Dependence of tribological behavior on substrate microstructure in laser surface textured TA15 titanium alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Tribology and Lubrication Engineering · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Z. Lin, K. Song, X. Yu, A review on wire and arc additive manufacturing of titanium alloy. J. Manuf. Process. 70, 24–45 (2021). https://doi.org/10.1016/j.jmapro.2021.08.01810.1016/j.jmapro.2021.08.018 ↗
2. Z. Liu, P. Li, L. Xiong, T. Liu, L. He, High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy. Mater. Sci. Eng. A 680, 259–269 (2017). https://doi.org/10.1016/j.msea.2016.10.09510.1016/j.msea.2016.10.095 ↗
3. X. Liu, S. Chen, J.K.H. Tsoi, J.P. Matinlinna, Binary titanium alloys as dental implant materials-a review. Regen. Biomater. 4, 315–323 (2017). https://doi.org/10.1093/rb/rbx02710.1093/rb/rbx027 ↗
4. R. Ji, K. Zhu, H. Zhang, H. Luo, J. Mao, Microstructure evolution, mechanical response and strengthening models for TA15 titanium alloy during thermal processes: a brief review. J. Mater. Res. Technol. 28, 1644–1656 (2024). https://doi.org/10.1016/j.jmrt.2023.12.09910.1016/j.jmrt.2023.12.099 ↗
5. Q.J. Sun, X. Xie, Microstructure and mechanical properties of TA15 alloy after thermo-mechanical processing. Mater. Sci. Eng. A 724, 493–501 (2018). https://doi.org/10.1016/j.msea.2018.03.10910.1016/j.msea.2018.03.109 ↗
6. W. Zhong, K. Yu, J. Shi, Y. Shen, P. Li, Lu. Jinzhong, High-temperature oxidation behavior of TA15 aerospace titanium alloy at 500 °C and 800 °C. J. Mater. Res. Technol. 30:3355–66 (2024) https://doi.org/10.1016/j.jmrt.2024.04.072.10.1016/j.jmrt.2024.04.072 ↗
7. H. Lu, Q. Miao, W. Liang, F. Wang, Z. Ding, J. Xia, High-temperature tribological behaviors of a Cr-Si co-alloyed layer on TA15 alloy. Chin. J. Aeronaut. 30, 846–855 (2017). https://doi.org/10.1016/j.cja.2016.10.02010.1016/j.cja.2016.10.020 ↗
8. Y. Lu, Y. Feng, W. Wang, W. Wang, J. Yang, W. Chen et al., Co-construction of microstructure evolution and wear resistance of in-situ TiBw/TA15 composites with network structure. Mater Charact (2024). https://doi.org/10.1016/j.matchar.2023.11347510.1016/j.matchar.2023.113475 ↗
9. H. Bai, L. Zhong, L. Kang, J. Liu, W. Zhuang, Z. Lv et al., A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy. J. Alloys Compd. (2021). https://doi.org/10.1016/j.jallcom.2021.16064510.1016/j.jallcom.2021.160645 ↗
10. Y. Sun, Y. Sun, Y. Huang, S. Gong, M. Sun, M. Liu, Study on developing predicted system model of cutting-edge trajectory for micro-milling process based on tool runout error, chip thickness and force signal. Mech. Syst. Signal Process. (2025). https://doi.org/10.1016/j.ymssp.2025.11241010.1016/j.ymssp.2025.112410 ↗
11. S. Tkachenko, O. Datskevich, L. Kulak, S. Jacobson, H. Engqvist, C. Persson, Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications. J. Mech. Behav. Biomed. Mater. 39, 61–72 (2014). https://doi.org/10.1016/j.jmbbm.2014.07.01110.1016/j.jmbbm.2014.07.011 ↗
12. Y. Chen, T. Cheng, X. Nie, Wear failure behaviour of titanium-based oxide coatings on a titanium alloy under impact and sliding forces. J. Alloys Compd. 578, 336–344 (2013). https://doi.org/10.1016/j.jallcom.2013.05.19910.1016/j.jallcom.2013.05.199 ↗
13. I.Y. Kim, B.J. Choi, Y.J. Kim, Y.Z. Lee, Friction and wear behavior of titanium matrix (TiB+TiC) composites. Wear 271, 1962–1965 (2011). https://doi.org/10.1016/j.wear.2010.12.07210.1016/j.wear.2010.12.072 ↗
14. Z.Y. Zhao, L. Li, P.K. Bai, Y. Jin, L.Y. Wu, J. Li et al., The heat treatment influence on the microstructure and hardness of TC4 titanium alloy manufactured via selective laser melting. Materials (2018). https://doi.org/10.3390/ma1108131810.3390/ma11081318 ↗
15. P. Yadav, K.K. Saxena, Effect of heat-treatment on microstructure and mechanical properties of Ti alloys: an overview. Mater. Today Proc. 26, 2546–2557 (2019). https://doi.org/10.1016/j.matpr.2020.02.54110.1016/j.matpr.2020.02.541 ↗
16. S. Bruschi, R. Bertolini, A. Ghiotti, Coupling machining and heat treatment to enhance the wear behaviour of an additive manufactured Ti6Al4V titanium alloy. Tribol. Int. 116, 58–68 (2017). https://doi.org/10.1016/j.triboint.2017.07.00410.1016/j.triboint.2017.07.004 ↗
17. J. Huang, W. Zhang, W. Fang, Y. Yi, Tribology properties of additively manufactured Ti6Al4V alloy after heat treatment. Tribol. Int. (2023). https://doi.org/10.1016/j.triboint.2023.10848510.1016/j.triboint.2023.108485 ↗
18. B. Zhang, Z.H. Wang, Effects of heat treatment on sliding wear and milling properties of Ti-6Al-4V prepared by selective laser melting. J. Tribol. (2023). https://doi.org/10.1115/1.405622610.1115/1.4056226 ↗
19. L. Yao, Y. He, Z. Wang, B. Peng, G. Li, Y. Liu, Effect of heat treatment on the wear properties of selective laser melted Ti–6Al–4V alloy under different loads. Acta Metall. Sin. (Engl. Lett.). 35, 517–525 (2022). https://doi.org/10.1007/s40195-021-01280-810.1007/s40195-021-01280-8 ↗
20. J. Ju, C. Zhao, M. Kang, J. Li, L. He, C. Wang et al., Effect of heat treatment on microstructure and tribological behavior of Ti–6Al–4V alloys fabricated by selective laser melting. Tribol. Int. (2021). https://doi.org/10.1016/j.triboint.2021.10699610.1016/j.triboint.2021.106996 ↗
21. S.G. Setti, R.N. Rao, Tribological behaviour of near β titanium alloy as a function of α+β solution treatment temperature. Mater. Des. 50, 997–1004 (2013). https://doi.org/10.1016/j.matdes.2013.03.10710.1016/j.matdes.2013.03.107 ↗
22. Y. Yang, C. Zhang, Y. Wang, Y. Dai, J. Luo, Friction and wear performance of titanium alloy against tungsten carbide lubricated with phosphate ester. Tribol. Int. 95, 27–34 (2016). https://doi.org/10.1016/j.triboint.2015.10.03110.1016/j.triboint.2015.10.031 ↗
23. Z.Y. Ren, Y.L. Hu, Y. Tong, Z.H. Cai, J. Liu, H.D. Wang et al., Wear-resistant NbMoTaWTi high entropy alloy coating prepared by laser cladding on TC4 titanium alloy. Tribol. Int. (2023). https://doi.org/10.1016/j.triboint.2023.10836610.1016/j.triboint.2023.108366 ↗
24. L.C. Zhang, L.Y. Chen, L. Wang, Surface modification of titanium and titanium alloys: technologies, developments, and future interests. Adv. Eng. Mater. (2020). https://doi.org/10.1002/adem.20190125810.1002/adem.201901258 ↗
25. D. Gropper, T.J. Harvey, L. Wang, A numerical model for design and optimization of surface textures for tilting pad thrust bearings. Tribol. Int. 119, 190–207 (2018). https://doi.org/10.1016/j.triboint.2017.10.02410.1016/j.triboint.2017.10.024 ↗
26. Y. Shen, L. Wang, L. Li, D. Kong, R. Ma, L. Liu et al., Microstructure evolution of 2205 duplex stainless steel (DSS) and inconel 718 dissimilar welded joints and impact on corrosion and mechanical behavior. Mater. Sci. Eng. A (2025). https://doi.org/10.1016/j.msea.2025.14813610.1016/j.msea.2025.148136 ↗
27. C. Gachot, A. Rosenkranz, S.M. Hsu, H.L. Costa, A critical assessment of surface texturing for friction and wear improvement. Wear 372–373, 21–41 (2017). https://doi.org/10.1016/j.wear.2016.11.02010.1016/j.wear.2016.11.020 ↗
28. M. Scaraggi, F.P. Mezzapesa, G. Carbone, A. Ancona, D. Sorgente, P.M. Lugarà, Minimize friction of lubricated laser-microtextured-surfaces by tuning microholes depth. Tribol. Int. 75, 123–127 (2014). https://doi.org/10.1016/j.triboint.2014.03.01410.1016/j.triboint.2014.03.014 ↗
29. Z. Xu, X. Lv, X. Wang, J. Feng, X. Liu, J. Peng et al., Electrochemically assisted laser surface microtexture preparation and tribological properties research. J. Manuf. Process. 122, 54–64 (2024). https://doi.org/10.1016/j.jmapro.2024.05.06510.1016/j.jmapro.2024.05.065 ↗
30. A. Rosenkranz, L. Reinert, C. Gachot, F. Mücklich, Alignment and wear debris effects between laser-patterned steel surfaces under dry sliding conditions. Wear 318, 49–61 (2014). https://doi.org/10.1016/j.wear.2014.06.01610.1016/j.wear.2014.06.016 ↗
31. T. Tiwari, A. Dvivedi, P. Kumar, Analysis of tribological behavior of dual-textured Ti-6Al-4 V alloy surfaces fabricated using a tool-mimic approach. Tribol. Int. (2023). https://doi.org/10.1016/j.triboint.2023.10852710.1016/j.triboint.2023.108527 ↗
32. S. Yuan, N. Lin, W. Wang, H. Zhang, Z. Liu, Y. Yu et al., Correlation between surface textural parameter and tribological behaviour of four metal materials with laser surface texturing (LST). Appl. Surf. Sci. (2022). https://doi.org/10.1016/j.apsusc.2021.15241010.1016/j.apsusc.2021.152410 ↗
33. X. Lei, N. Lin, S. Yuan, C. Lei, M. Nouri, Z. Liu et al., Combining laser surface texturing and double glow plasma surface chromizing to improve tribological performance of Ti6Al4V alloy. Surf. Coat. Technol. (2024). https://doi.org/10.1016/j.surfcoat.2024.13041810.1016/j.surfcoat.2024.130418 ↗
34. B. Joshi, K. Tripathi, G. Gyawali, S.W. Lee, The effect of laser surface texturing on the tribological performance of different Sialon ceramic phases. Progress in Natural Sci: Mater. Int. 26, 415–421 (2016). https://doi.org/10.1016/j.pnsc.2016.08.00310.1016/j.pnsc.2016.08.003 ↗
35. R. Li, H. Wang, B. He, Z. Li, Y. Zhu, D. Zheng et al., Effect of α texture on the anisotropy of yield strength in Ti–6Al–2Zr–1Mo–1V alloy fabricated by laser directed energy deposition technique. Mater. Sci. Eng. A (2021). https://doi.org/10.1016/j.msea.2021.14177110.1016/j.msea.2021.141771 ↗
36. J. Liu, H. Yang, B. Guo, Y. Han, X. Zhang, X. Li et al., Load-dependent fretting wear behavior in additively and conventionally manufactured TA15 titanium alloy. Wear 588, 206534 (2026). https://doi.org/10.1016/j.wear.2026.20653410.1016/j.wear.2026.206534 ↗
37. C. Greiner, M. Schäfer, Bio-inspired scale-like surface textures and their tribological properties. Bioinspir. Biomim. (2015). https://doi.org/10.1088/1748-3190/10/4/04400110.1088/1748-3190/10/4/044001 ↗
38. X. Li, J. Deng, Y. Lu, L. Zhang, J. Sun, F. Wu, Tribological behavior of ZrO2/WS2 coating surfaces with biomimetic shark-skin structure. Ceram. Int. 45, 21759–21767 (2019). https://doi.org/10.1016/j.ceramint.2019.07.17710.1016/j.ceramint.2019.07.177 ↗
39. A. Gaikwad, J.M. Vázquez-Martínez, J. Salguero, P. Iglesias, Tribological properties of Ti6Al4V titanium textured surfaces created by laser: effect of dimple density. Lubricants (2022). https://doi.org/10.3390/lubricants1007013810.3390/lubricants10070138 ↗
40. N. Perez, M. Alvarez-Vera, J.A. Ortega, J. Perez, C.A. Rodriguez Betancourth, Tribological and microstructural characterization of laser microtextured Ti-6Al-4V ELI alloy evaluated against UHMWPE and PEEK for biomedical applications. Wear (2025). https://doi.org/10.1016/j.wear.2025.20593110.1016/j.wear.2025.205931 ↗
41. C. Formanoir, A. Brulard, S. Vivès, G. Martin, F. Prima, S. Michotte et al., A strategy to improve the work-hardening behavior of Ti–6Al–4V parts produced by additive manufacturing. Mater. Res. Lett. 5, 201–208 (2017). https://doi.org/10.1080/21663831.2016.124568110.1080/21663831.2016.1245681 ↗
42. X. Rao, Y. Ru, F. Guo, Y. Ren, L. Cui, K. Yu, Abnormal strain evolution of austenite upon martensitic transformation in FeNiCo alloy with invar effect: an in situ study. Scr. Mater. (2022). https://doi.org/10.1016/j.scriptamat.2022.11494210.1016/j.scriptamat.2022.114942 ↗
43. I. Lopez-Ferreño, T. Breczewski, I. Ruiz-Larrea, A. Lopez-Echarri, M.L. Nó, J. San Juan, Thermal treatments and transformation behavior of Cu-Al-Be shape memory alloys. J. Alloys Compd. (2013). https://doi.org/10.1016/j.jallcom.2012.02.00610.1016/j.jallcom.2012.02.006 ↗
44. Y. Xiao, L. Lan, S. Gao, B. He, Y. Rong, Mechanism of ultrahigh ductility obtained by globularization of αGB for additive manufacturing Ti–6Al–4V. Mater. Sci. Eng. A (2022). https://doi.org/10.1016/j.msea.2022.14417410.1016/j.msea.2022.144174 ↗
45. Z. Zeng, X. Tian, H. Cheng, X. Zhao, L. Qiu, J. Liao et al., High-speed shearing: an ultra-fast internal energy accumulation method for nucleation of SnZnO in photocatalysis. J. Alloys Compd. (2024). https://doi.org/10.1016/j.jallcom.2024.17561110.1016/j.jallcom.2024.175611 ↗
46. H. Dong, Z. Feng, S. Liang, X. Sun, J. Li, D. Wu et al., Evolution of microstructure, mechanical properties and corrosion behaviors using cooling rate regulation in a novel ZrTi-based alloy. J. Mater. Res. Technol. 9, 3471–3480 (2020). https://doi.org/10.1016/j.jmrt.2020.01.08410.1016/j.jmrt.2020.01.084 ↗
47. D. Li, R. Qin, J. Xu, B. Chen, X. Niu, Effect of heat treatment on AlSi10Mg lattice structure manufactured by selective laser melting: microstructure evolution and compression properties. Mater Charact (2022). https://doi.org/10.1016/j.matchar.2022.11188210.1016/j.matchar.2022.111882 ↗
48. X.S. Yang, S. Sun, T.Y. Zhang, The mechanism of bcc α′ nucleation in single hcp ε laths in the fcc γ → hcp ε → bcc α′ martensitic phase transformation. Acta Mater. 95, 264–273 (2015). https://doi.org/10.1016/j.actamat.2015.05.03410.1016/j.actamat.2015.05.034 ↗
49. J. Liu, C. Chen, Q. Feng, X. Fang, H. Wang, F. Liu et al., Dislocation activities at the martensite phase transformation interface in metastable austenitic stainless steel: an in-situ TEM study. Mater. Sci. Eng. A 703, 236–243 (2017). https://doi.org/10.1016/j.msea.2017.06.10710.1016/j.msea.2017.06.107 ↗
50. C.Y. Wang, C.M. Cepeda-Jiménez, M.T. Pérez-Prado, Dislocation-particle interactions in magnesium alloys. Acta Mater. 194, 190–206 (2020). https://doi.org/10.1016/j.actamat.2020.04.05510.1016/j.actamat.2020.04.055 ↗
51. Y. Liu, S.C.V. Lim, C. Ding, A. Huang, M. Weyland, Unravelling the competitive effect of microstructural features on the fracture toughness and tensile properties of near beta titanium alloys. J. Mater. Sci. Technol. 97, 101–112 (2022). https://doi.org/10.1016/j.jmst.2021.04.03210.1016/j.jmst.2021.04.032 ↗
52. M. Calcagnotto, Y. Adachi, D. Ponge, D. Raabe, Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging. Acta Mater. 59, 658–670 (2011). https://doi.org/10.1016/j.actamat.2010.10.00210.1016/j.actamat.2010.10.002 ↗
53. A. Asabre, A. Kostka, O. Stryzhyboroda, J. Pfetzing-Micklich, U. Hecht, G. Laplanche, Effect of Al, Ti and C additions on Widmanstätten microstructures and mechanical properties of cast Al0.6CoCrFeNi compositionally complex alloys. Mater. Des. (2019). https://doi.org/10.1016/j.matdes.2019.10820110.1016/j.matdes.2019.108201 ↗
54. W. Zheng, B. Luo, Y. Wang, Stress–strain relationship of steel-fibre reinforced reactive powder concrete at elevated temperatures. Mater. Struct./Mater. 48, 2299–2314 (2015). https://doi.org/10.1617/s11527-014-0312-910.1617/s11527-014-0312-9 ↗
55. S. Qu, Y. Yang, P. Yao, L. Li, Y. Sun, D. Chu, Fiber reinforced ceramic matrix composites: from the controlled fabrication to precision machining. Int. J. Extrem. Manuf. (2025). https://doi.org/10.1088/2631-7990/adeee110.1088/2631-7990/adeee1 ↗
56. P. Zhang, Q. Deng, Z. Fu, Z. Shen, X. Li, D. Sun et al., Effect of temperature on the fretting and sliding wear behaviors of M50 bearing steel. Tribol. Int. (2024). https://doi.org/10.1016/j.triboint.2024.10990910.1016/j.triboint.2024.109909 ↗
57. C. Wang, Z. Li, H. Zhao, G. Zhang, T. Ren, Y. Zhang, Enhanced anticorrosion and antiwear properties of Ti–6Al–4V alloys with laser texture and graphene oxide coatings. Tribol. Int. (2020). https://doi.org/10.1016/j.triboint.2020.10647510.1016/j.triboint.2020.106475 ↗
58. Y. Bai, Y. Xi, K. Gao, H. Yang, X. Pang, X. Yang et al., Brittle coating effects on fatigue cracks behavior in Ti alloys. Int. J. Fatigue 125, 432–439 (2019). https://doi.org/10.1016/j.ijfatigue.2019.04.01710.1016/j.ijfatigue.2019.04.017 ↗
59. H. Mughrabi, Microstructural mechanisms of cyclic deformation, fatigue crack initiation and early crack growth. Philos. Trans. R. Soc. Lond. A Math. Phys. Eng. Sci. (2015). https://doi.org/10.1098/rsta.2014.013210.1098/rsta.2014.0132 ↗
60. D.G. Bansal, O.L. Eryilmaz, P.J. Blau, Surface engineering to improve the durability and lubricity of Ti-6Al-4V alloy. Wear 271, 2006–2015 (2011). https://doi.org/10.1016/j.wear.2010.11.02110.1016/j.wear.2010.11.021 ↗
61. S. Qu, L. Li, Y. Yang, Y. Sun, S. Pang, G. Yin et al., Surface roughness and damage evaluation of carbon fiber reinforced silicon carbide composites after laser ablation treatment and subsequent grinding. J. Eur. Ceram. Soc. (2026). https://doi.org/10.1016/j.jeurceramsoc.2025.11808210.1016/j.jeurceramsoc.2025.118082 ↗
62. K. Farokhzadeh, A. Edrisy, Transition between mild and severe wear in titanium alloys. Tribol. Int. 94, 98–111 (2016). https://doi.org/10.1016/j.triboint.2015.08.02010.1016/j.triboint.2015.08.020 ↗
63. B. Lal, A. Dey, M.F. Wani, Effect of frictional heating on mechanically mixed layers during dry sliding contact of Ti-6Al-4V alloys at high temperature in vacuum condition. Surf. Rev. Lett. (2022). https://doi.org/10.1142/S0218625X2250127X10.1142/S0218625X2250127X ↗
64. L. Wang, B. Dong, F. Qiu, R. Geng, Q. Zou, H. Yang et al., Dry sliding friction and wear characterization of in situ TiC/Al-Cu3.7-Mg1.3 nanocomposites with nacre-like structures. J. Mater. Res. Technol. 9, 641–653 (2020). https://doi.org/10.1016/j.jmrt.2019.11.00510.1016/j.jmrt.2019.11.005 ↗
65. X.X. Li, Q.Y. Zhang, Y. Zhou, J.Q. Liu, K.M. Chen, S.Q. Wang, Mild and severe wear of titanium alloys. Tribol. Lett. (2016). https://doi.org/10.1007/s11249-015-0637-810.1007/s11249-015-0637-8 ↗
66. X. Cao, Q. Shi, D. Liu, Z. Feng, Q. Liu, G. Chen, Fabrication of in situ carbon fiber/aluminum composites via friction stir processing: evaluation of microstructural, mechanical and tribological behaviors. Compos. B Eng. 139, 97–105 (2018). https://doi.org/10.1016/j.compositesb.2017.12.00110.1016/j.compositesb.2017.12.001 ↗
67. J.D. Lemm, A.R. Warmuth, S.R. Pearson, P.H. Shipway, The influence of surface hardness on the fretting wear of steel pairs-its role in debris retention in the contact. Tribol. Int. 81, 258–266 (2015). https://doi.org/10.1016/j.triboint.2014.09.00310.1016/j.triboint.2014.09.003 ↗
68. W. Brostow, H.E. Hagg Lobland, M. Narkis, Sliding wear, viscoelasticity, and brittleness of polymers. J. Mater. Res. 21, 2422–2428 (2006). https://doi.org/10.1557/jmr.2006.030010.1557/jmr.2006.0300 ↗
69. W. Brostow, H.E. Hagg Lobland, S. Khoja, Brittleness and toughness of polymers and other materials. Mater. Lett. 159, 478–480 (2015). https://doi.org/10.1016/j.matlet.2015.07.04710.1016/j.matlet.2015.07.047 ↗
70. D. He, S. Zheng, J. Pu, G. Zhang, L. Hu, Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film. Tribol. Int. 82, 20–27 (2015). https://doi.org/10.1016/j.triboint.2014.09.01710.1016/j.triboint.2014.09.017 ↗
71. D. Guo, P. Zhang, Y. Jiang, C. Song, D.Q. Tan, D. Yu, Effects of surface texturing and laminar plasma jet surface hardening on the tribological behaviors of GCr15 bearing steel. Tribol. Int. (2022). https://doi.org/10.1016/j.triboint.2022.10746510.1016/j.triboint.2022.107465 ↗