Interrelationship between lignin-rich dichloromethane extracts of hot water-treated wood fibers and high-density polyethylene (HDPE) in wood plastic composite (WPC) production
Source abstract
Abstract
Abstract Hot water extraction (HWE) partially removes hemicelluloses from wood while leaving the majority of the lignin and cellulose; however, the lignin partially migrates to the inner surfaces of the cell wall where it can be deposited as a layer that is sometimes visible as droplets. This lignin-rich material was isolated via Soxhlet extraction with dichloromethane to investigate its rheological behavior in blends with high-density polyethylene (HDPE), a common material in wood plastic composites (WPCs). Pyrolysis gas-chromatography/mass spectrometry (Py-GC/MS) and electrospray ion mass spectrometry (ESI/MS) confirmed that the isolated material is constituted mainly of low-molecular-weight lignin oligomers. The blends of HDPE/isolated lignin, in varying ratios, were tested by means of dynamic rheology. A “shoulder” was found in plots “shear storage moduli (G′) vs. frequency sweep” and a shift of the terminal zone to lower frequencies was observed. Apparently, this shoulder is caused by the elastic contribution of the interfacial tension between the blend components. The rheology of WPCs produced from HWE wood and HDPE shows a similar shoulder in G′ plots, suggesting that the HDPE/lignin blends are in part responsible for the shape of the G′ curves.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry · Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Biological Systems Engineering Department, Washington State University, Pullman, WA, USA
USDA Forest Service, Pacific Northwest Research Station, Portland, OR, USA
Composite Materials and Engineering Center, Washington State University, Pullman,WA, USA
References (23)
Show source-provided references
1. Bousmina, M. (1999) Rheology of polymer blends: linear model for viscoelastic emulsions. Rheol. Acta 38:73–83.10.1007/s00397005015710.1007/s003970050157 ↗
2. Bousmina, M., Bataille, P., Sapieha, S., Schreiber, P. (1995) Comparing the effect of corona treatment and block copolymer addition on rheological properties of polystyrene/polyethylene blends. J. Rheol. 39:499–517.10.1122/1.55070910.1122/1.550709 ↗
3. Chaffee, T.L. (2011) Potential for enhanced properties of wood products by hot water extraction of low value, undebarked ponderosa pine. Master’s Thesis, State University of New York, Syracuse, NY.
4. Donohoe, B.S., Decker, S.R., Tucker, M.P., Himmel, M.E., Vinzant, T.B. (2008) Visualizing lignin coalescence and migration through maize cell walls following thermochemical pretreatment. Biotechnol. Bioeng. 101:913–925.10.1002/bit.2195910.1002/bit.21959 ↗
5. Eder, A., Carus, M. (2013) Global trends in wood-plastic composites (WPC). Bioplastics Magazine 8:6–7.
6. Elias, L., Fenouillot, F., Majeste, J.C., Cassagnau, Ph. (2007) Morphology and rheology of immiscible polymer blends filled with silica nanoparticles. Polymer 48:6029–6040.10.1016/j.polymer.2007.07.06110.1016/j.polymer.2007.07.061 ↗
7. Goring, D.A.I. (1971) Polymer properties of lignin and lignin derivatives. In: Lignins. Occurrence, Formation, Structure and Reactions. Eds. Sarkanen, K.V., Ludwig, C.H. Wiley-Interscience, New York, NY. pp. 695–798 (ISBN 0-471-75422-6).
8. Irvine, G.M. (1984) The glass transition of lignin and hemicellulose and their measurement by differential thermal analysis. Tappi J. 67:118–121.
9. Klyosov, A. Wood-Plastic Composites. Wiley, Hoboken, NJ, 2007.10.1002/978047016593510.1002/9780470165935 ↗
10. Li, T.Q., Wolcott, M.P. (2005) Rheology of wood plastics melt, Part 1. Capillary rheometry of HDPE filled with maple. Polym. Eng. Sci. 45:549–559.10.1002/pen.20308 ↗
11. Li, J., Henriksson, G., Gellerstedt, G. (2007) Lignin depolymerization/repolymerization and its critical role for delignification of aspen wood by steam explosion. Bioresource Technol. 98:3061–3068.10.1016/j.biortech.2006.10.01810.1016/j.biortech.2006.10.018 ↗
12. Osman, N.B., McDonald, A.G., Laborie, M-P.G. (2012) Analysis of DCM extractable components from hot-pressed hybrid poplar. Holzforschung 66:927–934.10.1515/hf-2012-001110.1515/hf-2012-0011 ↗
13. Ou, R., Xie, Y., Wang, Q., Sui, S., Wolcott, M.P. (2014) Thermal, crystallization, and dynamic rheological behavior of wood particle/HDPE Composites: effect of removal of wood cell wall composition. J. Appl. Polym. Sci. 131:1–8.10.1002/app.40331 ↗
14. Parees, D.M., Hanton, S.D., Clark, P.A.C., Willcox, D.A. (1998) Comparison of mass spectrometric techniques for generating molecular weight information on a class of ethoxylated oligomers. J. Am. Soc. Mass Spectr. 9:282–291.10.1016/S1044-0305(97)00291-210.1016/S1044-0305(97)00291-2 ↗
15. Pelaez-Samaniego, M.R., Yadama, V., Lowell, E., Amidon, T., Chaffee, T.L. (2012) Hot water extracted wood fiber for production of wood plastic composites (WPCs). Holzforschung 67:193–200.10.1515/hf-2012-007110.1515/hf-2012-0071 ↗
16. Pelaez-Samaniego, M.R., Yadama, V., Lowell, E., Espinoza-Herrera, R. (2013) A review of wood thermal pretreatments to improve wood composite properties. Wood Sci. Technol. 47:1285–1319.10.1007/s00226-013-0574-3 ↗
17. Pelaez-Samaniego, M.R., Yadama, V., Garcia-Perez, T., Lowell, E., Amidon, T. (2014a) Effect of hot water extracted hardwood and softwood chips on particleboard properties. Holzforschung 68:807–815.10.1515/hf-2013-015010.1515/hf-2013-0150 ↗
18. Pelaez-Samaniego, M.R., Yadama, V., Garcia-Perez, M., Lowell, E., McDonald, A.G. (2014b) Effect of temperature during wood torrefaction on the formation of lignin liquid intermediates. J Anal. Appl. Pyrol. 109:222–233.10.1016/j.jaap.2014.06.00810.1016/j.jaap.2014.06.008 ↗
19. Salmén, L. (1982) Temperature and water induced softening behaviour of wood fiber based materials, PhD Dissertation, The Royal Institute of Technology, Stockholm, Sweden.
20. Selig, M.J., Viamajala, S., Decker, S.R., Tucker, M.P., Himmel, M.E., Vinzant, T.B. (2007) Deposition of lignin droplets produced during dilute acid pretreatment of maize stems retards enzymatic hydrolysis of cellulose. Biotechnol. Prog. 23:1333–1339.10.1021/bp0702018 ↗
21. Tanahashi, M. (1990) Characterization and degradation mechanisms of wood components by steam explosion and utilization of exploded wood. Wood Res. 77:49–117.
22. Van Oene, H. (1978) Rheology of polymer blends and dispersions. In: Polymer Blends, Vol. 1. Eds. Paul, D.R., Newman, S. Academic Press, New York, NY. pp. 295–352.10.1016/B978-0-12-546801-5.50013-X10.1016/B978-0-12-546801-5.50013-X ↗
23. Wang, Q., Ou, R., Shen, X., Xie, Y. (2013) Plasticizing cell walls as a strategy to produce wood-plastic composites with high wood content by extrusion processes. BioResources 6:3621–3622.10.15376/biores.6.4.3621-3622 ↗