishna Reddy, Substrate temperature dependent physical properties of In2S3 films. J. Phys. D: Appl. Phys. 41, 155404 (2008)10.1088/0022-3727/41/15/155404 ↗
40. T. Schnabel, M. Seboui, E. Ahlswede, Band gap tuning of Cu2ZnGeSxSe4-x absorbers for thin-film solar cells. Energies 10, 1813 (2017)10.3390/en10111813 ↗
41. L. Zhao, Y. Di, C. Yan, F. Liu, Z. Cheng, L. Jiang, X. Hao, Y. Lai, J. Li, Insitu growth of SnS absorbing layer by reactive sputtering for thin film solar cells. RSC Adv. 6, 4108 (2016)10.1039/C5RA24144H ↗
42. R.E. Abutbul, E. Segev, L. Zeiri, V. Ezersky, G. Makov, Y. Golan, Synthesis and properties of nanocrystalline π-SnS—a new cubic phase of tin sulphide. RSC Adv. 6, 5848 (2016)10.1039/C5RA23092F ↗
43. J.M. Skelton, L.A. Burton, A.J. Jackson, F. Oba, S.C. Parker, A. Walsh, Lattice dynamics of the tin sulphides SnS2, SnS and Sn2S3: vibrational spectra and thermal transport. Phys. Chem. Chem. Phys. 19, 12452 (2017)10.1039/C7CP01680H ↗
44. M. Steichen, R. Djemour, L. Gutay, J. Guillot, S. Siebentritt, P.J. Dale, Direct synthesis of single-phase p-type SnS by electrodeposition from a dicyanamide ionic liquid at high temperature for thin film solar cells. J. Phys. Chem. C 117, 4383 (2013)10.1021/jp311552g ↗
45. S. Sohila, M. Rajalakshmi, C. Ghosh, A.K. Arora, C. Muthamizhchelvan, Optical and Raman scattering studies on SnS nanoparticles. J. Alloy. Comp. 509, 5843 (2011)10.1016/j.jallcom.2011.02.141 ↗
46. R.E. Abutbul, E. Segev, S. Samuha, L. Zeiri, V. Ezersky, G. Makov, Y. Golan, A new nanocrystalline binary phase: synthesis and properties of cubic tin monoselenide. CrystEngComm 18, 1918 (2016)10.1039/C5CE02437D ↗
47. X. Xu, Q. Song, H. Wang, P. Li, K. Zhang, Y. Wang, K. Yuan, Z. Yang, Y. Ye, L. Dai, In-plane anisotropies of polarized Raman response and electrical conductivity in layered tin selenide. ACS Appl. Mater. Interfaces. 9, 12601 (2017)10.1021/acsami.7b00782 ↗
48. P.A. Fernandes, M.G. Sousa, P.M.P. Salome, J.P. Leitao, A.F. Da Cunha, Thermodynamic pathway for the formation of SnSe and SnSe2 polycrystalline thin films by selenization of metal precursors. CrystEngComm 15, 10278 (2013)10.1039/c3ce41537f ↗
49. T. Sall, B.M. Soucase, M. Mollar, B. Hartitti, M. Fahoume, Chemical spray pyrolysis of β-In2S3 thin films deposited at different temperatures. J. Phys. Chem. Solids 76, 100 (2015)10.1016/j.jpcs.2014.08.007 ↗
50. A. Kassim, H.S. Min, A. Sharif, J. Haron, S. Nagalingam, Chemical bath deposition of SnS thin films: AFM, EDAX and UV-Visible characterization. Oriental J. Chem. 27, 1375 (2011)
51. K. Wysocka, A. Ulatowska-Jarza, J. Bauer, I. Holowacz, B. Savu, G. Stanciu, H. Podbielska, AFM examination of sol-gel matrices doped with photosensitizers. Opt. Appl. 38, 127 (2008)
52. E.S. Gadelmawla, M.M. Koura, T.M.A. Maksoud, I.M. Elewa, H.H. Soliman, Roughness parameters. J. Mater. Proces. Tech. 123, 133 (2002)10.1016/S0924-0136(02)00060-2 ↗
53. S. Mahato, A.K. Kar, The effect of annealing on structural, optical and photosensitive properties of electrodeposited cadmium selenide thin films. J. Sci. Adv. Mater. Devices 2, 165 (2017)10.1016/j.jsamd.2017.04.001 ↗
54. Neetu, M. Zulfequar, Photoconductivity of Se90-xTe10Znx thin films. Indian J. Pure Appl. Phys. 52, 53 (2014)
55. J. Tauc, Optical properties of solids (North-Holland, Amsterdam, 1970), p. 903
56. L. Zhao, Y. Di, C. Yan, F. Liu, Z. Cheng, L. Jiang, X. Hao, Y. Lai, J. Li, In situ growth of SnS absorbing layer by reactive sputtering for thin film solar cells. RSC Adv. 6, 4108 (2016)10.1039/C5RA24144H ↗