Effects of rapid thermal annealing parameters on crystal ion slicing-fabricated LiTaO3 thin film
Source abstract
Abstract
Crystal ion slicing (CIS) technology has been widely applied to fabricate single-crystalline quality thin film, although the ion implantation process can cause lattice strain and electric properties changes in the fabricated film. In this paper, CIS-fabricated Z-cut LiTaO3 (LT) thin films were annealed under different temperatures and times by rapid thermal annealing (RTA). The effects of annealing parameters on microstructure and dielectric properties of LT films were studied. It is found that the lattice strain can be partially released by RTA according to the XRD diffraction peak shift and this lattice release also has an influence on the permittivity and dielectric loss. Additionally, anomalous recrystallization behavior has been observed in the samples annealed at higher temperature or longer time according to the abnormal grain growth revealed by AFM. Besides, unusual permittivity and dielectric loss increase in sample annealed at 600℃ was measured and it may result from the abnormal grain growth. In summary, it is indicated by the results that RTA is an effective way to release lattice strain and it can impact electric properties of CIS-fabricated LT thin film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Semiconductor materials and devices · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Irzaman, R. Siskandar, N. Nabilah, Aminullah, B. Yuliarto, K.A. Hamam et al., Ferroelectrics 524, 44 (2018)10.1080/00150193.2018.1432842 ↗
2. T. Takai, H. Iwamoto, Y. Takamine, H. Yamazaki, T. Fuyutsume, H. Kyoya et al., IEEE Trans. Ultrason. Ferr. 64, 1382 (2017)10.1109/TUFFC.2017.2738119 ↗
3. L.Q. Li, W.J. Nie, Z.Q. Li, B. Zhang, L. Wang, P. Haro-Gonzalez et al., J. Lightwave. Technol. 37, 3452 (2019)10.1109/JLT.2019.2917076 ↗
4. B.W. Sun, J. Wang, J. Gou, X.C. Liu, Y.D. Jiang, Mater. Res. Express, 6, 026405 (2019)10.1088/2053-1591/aaeabf ↗
5. M. Bruel, Electron. Lett. 31, 1201 (1995)10.1049/el:19950805 ↗
6. M. Bruel, Nucl. Instrum. Meth. B 108, 313 (1996)10.1016/0168-583X(95)01056-4 ↗
7. J.R. Luo, W.B. Luo, K.S. Zhang, X.W. Sun, Y. Shuai, T. Wang, et al. Sens. Actuators A Phys. 300, 111650 (2019)10.1016/j.sna.2019.111650 ↗
8. J.F. Ziegler, M.D. Ziegler, J.P. Biersack, Nucl. Instrum. Methods B 268, 1818 (2010)10.1016/j.nimb.2010.02.091 ↗
9. Y. Yan, K. Huang, H. Zhou, X. Zhao, W. Li, Z. Li et al., ACS Appl. Electron. Mater. 1, 1660 (2019)10.1021/acsaelm.9b00351 ↗
10. J.J. Lin, T.G. You, M. Wang, K. Huang, S.B. Zhang, Q. Jia, et al., Nanotechnology, 29, 504002 (2018)10.1088/1361-6528/aae281 ↗
11. C. Ventosa-Moulet, S.L. Hayashi, M.S. Goorsky, ECS Trans. 33, 249 (2010)10.1149/1.3483514 ↗
12. L.A. Kappers, K.L. Sweeney, L.E. Halliburton, J.H.W. Liaw, Phys Rev B 31, 6792 (1985)10.1103/PhysRevB.31.6792 ↗
13. X.Y. Bai, Y. Shuai, C.G. Gong, C.G. Wu, W.B. Luo, R. Bottger et al., Appl Surf Sci 434, 669 (2018)10.1016/j.apsusc.2017.10.184 ↗
14. R.C. Zhang, B.J. Zhao, K. Huang, T.G. You, Q. Jia, J.J. Lin, et al., Aip Adv. 8, 055323 (2018)10.1063/1.5030776 ↗
15. C.J. Wang, H.J. Tu, R.R. Su, J. Gao, B.V. King, D.J. O'Connor, et al., J. Am. Ceram Soc. 104, 593 (2020)10.1111/jace.17469 ↗
16. L.G. Song, B.Y. Wang, T. Zhu, Y.H. Gong, Q. Xu, L.P. Guo et al., Nucl Instrum Meth B 467, 80 (2020)10.1016/j.nimb.2020.02.009 ↗
17. J. Choi, S.J. An, J. Vac. Sci. Technol. B, 38, 052202 (2020)10.1116/6.0000041 ↗
18. R.N. Aljawfi, A. Vij, K.H. Chae, S. Dalela, P.A. Alvi, M.A. AL-Maghrabi, et al., Appl. Surf. Sci., 445, 287 (2018)10.1016/j.apsusc.2018.03.138 ↗
19. S. Rascuna, P. Badala, C. Tringali, C. Bongiorno, E. Smecca, A. Alberti et al., Mater. Sci. Semicon. Proc. 97, 62 (2019)10.1016/j.mssp.2019.02.031 ↗
20. J.B. Su, H. Yang, Y.B. Ma, R. Li, L.C. Jia, D.P. Liu, et al., Mater. Sci. Semicon. Proc., 113, 105040 (2020)10.1016/j.mssp.2020.105040 ↗
21. K.J. Choi, M. Biegalski, Y.L. Li, A. Sharan, J. Schubert, R. Uecker et al., Science 306, 1005 (2004)10.1126/science.1103218 ↗
22. V. Manglani, A. Agnihotri, AIP Conf. Proc. 1536, 547 (2013)10.1063/1.4810343 ↗
23. C. Moulet, M.S. Goorsky, in Ion Implantation. ed. by M.S. Goorsky (InTech, Rijeka, 2012), p. 65
24. M. Takashige, S. Hamazaki, Y. Takhashi, F. Shimizau, T. Yamaguchi, M.S. Jang et al., Jpn. J. Appl. Phys. 1 39, 5716 (2000)10.1143/JJAP.39.5716 ↗
25. V.M. De Cupere, P.G. Rouxhet, Polymer 43, 5571 (2002)10.1016/S0032-3861(02)00394-4 ↗
26. S.H. Hong, I.R. Hwang, J.S. Choi, J.H. Lee, S.H. Kim, S.H. Jeon et al., J. Korean Phys. Soc. 52, 421 (2008)10.3938/jkps.52.421 ↗
27. M. Schossig, V. Norkus, G. Gerlach, Infrared Phys. Technol. 63, 35 (2014)10.1016/j.infrared.2013.12.005 ↗
28. Q.N. Zhang, X.D. Xia, J. Wang, Y. Su, Int. J. Solids Struct. 144, 32 (2018)10.1016/j.ijsolstr.2018.04.012 ↗
29. H.W. Chen, C.R. Yang, J.H. Zhang, B. Wang, H. Ji, Appl. Surf. Sci. 255, 4585 (2009)10.1016/j.apsusc.2008.12.003 ↗
30. C.F. Tseng, J. Eur. Ceram Soc. 34, 3641 (2014)10.1016/j.jeurceramsoc.2014.06.010 ↗
31. H.Y. Yang, S.R. Zhang, Y.W. Chen, H.C. Yang, Y. Yuan, E.Z. Li, Inorg. Chem. 58, 968 (2019)10.1021/acs.inorgchem.8b03169 ↗