Magnetic fluid hyperthermia controlled by frequency counter and colorimetric program systems based on magnetic nanoparticles
Source abstract
Abstract
Abstract Magnetic nanoparticles (MNP) are anticipated to perform better in terms of thermal conductivity when exposed to alternating magnetic fields (AMF). Herein, key parameters for efficient heating are examined in an AMF that is organized and managed by a zero voltage switching (ZVS) and frequency counter system, which has shown great potential for hyperthermia (HT). The present study investigates the set-up of a matched coil coupled with direct current (DC) power and a frequency counter. The set-up technique for inducing HT in magnetic fluid NPs used in in vitro experiments and magnetic fluid calorimetric applications is advanced. Superparamagnetic iron oxide nanoparticles Fe3O4 (SPIONs) was prepared by the sonochemical method and coated with polyethylene glycol (Fe3O4@PEG). Our sample Fe3O4@PEG crystallized nano-size with an average particle size of 14 nm, and high magnetic saturation (MS) about 49 emu/g. The MNPs exposed to AMF at 300 kHz exhibited the highest thermal values (42–45 °C). The specific absorption rate values of 188, 217, and 234 W/g for the NP concentrations of 5, 10, and 20 mg/ml, respectively reveal the improvement of our set-up to enhance the SPIONs as a thermal agent.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrical and Bioimpedance Tomography · Characterization and Applications of Magnetic Nanoparticles · Radiation Therapy and Dosimetry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. M.E. Brollo, I.F. Pinheiro, G.S. Bassani, G. Varet, V.C. Guersoni, M. Knobel, A.C. Bannwart, D. Muraca, C. van der Geest, Iron oxide nanoparticles in a dynamic flux: implications for magnetic hyperthermia-controlled fluid viscosity. ACS Appl. Nano Mater. 4(12), 13633–13642 (2021). https://doi.org/10.1021/acsanm.1c0306110.1021/acsanm.1c03061 ↗
2. M. Suleman, S. Riaz, In silico study of hyperthermia treatment of liver cancer using core-shell CoFe2O4@MnFe2O4 magnetic nanoparticles. JJoMM Mater. 498, 166143 (2020). https://doi.org/10.1016/j.jmmm.2019.16614310.1016/j.jmmm.2019.166143 ↗
3. A. Manohar, D.D. Geleta, C. Krishnamoorthi, J. Lee, Synthesis, characterization and magnetic hyperthermia properties of nearly monodisperse CoFe2O4 nanoparticles. JCI 46, 28035–28041 (2020). https://doi.org/10.1016/j.ceramint.2020.07.29810.1016/j.ceramint.2020.07.298 ↗
4. I. Ali, Y. Pan, Y. Jamil, A.A. Shah, M. Amir, S. Al-Islam, Y. Fazal, J. Chen, Z. Shen, Comparison of copper-based Cu–Ni and Cu–Fe nanoparticles synthesized via laser ablation for magnetic hyperthermia and antibacterial applications. Physica B 650, 414503 (2023). https://doi.org/10.1016/j.physb.2022.41450310.1016/j.physb.2022.414503 ↗
5. A. Chichet, J. Skowronek, M. Kubaszewska, M. Kanikowski, Hyperthermia—description of a method and a review of clinical applications. Repods Pract. Oncol. Radiother. 5(12), 267–275 (2007). https://doi.org/10.1016/S1507-1367(10)60065-X10.1016/S1507-1367(10)60065-X ↗
6. F.I. Pinheiro, E.F. Maria-Brollo, S.G. Bassani, G. Varet, D. Merino Garcia, C.B.V. Guersoni, M. Knobel, C.A. Bannwart, D. Muraca, C. van der Geest, Effect of viscosity and colloidal stability on the magnetic hyperthermia of petroleum-based nanofluids. Fuel 331, 125810 (2023). https://doi.org/10.1016/j.fuel.2022.12581010.1016/j.fuel.2022.125810 ↗
7. M. Yusefi, K. Shameli, O.S. Yee, S.Y. Teow, Z. Hedayatnasab, H. Jahangirian, T.J. Webster, K. Kuca, Original research highly-accessed green synthesis of Fe3O4 nanoparticles stabilized by a garcinia mangostana fruit peel extract for hyperthermia and anticancer activities. Int. J. Nanomed. 16, 2515–2532 (2021). https://doi.org/10.2147/IJN.S28413410.2147/IJN.S284134 ↗
8. Z. Hedayatnas, A. Dabbagh, F. Abnis, W.M.A. Daud, Polycaprolactone-coated superparamagnetic iron oxide nanoparticles for in vitro magnetic hyperthermia therapy of cancer. Eur. Polym. J. 133, 109789 (2020). https://doi.org/10.1016/j.eurpolymj.2020.10978910.1016/j.eurpolymj.2020.109789 ↗
9. Z. Hedayatnasab, A. Ramazani, H. Shirgahi, M.R. Mozafari, Heat induction of iron oxide nanoparticles with rational artificial neural network design-based particle swarm optimization for magnetic cancer hyperthermia. Mater. Res. Bull. 157, 112035 (2023). https://doi.org/10.1016/j.materresbull.2022.11203510.1016/j.materresbull.2022.112035 ↗
10. H. Etemadi, P.G. Plieger, Magnetic fluid hyperthermia based on magnetic nanoparticles: physical characteristics, historical perspective, clinical trials, technological challenges, and recent advances. Adv. Ther. 3, 200006 (2020). https://doi.org/10.1002/adtp.20200006110.1002/adtp.202000061 ↗
11. N. Ajinkya, X. Yu, P. Kaithal, H. Luo, P. Somani, S. Ramakrishna, Magnetic iron oxide nanoparticle (IONP) synthesis to applications: present and future. JM 13, 4644 (2020). https://doi.org/10.3390/ma1320464410.3390/ma13204644 ↗
12. I. Ali, Y. Pan, Y. Jamil, A.A. Shah, M. Amir, S.A. Islam, Y. Fazal, J. Chen, Z. Shen, Comparison of copper-based Cu–Ni and Cu–Fe nanoparticles synthesized via laser ablation for magnetic hyperthermia and antibacterial applications. Physica B 650, 414503 (2023). https://doi.org/10.1016/j.physb.2022.41450310.1016/j.physb.2022.414503 ↗
13. I. Raouf, J. Lee, H.S. Kim, M.H. Kim, Parametric investigations of magnetic nanoparticles hyperthermia in ferrofluid using finite element analysis. Int. J. Therm. Sci. 159, 106604 (2021). https://doi.org/10.1016/j.ijthermalsci.2020.10660410.1016/j.ijthermalsci.2020.106604 ↗
14. G.P. Skandalakis, D.R. Rivera, C.D. Rizea, A. Bouras, J.G. Jesu Raj, D. Bozec, C.G. Hadjipanayis, Hyperthermia treatment advances for brain tumors. Int. J. Hyperth. 37, 3–19 (2020). https://doi.org/10.1080/02656736.2020.177251210.1080/02656736.2020.1772512 ↗
15. H. Ghayour, M. Abdellahi, N. Ozada, S. Jabbrzare, A. Khandan, Hyperthermia application of zinc doped nickel ferrite nanoparticles. JJoPCo Solids 111, 464–472 (2017). https://doi.org/10.1016/j.jpcs.2017.08.01810.1016/j.jpcs.2017.08.018 ↗
16. S. Nasrin, F.U.Z. Chowdhury, S. Hoque, Study of hydrodynamic size distribution and hyperthermia temperature of chitosan encapsulated zinc-substituted manganese nanoferrites suspension. JPBCM 561, 54–63 (2019). https://doi.org/10.1016/j.physb.2019.02.05310.1016/j.physb.2019.02.053 ↗
17. A. Vincent Balogun, B.O. Otanocha, I. Bankole, Development of smart linear velocity measuring device by embedding sensors with the arduino microcontroller. In IML '17 Proceedings of the 1st International Conference on IoT and Machine Learning (2017). https://doi.org/10.1145/3109761.315839910.1145/3109761.3158399 ↗
18. Q. Zeng, I. Baker, J.A. Loudis, Y. Liao, P.J. Hoopes, J.B. Weaver, Weaver, Fe/Fe oxide nanocomposite particles with large specific absorption rate for hyperthermia. Appl. Phys. Lett. 90, 233112 (2007). https://doi.org/10.1063/1.274606410.1063/1.2746064 ↗
19. B. Van, L.W. Bartels, D.A. Leeuw, J.J. Lagendijk, J.B. Van, Experimental validation of hyperthermia SAR treatment planning using MR B1 imaging. Phys. Med. Biol. 22, 5029–5042 (2004). https://doi.org/10.1088/0031-9155/49/22/00110.1088/0031-9155/49/22/001 ↗
20. M. Yusefi, K. Shameli, Z. Hedayatnasab, S.Y. Teow, U.N. Ismail, C.A. Azlan, R.R. Ali, Green synthesis of Fe3O4 nanoparticles for hyperthermia, magnetic resonance imaging and 5-fluorouracil carrier in potential colorectal cancer treatment. Res. Chem. Intermed. 47, 1789–1808 (2021). https://doi.org/10.1007/s11164-020-04388-110.1007/s11164-020-04388-1 ↗
21. S.I. El-Dek, A.A. Maha, M.E. Sara, E.A. Shehab, Comparative investigations on ferrite nanocomposites for magnetic hyperthermia applications. J. Magn. Magn. Mater. 458, 147–155 (2018). https://doi.org/10.1016/j.jmmm.02.05210.1016/j.jmmm.02.052 ↗
22. D.A. Ausilio, Arduino: a low-cost multipurpose lab equipment. Behav. Res. Methods 44(2), 305–313 (2012). https://doi.org/10.3758/s13428-011-0163-z10.3758/s13428-011-0163-z ↗
23. E.D. Bordelon, C. Cornejo, G. Cordula, W. Fritz, T. DeWeese, R. Ivkov, Magnetic nanoparticle heating efficiency reveals magneto-structural differences when characterized with wide ranging and high amplitude alternating magnetic fields. J. Appl. Phys. 109, 124904 (2011)10.1063/1.3597820 ↗
24. M. Subramanian, A. Miaskowski, G. Pearce, J. Dobson, A coil system for real-time magnetic fluid hyperthermia microscopy studies. Int. J. Hyper. 32(2), 112–120 (2016). https://doi.org/10.3109/02656736.2015.110473210.3109/02656736.2015.1104732 ↗
25. V. Vinodhini, K. Chintagumpala, Superparamagnetic hyperthermia and cytotoxicity properties of bimagnetic core–shell nanoparticles synthesized by solvothermal reflux method. J. Magn. Magn. Mater. 565, 170290 (2023). https://doi.org/10.1016/j.jmmm.2022.17029010.1016/j.jmmm.2022.170290 ↗
26. M. Yusefi, K. Shameli, O.S. Yee, S. Teow, Z. Hedayatnasab, H. Jahangirian, J.T. Webster, Green synthesis of Fe3O4 nanoparticles stabilized by a Garcinia mangostana fruit peel extract for hyperthermia and anticancer activities. Int. J. Nanomed. 16, 2515–2532 (2021). https://doi.org/10.2147/IJN.S28413410.2147/IJN.S284134 ↗
27. A. Rajan, N.K. Sahu, Inductive calorimetric assessment of iron oxide nano-octahedrons for magnetic fluid hyperthermia. Colloids Surf. A Physica Eng. Asp. (2020). https://doi.org/10.1016/j.colsurfa.2020.12521010.1016/j.colsurfa.2020.125210 ↗
28. A. Hajalilou, L.P. Ferreira, M.E.M. Jorge, C.P. Reis, M.M. Cruz, Superparamagnetic Ag-Fe3O4 composites nanoparticles for magnetic fluid hyperthermia. J. Magn. Magn. Mater. 537, 168242 (2021). https://doi.org/10.1016/j.jmmm.2021.16824210.1016/j.jmmm.2021.168242 ↗
29. N.N. Liu, P.A. Pyatakov, N.M. Zharkov, Optimization of Zn–Mn ferrite nanoparticles for low frequency hyperthermia: Exploiting the potential of superquadratic field dependence of magnetothermal response. Appl. Phys. Lett. 120, 102403 (2022). https://doi.org/10.1063/5.008285710.1063/5.0082857 ↗
30. V. Nemkov, R. Ruffini, R. Goldstein, J. Jackowski, AMF Life Systems LLC, Auburn Hills, Michigan, USA, T.L. DeWeese, R. Ivkov, Magnetic field generating inductor for cancer hyperthermia research. Int. J. Comp. Math. Electr. Electron. Eng. 30(5), 1626–1636 (2011). https://doi.org/10.1108/03321641111152784.10.1108/03321641111152784 ↗
31. E.D. Bordelon, C.R. Goldstein, S.V. Nemkov, A. Kumar, K.J. Jackowski, T. DeWeese, R. Ivkov, Modified solenoid coil that efficiently produces high amplitude AC magnetic fields with enhanced uniformity for biomedical applications. IEEE Trans. Magn. 48, 1 (2012). https://doi.org/10.1109/TMAG.2011.216252710.1109/TMAG.2011.2162527 ↗
32. V.A. Baloguna, B.I. Oladapo, A.O.M. Adeoye, J.F. Kayode, S.O. Afolabi, Hysteresis analysis of Thornton (IP6, IP12E and TH5V) magnetic materials through the use of Arduino microcontroller. J. Mater. Res. Technol. (2018). https://doi.org/10.1016/j.jmrt.2017.05.01810.1016/j.jmrt.2017.05.018 ↗
33. R.R. Akurati, N.K. Jaladi, S.R. Kurapati, G. Kapusetti, M. Choppadandi, P. Mandal, Preparation, characterization and study of magnetic induction heating of Co–Cu nanoparticles. Mater. Today. Commun. 34, 104964 (2023). https://doi.org/10.1016/j.mtcomm.2022.10496410.1016/j.mtcomm.2022.104964 ↗
34. H. Pham, V. Pham, A. Nguyen, C. Nguyen, H. Do, X. Nguyen, V. Le, Magnetic fluid based on Fe3O4 nanoparticles: preparation and hyperthermia application. J. Phys. Conf. Ser. 1, 187 (2009). https://doi.org/10.1088/1742-6596/187/1/01206910.1088/1742-6596/187/1/012069 ↗
35. M.E. Sadat, P. Ronak, S. Jason, L.B. Sergey, C.E. Rodney, Z. Jiaming, X. Hong, W. Yilong, M.P. Giovanni, B.M. David, S. Donglu, Effect of spatial confinement on magnetic hyperthermia via dipolar interactions in Fe3O4 nanoparticles for biomedical applications. Mater. Sci. Eng. C 42, 52–63 (2014). https://doi.org/10.1016/j.msec.2014.04.06410.1016/j.msec.2014.04.064 ↗
36. V.M. Khot, A.B. Salunkhe, J.M. Ruso, S.H. Pawar, Improved magnetic induction heating of nanoferrites for hyperthermia applications: correlation with colloidal stability and magneto-structural properties. J. Magn. Magn. Mater. 384, 335–343 (2015). https://doi.org/10.1016/j.jmmm.2015.03.03910.1016/j.jmmm.2015.03.039 ↗
37. E. Garaio, J.M. Collantes, J.A. Garcia, F. Plazaola, S. Mornet, F. Couillaud, O. Sandre, A wide-frequency range AC magnetometer to measure the specific absorption rate in nanoparticles for magnetic hyperthermia. J. Magn. Magn. Mater. (2013). https://doi.org/10.1016/j.jmmm.2013.11.021i10.1016/j.jmmm.2013.11.021i ↗
38. H. Koichiro, N. Michihiro, S. Wataru, Y. Toshinobu, M. Hirokazu, O. Shuji, A. Masahiro, M. Toshio, I. Kazunori, Superparamagnetic nanoparticle clusters for cancer theranostics combining magnetic resonance imaging and hyperthermia treatment. Theranostics 3(6), 366–376 (2013). https://doi.org/10.7150/thno.586010.7150/thno.5860 ↗
39. M.E. Cano, R.H. Medina, V.V.A. Fern, P.E. Casillas, Magnetic heating ability of silica-cobalt ferrite nanoparticles. Revista Mexicana de Ingenierıa Quimica. 13(2), 555–561 (2014).
40. F.C. Diego, M.Z. Pedro, M. Marzia, P.M. María, C. Aldo, H. Francisco, M.B. Sánchez, R. Fernández, Effect of nanoclustering and dipolar interactions in heat generation for magnetic hyperthermia. Langmuir Jan. (2016). https://doi.org/10.1021/acs.langmuir.5b0355910.1021/acs.langmuir.5b03559 ↗
41. A. Yosefine, S. Youngjin, O. Junghwan, Controlling the optimum dose of AMPTS functionalized-magnetite nanoparticles for hyperthermia cancer therapy. Appl. Nanosci. 1, 237–246 (2011). https://doi.org/10.1007/s13204-011-0032-110.1007/s13204-011-0032-1 ↗
42. Z.M. Vanessa, F.G. Mar, G.G. Álvaro, S. Beatriz, S.R. Julio, G. Gerardo, H. Rebeca, M. Carmen, Chitosan nanoparticles for combined drug delivery and magnetichyperthermia: from preparation to in vitro studies. Carbohydr. Polym. 157, 361–370 (2017). https://doi.org/10.1016/j.carbpol.2016.09.08410.1016/j.carbpol.2016.09.084 ↗
43. S. Guba, B. Horváth, I. Szalai, Application and comparison of thermistors and fiber optic temperature sensor reference for ILP measurement of magnetic fluids in double cell magnetic hyperthermia. Heliyon 8, e09606 (2022). https://doi.org/10.1016/j.heliyon.2022.e0960610.1016/j.heliyon.2022.e09606 ↗