Micro-hot-embossing of 316L stainless steel micro-structures
Source abstract
Abstract
In this paper, the fabrication of an array of 316L stainless steel cylindrical micro-structures by hot-embossing is studied. The effects of various embossing parameters on the filling of the micro-cavities of silicon mold insert and the demolding of micro-structures are investigated. They include different silicon mold insert configurations, embossing pressure, embossing temperature, embossing time and the thickness of embossing substrate on which the micro-structures stand. Two types of silicon mold insert configurations are investigated. Hot-embossing study with the silicon mold insert attached on the upper mold plate shows that it is not feasible to achieve complete filling. Incomplete filling occurs and increasing the embossing pressure causes excessive thinning of the embossing substrate, so that micro-structures are torn off during demolding. Experiments show that the configuration that the silicon mold insert is positioned flush with lower mold surface improves complete filling. Using suitable embossing pressure and temperature, the larger substrate thickness and longer embossing time ensure the fabrication of defect-free fully filled micro-structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofabrication and Lithography Techniques · Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. A. Rota, T.-V. Duong, T. Hartwig, Microsyst. Technol. 7, 225 (2002)10.1007/s005420100101 ↗
2. V. Piotter, G. Finnah, G. Oerlygsson, R. Ruprecht, J. Hausselt, in 3rd International Conference on Materials Processing for Properties and Performance (MP3), vol. 3 (2004), p. 833
3. H. Becker, C. Gärtner, Electrophoresis 21, 12 (2000)10.1002/(SICI)1522-2683(20000101)21:1<12::AID-ELPS12>3.0.CO;2-7 ↗
4. M. Heckele, W. Bacher, K. Mueller, Microsyst. Technol. 3, 122 (1998)10.1007/s005420050112 ↗
5. X.J. Shen, L.W. Pan, L.W. Lin, Sens. Actuators A 97–98, 428 (2002)10.1016/S0924-4247(02)00029-8 ↗
6. Y. Murakoshi, X.C. Shan, R. Maeda, Int. J. Comput. Eng. Sci. 4(3), 617 (2003)10.1142/S1465876303001897 ↗
7. S.D. Moon, N. Lee, S. Kang, J. Micromech. Microeng. 13, 98 (2003)10.1088/0960-1317/13/1/314 ↗
8. P. Dario, M.C. Carrozza, A. Benvenuto, A. Menciassi, J. Micromech. Microeng. 10, 235 (2000)10.1088/0960-1317/10/2/322 ↗
9. A. Rota, T.-V. Duong, T. Hartwig, Microsyst. Technol. 8, 323 (2002)10.1007/s00542-002-0157-y ↗
10. G. Fu, N.H. Loh, S.B. Tor, B.Y. Tay, Y. Murakoshi, R. Maeda, Appl. Phys. A, Mater. 81(3), 495 (2005)10.1007/s00339-005-3273-6 ↗
11. O. Rotting, W. Ropke, H. Becker, C. Gartner, J. Micromech. Microeng. 8, 32 (2002)
12. H. Becker, U. Heim, in Proceedings of the Twelfth IEEE International Conference on Micro Electro Mechanical Systems, Orland, Florida, USA (1999), p. 228