journal article·2022-08

Thermoelectric properties of n-type Bi2Se0.3Te2.7-based alloys with nanoflowers morphology

Fang Wu, Wei Wang

Applied Physics A· Volume 128· Issue 8
Publisher page

Abstract

The n-type Bi2Se0.3Te2.7 nanopowders with nanoflowers morphology have been synthesized successfully by the hydrothermal method through using different amounts of ethylene diamine tetraacetic disodium salt (EDTA) as surfactant. As compared the Bi2Se0.3Te2.7 nanopowders with nanoplates morphology and Y0.2Bi1.8Se0.3Te2.7 nanopowders with nanoflowers morphology were also synthesized. Then, all the nanopowders were hot-pressed to pellets and the thermoelectric properties of the pellets were investigated. The results showed that the power factors of the samples made by the nanoflowers are all larger than that of the Bi2Se0.3Te2.7 bulk made by nanoplates due to their lower electrical resistivities which are caused by the larger grains in the corresponding bulk. In addition, the thermal conductivity of the Bi2Se0.3Te2.7 bulk made by nanoflowers is lower than that of the Bi2Se0.3Te2.7 bulk made by nanoplates due to the tiny grains embedded in the large grains in the bulk. As a result, in the measured temperature, the ZT values of the Bi2Se0.3Te2.7 bulk made by nanoflowers are all higher than that of the zone melt ingots. In the lower temperature, the ZT values of the Y0.2Bi1.8Se0.3Te2.7 sample are all high than 1.1 and reached 1.21 at 413 K which is relatively high value for n-type thermoelectric materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. J. Mao, G. Chen, Z.F. Ren, Thermoelectric cooling materials. Nat. Mater. 20, 454–461 (2021)10.1038/s41563-020-00852-w ↗
2. T. Fang, X. Li, C.L. Hu, Q. Zhang, J. Yang, W.Q. Zhang, X.B. Zhao, D.J. Singh, T.J. Zhu, Complex band structures and lattice dynamics of Bi2Te3-based compounds and solid solutions. Adv. Funct. Mater. 29, 1900677 (2019)10.1002/adfm.201900677 ↗
3. K. V. Selvan, M. N. Hasan, M. S. Mohamed Ali, State-of-the-Art reviews and analyses of emerging research findings and achievements of thermoelectric materials over the past years. J. Electro. Mater. 48, 745–777 (2019).10.1007/s11664-018-06838-4 ↗
4. H.Y. Fang, Y. Wu, Telluride nanowire and nanowire heterostructure based thermoelectric energy harvesting. J. Mater. Chem. A. 2, 6004–6014 (2014)10.1039/C3TA14129B ↗
5. X.F. Wang, M. Lundstrom, Limitations of ZT as a figure of merit for nanostructured thermoelectric materials. J. Appl. Phys. 126, 195703 (2019)10.1063/1.5127175 ↗
6. F. Domínguez-Adamea, M. Martín-Gonzálezb, D. Sánchezc, A. Cantarerod, Nanowires: a route to efficient thermoelectric devices. Phys. E Low Dimens. Syst. Nanostruct. 113, 213–222 (2019)10.1016/j.physe.2019.03.021 ↗
7. Z. Ma, J.T. Wei, P.S. Song, M.L. Zhang, L.L. Yang, J. Ma, W. Liu, F.H. Yang, X.D. Wang, Review of experimental approaches for improving ZT of thermoelectric materials. Mater. Sci. Semicond. Proc. 121, 105303 (2021)10.1016/j.mssp.2020.105303 ↗
8. Y. Ma, R. Heijl, A.E.C. Palmqvist, Composite thermoelectric materials with embedded nanoparticles. J. Mater. Sci. 48, 2767–2778 (2013)10.1007/s10853-012-6976-z ↗
9. F. Wu, Q.L. He, M.S. Tang, H.Z. Song, Thermoelectric properties of Tl and I dual-doped Bi2Te3 based alloys. Int. J. Mod. Phys. B. 32, 1850123 (2018)10.1142/S0217979218501230 ↗
10. D. Baoa, J. Chen, Y. Yub, W.D. Liu, L.S. Huang, G. Han, J. Tang, D.L. Zhou, L. Yang, Z.G. Chen, Texture-dependent thermoelectric properties of nano-structured Bi2Te3. Chem. Eng. J. 388, 124295 (2020)10.1016/j.cej.2020.124295 ↗
11. J. H. Kim, H.Y. Cho, S. Y. Back, J. H.Yun, H. S. Lee, J. S. Rhyee, Lattice distortion and anisotropic thermoelectric properties in hot deformed CuI-doped Bi2Te2.7Se0.3. J. Alloys Compd. 815, 152649 (2020)10.1016/j.jallcom.2019.152649 ↗
12. Q. R. Tao, R. G. Deng, J. J. Li, Li, Y. G. Yan, X. L. Su, P. F. P. Poudeu, X. F. Tang, Enhanced thermoelectric performance of Bi0.46Sb1.54Te3 nanostructured with CdTe. ACS Appl. Mater. Interfaces, 12, 26330–20341(2020)10.1021/acsami.0c03225 ↗
13. L. Hu, T. Zhu, X. Liu, X. Zhao, Point defect engineering of high-performance bismuth-telluride-based thermoelectric materials. Adv. Funct. Mater. 24, 5211–5218 (2015)10.1002/adfm.201400474 ↗
14. Y. Pan, J. F. Li, Thermoelectric performance enhancement in n-type Bi2(TeSe)3 alloys owing to nanoscale inhomogeneity combined with a spark plasma-textured microstructure. NPG Asia Mater. 8, e275 (2016).10.1038/am.2016.67 ↗
15. F. Wu, H.Z. Song, F. Gao, W.Y. Shi, J.F. Jia, X. Hu, Effects of different morphologies of Bi2Te3 nanopowders on thermoelectric properties. J. Electro. Mater. 42, 1140–1145 (2013)10.1007/s11664-013-2541-z ↗
16. F. Wu, W. Wang, Enhanced thermoelectric performance of p-type Bi0.5Sb1.5Te3 nanocomposites through nanoflower morphology. J. Electro. Mater. 51, 508–515 (2022).10.1007/s11664-021-09312-w ↗
17. B. Poudel, Q. Hao, Y. Ma, Y.C. Lan, A. Minnich, B. Yu, X. Yan, D.Z. Wang, A. Muto, D. Vashaee, X.Y. Chen, J.M. Liu, M.S. Dresselhaus, G. Chen, Z.F. Ren, High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys. Science 320, 634 (2008)10.1126/science.1156446 ↗
18. Y. Saberi, S. A. Sajjadi, H. Mansouri, Comparison of thermoelectric properties of Bi2Te3 and Bi2Se0.3Te2.7 thin film materials synthesized by hydrothermal process and thermal evaporation. Ceram. Int. 47, 11547–11559 (2021).10.1016/j.ceramint.2020.12.285 ↗
19. D. Li, X.Y. Qin, Y.C. Dou, X.Y. Li, R.R. Sun, Q.Q. Wang, L.L. Li, H.X. Xin, N. Wang, N.N. Wang, C.J. Song, Y.F. Liu, J. Zhang, Thermoelectric properties of hydrothermally synthesized Bi2Te3−xSex nanocrystals. Scr. Mater. 67, 161–164 (2012)10.1016/j.scriptamat.2012.04.005 ↗
20. Q. Zhang, R.S. Zhai, T. Fang, K.Y. Xia, Y. H. Wu, F. Liu, X. B. Zhao, T. J. Zhu, Low-cost p-type Bi2Te2.7Se0.3 zone-melted thermoelectric materials for solid-state refrigeration. J. Alloys Compd. 831, 154732 (2020).10.1016/j.jallcom.2020.154732 ↗
21. G.J. Snyder, E.S. Toberer, Complex thermoelectric materials. Nat. Mater. 7, 105–114 (2008)10.1038/nmat2090 ↗
22. A. Vasil'Ev, M. Yaprintsev, O. Ivanov, E. Danshina, Anisotropic thermoelectric properties of Bi1.9Lu0.1Te2.7Se0.3 textured via spark plasma sintering. Solid. State. Sci. 84, 28–43(2018).10.1016/j.solidstatesciences.2018.08.004 ↗
23. Y. S. Wudil, M. A. Gondal, S. G. Rao, S. Kunwar, Thermal conductivity of PLD-grown thermoelectric Bi2Te2.7Se0.3 films using temperature-dependent Raman spectroscopy technique. Ceram. Int. 46, 7253–7258 (2020).10.1016/j.ceramint.2019.11.219 ↗
24. H. Cho, J. H. Kim, S. Y. Back, K. Ahn, J. S. Rhyee, S. D. Park, Enhancement of thermoelectric properties in CuI-doped Bi2Te2.7Se0.3 by hot-deformation. J. Alloys Compd. 731, 531–536 (2018).10.1016/j.jallcom.2017.10.016 ↗
25. J. Cho, S. Kim, Y. Kim, H. S. Kim, T. Park, S. W. Kim, Cu nanoparticle-processed n-type Bi2Te2.7Se0.3 alloys for low-temperature thermoelectric power generation. J. Alloys Compd. 884, 16106 (2021).10.1016/j.jallcom.2021.161060 ↗
26. X.L. Shi, X. Ai, Q.H. Zhang, X.F. Lu, S.J. Gu, L. Su, L.J. Wang, W. Jiang, Enhanced thermoelectric properties of hydrothermally synthesized n-type Se & Lu-codoped Bi2Te3. J. Adv. Ceram. 9, 424–431 (2020)10.1007/s40145-020-0382-9 ↗
27. K. C. Park, P. Dharmaiah, H. S. Kim, S. J. Hong, Investigation of microstructure and thermoelectric properties at different positions of large diameter pellets of Bi0.5Sb1.5Te3 compound. J. Alloys Compd. 692, 573–582 (2017).10.1016/j.jallcom.2016.09.106 ↗
28. H. S. Kim, N. A. Heinz, Z. M. Gibbs, Y. Tang, S. D. Kang, G. J. Snyder, High thermoelectric performance in (Bi0.25Sb0.75)2Te3 due to band convergence and improved by carrier concentration control. Mater. Today. 20, 452–459 (2017).10.1016/j.mattod.2017.02.007 ↗
29. J. Li, Y. Wang, Y. Yan, C. Wang, L. Li, Pressure effect on the electronic structure and thermoelectric properties of alpha-MgAgSb. Comput. Mater. Sci. 155, 450–456 (2018)10.1016/j.commatsci.2018.08.003 ↗
30. H. Wu, J. Carrete, Z. Zhang, Y. Qu, Z. Shen, Z. Wang, L.D. Zhao, J. He, Strong enhancement of phonon scattering through nanoscale grains in lead sulfide thermoelectrics. NPG Asia Mater. 6, e108 (2014)10.1038/am.2014.39 ↗
31. Y. Pan, T.R. Wei, Q. Cao, J.F. Li, Mechanically enhanced p- and n-type Bi2Te3-based thermoelectric materials reprocessed from commercial ingots by ball milling and spark plasma sintering. Mate. Sci. Eng. B 197, 75–81 (2015)10.1016/j.mseb.2015.03.011 ↗
32. D. Zhang, J.D. Lei, W.B. Guan, Z. Ma, C. Wang, L.J. Zhang, Z.X. Cheng, Y.X. Wang, Enhanced thermoelectric performance of BiSbTe alloy: energy filtering effect of nanoprecipitates and the effect of SiC nanoparticles. J. Alloys Compd. 784, 1276–1283 (2019)10.1016/j.jallcom.2019.01.084 ↗
33. T.J. Zhu, Y.T. Liu, C.G. Fu, J.P. Heremans, J.G. Snyder, X.B. Zhao, Compromise and synergy in high-efficiency thermoelectric materials. Adv. Mater. 29, 1605884 (2017)10.1002/adma.201605884 ↗
34. O. Meroz, N. Elkabets, Y. Gelbstein, Enhanced thermoelectric properties of n-Type Bi2Te3−xSex alloys following melt-spinning. ACS Appl. Energy Mater. 3, 2090–2095 (2020)10.1021/acsaem.9b02133 ↗
35. J.K. Lee, J.H. Son, S.D. Park, Particle size dependent anisotropic thermoelectric properties of N-type Bi2(Te, Se)3 alloys on hot deformation. J. Alloys Compd. 858, 157727 (2021)10.1016/j.jallcom.2020.157727 ↗