journal article·2013-05Open access

Enhanced resputtering and asymmetric interface mixing in W/Si multilayers

Christian Eberl, Tobias Liese, Felix Schlenkrich, Florian Döring, Hans Hofsäss, Hans-Ulrich Krebs

Applied Physics A· Volume 111· Issue 2

Abstract

During growth of multilayers by pulsed laser deposition (PLD), often both intermixing and resputtering occur due to the high kinetic energy of the particles transferred from the target to the substrate surface. In order to obtain a fundamental understanding of the underlying processes, W/Si multilayers have been studied by the complementary methods of transmission electron microscopy (TEM), X-ray reflectivity (XRR) and in-situ rate monitoring. For the experiments, deposition conditions were chosen that result in high energetic Si ions and mainly low energetic W atoms for the multilayer growth. Under these conditions, interface mixing of up to 3 nm occurs at the W/Si interfaces, while the Si/W interfaces remain sharp. Furthermore, enhanced resputtering of Si leads to a Si thickness deficit of up to 2 nm at the W/Si interfaces. The presented results can be understood by a combination of theoretical calculations as well as SRIM and TRIDYN simulations, which match perfectly to the experimentally obtained intermixing and enhanced resputtering of Si at the W/Si interfaces.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ion-surface interactions and analysis · Semiconductor materials and devices · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. D.B. Chrisey, G.K. Hubler, Pulsed Laser Deposition of Thin Films (Wiley, New York, 1994)
2. R. Eason, Pulsed Laser Deposition of Thin Films (Wiley, New York, 2007)
3. H.U. Krebs, Characteristic properties of laser deposited metallic systems. Int. J. Non-Equilib. Process. 10, 3–24 (1997)
4. J.G. Lunney, Pulsed laser deposition of metal and metal multilayer films. Appl. Surf. Sci. 86, 79–85 (1995)10.1016/0169-4332(94)00368-8 ↗
5. S. Fähler, H.U. Krebs, Calculations and experiments of material removal and kinetic energy during pulsed laser ablation of metals. Appl. Surf. Sci. 96–98, 61–65 (1996)10.1016/0169-4332(95)00466-1 ↗
6. H. Frey, G. Kienel, Dünnschichttechnologie (VDI, Düsseldorf, 1987), p. 103
7. S. Fähler, K. Sturm, H.U. Krebs, Resputtering during the growth of pulsed-laser-deposited metallic films in vacuum and in an ambient gas. Appl. Phys. Lett. 75, 3766–3768 (1999)10.1063/1.125449 ↗
8. M. Austgen, D. Koehl, P. Zalden, T. Kubart, T. Nyberg, A. Pflug, M. Siemers, S. Berg, M. Wuttig, Sputter yield amplification by tungsten doping of Al2O3 employing reactive serial co-sputtering: process characteristics and resulting film properties. J. Phys. D 44, 345501 (2011)10.1088/0022-3727/44/34/345501 ↗
9. S. Berg, A.M. Barklund, B. Gelin, C. Nender, I. Katardjiev, Atom assisted sputtering yield amplification. J. Vac. Sci. Technol. A 10, 1592–1596 (1992)10.1116/1.578049 ↗
10. E. Spiller, Soft X-ray Optics (SPIE Optical Engineering Press, Bellingham, 1994)10.1117/3.176482 ↗
11. A. Ruhlandt, T. Liese, V. Radisch, S. Krüger, M. Osterhoff, K. Giewekemeyer, H.U. Krebs, T. Salditt, A combined Kirkpatrick–Baez mirror and multilayer lens for sub-10 nm X-ray focusing. AIP Adv. 2, 012175 (2012)10.1063/1.3698119 ↗
12. H.U. Krebs, O. Bremert, Pulsed laser deposition of thin metallic alloys. Appl. Phys. Lett. 62, 2341–2343 (1993)10.1063/1.109412 ↗
13. J.F. Ziegler, J.P. Biersack, M.D. Ziegler, SRIM—the Stopping and Range of Ions in Matter (SRIM Co., Chester, 2008)
14. W. Möller, W. Eckstein, Tridyn—a TRIM simulation code including dynamic composition changes. Nucl. Instrum. Methods Phys. Res., Sect. B, Beam Interact. Mater. Atoms 2, 814–818 (1984)10.1016/0168-583X(84)90321-5 ↗
15. D.L. Windt, IMD—software for modeling the optical properties of multilayer films. Comput. Phys. 12, 360–370 (1998)10.1063/1.168689 ↗
16. H. Windischmann, An intrinsic stress scaling law for polycrystalline thin films prepared by ion beam sputtering. J. Appl. Phys. 62, 1800–1807 (1987)10.1063/1.339560 ↗
17. Y. Yamamura, H. Tawara, Energy dependence of ion-induced sputtering yields from monatomic solids at normal incidence. At. Data Nucl. Data Tables 62, 149–253 (1996)10.1006/adnd.1996.0005 ↗
18. S. Fähler, S. Kahl, M. Weisheit, K. Sturm, H.U. Krebs, The interface of laser deposited Cu/Ag multilayers: evidence for the ‘subsurface growth mode’ during pulsed laser deposition. Appl. Surf. Sci. 154–155, 419–423 (2000)10.1016/S0169-4332(99)00471-7 ↗