Mathematical models and experimental data for HDF based sandwich panels with dual corrugated lightweight core
Source abstract
Abstract
Abstract Light layer honeycomb panels could replace traditional wood materials, if their stiffness and strength properties could be improved. The aim of this research was to design and determine elastic properties of sandwich panels (SPs) based on a dual corrugated HDF core. Stiffness matrix values of elements were determined by a numerical method. The 3D calculation results were compared with those of the homogeneous model. The calculation results were collated with those of experimental investigations. It was demonstrated that the linear elasticity modulus as well as the modulus of rupture of the SPs were comparable with mechanical properties of a particle board with identical thickness, while the SP has a 1/3 lower density. The panel core exhibited significant orthotropic properties. In the xy plane it could be characterized as an auxetic structure. The homogeneous model leads to results similar to those achieved from the 3D model and observed in experimental tests.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Processing · Cellular and Composite Structures · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Poznan University of Life Sciences, Faculty of Wood Technology, Department of Furniture Design, ul. Wojska Polskiego 38/42, 60-627 Poznań, Poland , Phone: +48 61 848 74 75, Fax: +48 61 848 74 74
Cracow University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics, ul. Warszawska 24, 31-155 Kraków, Poland
References (37)
Show source-provided references
1. Aboura, Z., Talbi, N., Allaoui, S., Benzeggagh, M.L. (2004) Elastic behavior of corrugated cardboard: Experiments and modeling. Compos. Struct. 63:53–62.10.1016/S0263-8223(03)00131-4 ↗
2. Banerjee, S., Bhattacharyya, D. (2011) Optimal design of sandwich panels made of wood veneer hollow cores. Compos. Sci. Technol. 71:425–432.10.1016/j.compscitech.2010.12.011 ↗
3. Banerjee, S., Battley, M., Bhattacharyya, D. (2010) Shear strength optimisation of reinforced honeycomb core materials. Mech. Adv. Mater. Struct. 17:542–552.10.1080/15376490903398714 ↗
4. Biancolini, M.E. (2005) Evaluation of equivalent stiffness properties of corrugated board. Compos. Struct. 69:322–328.10.1016/j.compstruct.2004.07.014 ↗
5. Buannic, N., Cartraud, P., Quesnel, T. (2003) Homogenization of corrugated core sandwich panels. Compos. Struct. 59:299–312.10.1016/S0263-8223(02)00246-5 ↗
6. Chen, Z., Yan, N. (2012) Investigation of elastic moduli of Kraft paper honeycomb core sandwich panels. Compos. Part B Eng. 43:2107–2114.10.1016/j.compositesb.2012.03.008 ↗
7. EN 310 (1993) Wood-based panels: Determination of modulus of elasticity in bending and of bending strength.
8. EN 322 (1993) Wood-based panels – Determination of moisture content.
9. Hoffman, O. (1967) The brittle strength of orthotropic materials. J. Compos. Mater. 1:200–206.10.1177/002199836700100210 ↗
10. Hohe, J. (2003) A direct homogenisation approach for determination of the stiffness matrix for microheterogeneous plates with application to sandwich panels. Compos. Part B Eng. 34:615–626.10.1016/S1359-8368(03)00063-5 ↗
11. Hohe, J., Becker, W. (2001) An energetic homogenisation procedure for the elastic properties of general cellular sandwich cores. Compos. Part B Eng. 32:185–197.10.1016/S1359-8368(00)00055-X ↗
12. Jen, Y., Chang, L. (2008) Evaluating bending fatigue strength of aluminum honeycomb sandwich beams using local parameters. Int. J. Fatigue 30:1103–1114.10.1016/j.ijfatigue.2007.08.006 ↗
13. Jones, R.M. Mechanics of composite materials. Taylor & Francis, Philadelphia, 1999.
14. Khan, M.K. (2006) Compressive and lamination strength of honeycomb sandwich panels with strain energy calculation from ASTM standards. Proc. Inst. Mech. Eng. Part G. J. Aerosp. Eng. 220:375–386.10.1243/09544100JAERO76 ↗
15. Kim, H.Y., Hwang, W. (2002) Effect of debonding on natural frequencies and frequency response functions of honeycomb sandwich beams. Compos. Struct. 55:51–62.10.1016/S0263-8223(01)00136-2 ↗
16. Li, J., Hunt, J.F., Gong, S., Cai, Z. (2016) Fatigue behavior of wood-fiber-based tri-axial engineered sandwich composite panels (ESCP). Holzforschung 70:567–575.10.1515/hf-2015-0091 ↗
17. Mamalis, A.G., Spentzas, K.N., Pantelelis, N.G., Manolakosa, D.E., Ioannidisa, M.B. (2008) A new hybrid concept for sandwich structures. Compos Struct. 83:335–340.10.1016/j.compstruct.2007.05.002 ↗
18. Meraghni, F., Desrumaux, F., Benzeggagh, M.L. (1999) Mechanical behaviour of cellular core for structural sandwich panels. Compos. Part A Appl. Sci. Manuf. 30:767–779.10.1016/S1359-835X(98)00182-1 ↗
19. Nemat-Nasser, S., Hori, M. Micromechanics: overall properties of heterogeneous materials. J. D. Achenbach, North Holland, 1993.
20. Petras, A., Sutcliffe, M.P.F. (1999) Failure mode maps for honeycomb sandwich panels. Compos. Struct. 44:237–252.10.1016/S0263-8223(98)00123-8 ↗
21. Petutschnigg, A.J., Koblinger, R., Pristovnik, M., Truskaller, M., Dermouz, H., Zimmer B. (2004) Leichtbauplatten aus Holzwerkstoffen – Teil I: Eckverbindungen. Holz als Roh - und Werkst. 62:405–410.10.1007/s00107-004-0526-6 ↗
22. Sam-Brew, S., Semple, K., Smith, G.D. (2011) Preliminary experiments on the manufacture of hollow core composite panels. For. Prod. J. 61:381–389.10.13073/0015-7473-61.5.381 ↗
23. Schwingshackl, C.W., Aglietti, G.S., Cunningham, P.R. (2006) Determination of honeycomb material properties: existing theories and an alternative dynamic approach. J. Aerosp. Eng. 19:177–183.10.1061/(ASCE)0893-1321(2006)19:3(177) ↗
24. Shalbafan, A., Lüdtke, J., Welling, J., Frühwald, A. (2013) Physiomechanical properties of ultra-lightweight foam core particleboard: different core densities. Holzforschung 67:169–175.10.1515/hf-2012-0058 ↗
25. Smardzewski, J. (2013) Elastic properties of cellular wood panels with hexagonal and auxetic cores. Holzforschung 67:87–92.10.1515/hf-2012-0055 ↗
26. Smardzewski, J., Imirzi, H., Lange, J., Podskarbi, M. (2015a) Assessment method of bench joints made of wood-based composites. Compos. Struct. 123:123–131.10.1016/j.compstruct.2014.12.039 ↗
27. Smardzewski, J., Kamisiński, T., Dziurka, D., Mirski, R., Majewski, A., Flach, A., Pilch, A. (2015b) Sound absorption of wood-based materials. Holzforschung 69:431–439.10.1515/hf-2014-0114 ↗
28. Talbi, N., Batti, A., Ayad, R., Guo, Y.Q. (2009) An analytical homogenization model for finite element modelling of corrugated cardboard. Compos. Struct. 88:280–289.10.1016/j.compstruct.2008.04.008 ↗
29. Tan, X., Chen, X., Conway, P.P., Yan, X.T. (2007) Effects of plies assembling on textile composite cellular structures. Mater. Des. 28:857–870.10.1016/j.matdes.2005.10.016 ↗
30. Tekoglu, C., Onck, P.R. (2005) Size effects in the mechanical behavior of cellular materials. J Mater. Sci. 40:5911–5917.10.1007/s10853-005-5042-5 ↗
31. Tumino, D., Ingrassia, T., Nigrelli, V., Pitarresi, G., Urso Miano, V. (2014) Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation. Frat. Ed. Integrita Strutt. 30:317–326.10.3221/IGF-ESIS.30.39 ↗
32. Voth, C., Yadama, V. (2010) Sustainable lightweight wood-strand panels for building construction. Proc. Int. Conv. Soc. Wood Sci. Technol. United Nations Econ. Comm. Eur. – Timber Comm. October 11–14, 2010, Geneva, Switzerland, pp. 1–7.
33. Wang, B., Yang, M. (2000) Damping of honeycomb sandwich beams. J. Mater. Process. Technol. 105:67–72.10.1016/S0924-0136(00)00564-1 ↗
34. Yin, S., Wu, L., Nutt, S. (2013) Stretch-bend-hybrid hierarchical composite pyramidal lattice cores. Compos. Struct. 98: 153–159.10.1016/j.compstruct.2012.11.004 ↗
35. Yu, S.D., Cleghorn, W.L. (2005) Free flexural vibration analysis of symmetric honeycomb panels. J. Sound. Vib. 284:189–204.10.1016/j.jsv.2004.06.028 ↗
36. Zhu, H.X. (2010) Size-dependent elastic properties of micro- and nano-honeycombs. J. Mech. Phys. Solids. 58:696–709.10.1016/j.jmps.2010.02.009 ↗
37. Zuhri, M.Y.M., Guan, Z.W., Cantwell, W.J. (2014) The mechanical properties of natural fibre based honeycomb core materials. Compos. Part B Eng. 58:1–9.10.1016/j.compositesb.2013.10.016 ↗