Study on the wear and corrosion resistance of Fe–Mo coatings on 65Mn steel ploughshares by laser cladding
Source abstract
Abstract
To improve the wear resistance and corrosion resistance of 65Mn ploughshares, Fe–Mo coatings were coated on the surface of the 65Mn steel. The microstructure, hardness, impact toughness, wear resistance, and corrosion resistance of Fe–Mo coatings were investigated. The microstructure of the coating was dense, with no obvious defects. The hardness of the coating was nearly two times higher than that of the 65Mn. The coatings show a significant increase in wear resistance with a slight reduction in impact toughness. The electrochemical self-corrosion current density was reduced by two orders of magnitude. The wear and corrosion resistance of the coating is much better than that of 65Mn matrix. Among them, the performance of Fe–15Mo coating is the best, which can better meet the application requirements of Plowshare.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. J. Singh, S.S. Chatha, B.S. Sidhu, Abrasive wear characteristics and microstructure of Fe-based overlaid ploughshares in different field conditions. Soil Tillage Res. 205, 104771 (2021). https://doi.org/10.1016/j.still.2020.10477110.1016/j.still.2020.104771 ↗
2. A. Kalácska, P.D. Baets, D. Fauconnier, F. Schramm, L. Frerichs, J. Sukumaran, Abrasive wear behaviour of 27MnB5 steel used in agricultural tines. Wear 442–443, 203107 (2020). https://doi.org/10.1016/j.wear.2019.20310710.1016/j.wear.2019.203107 ↗
3. B. Wei, L. Yan, L.Z. Jiang, Z.L. Hu, S.S. Li, Errors of structural seismic responses caused by frequency filtering based on seismic wave synthesis. Soil Dyn. Earthq. Eng. 149, 10862 (2021). https://doi.org/10.1016/j.soildyn.2021.10686210.1016/j.soildyn.2021.106862 ↗
4. P. Li, D. Liu, W. Bao, L. Ma, Y. Duan, Surface characterization and diffusion model of pack borided TB2 titanium alloy. Ceram. Int. 44, 18429–18437 (2018). https://doi.org/10.1016/j.ceramint.2018.07.06010.1016/j.ceramint.2018.07.060 ↗
5. K.Y. Chen, X.F. Yang, Y.F. Zhang, H. Yang, G.J. Lv, Y.L. Gao, Research progress of improving surface friction properties by surface texture technology. Int. J. Adv. Manuf. Technol. 116, 2797–2821 (2021). https://doi.org/10.1007/s00170-021-07614-110.1007/s00170-021-07614-1 ↗
6. X.Y. Wang, D.Y. Qu, Y.H. Duan, M.J. Peng, Wear and corrosion properties of a B-Al composite layer on pure titanium. Ceram. Int. 48, 12038–12047 (2022). https://doi.org/10.1016/j.ceramint.2022.01.06110.1016/j.ceramint.2022.01.061 ↗
7. Y.H. Duan, X.Y. Wang, D. Liu, W.Z. Bao, P. Li, M.J. Peng, Characteristics, wear and corrosion properties of borided pure titanium by pack boriding near α → β phase transition temperature. Ceram. Int. 46, 16380–16387 (2020). https://doi.org/10.1016/j.ceramint.2020.03.19710.1016/j.ceramint.2020.03.197 ↗
8. D.Y. Qu, D. Liu, X.Y. Wang, Y.H. Duan, M.J. Peng, Corrosion and wear properties of TB2 titanium alloy borided by pack boriding with La2O3. Trans. Nonferrous Metals Soc. China 32, 868–881 (2022). https://doi.org/10.1016/S1003-6326(22)65839-410.1016/S1003-6326(22)65839-4 ↗
9. M. Keddam, M. Ortiz-Dominguez, M. Elias-Espinosa, A.A. Flores, J.Z. Silva, D.Z. Zepeda, O.A.G. Vargas, Kinetic investigation and wear properties of Fe2B layers on AISI 12L14 steel. Metall. Mater. Trans. A 49, 1895–1907 (2018). https://doi.org/10.1007/s11661-018-4535-110.1007/s11661-018-4535-1 ↗
10. D. Liu, Y.H. Duan, W.Z. Bao, M.J. Peng, Characterization and growth kinetics of boride layers on Ti–5Mo–5V–8Cr–3Al alloy by pack boriding with CeO2. Mater. Charact. 164, 110362 (2020). https://doi.org/10.1016/j.matchar.2020.11036210.1016/j.matchar.2020.110362 ↗
11. Y.H. Duan, P. Li, Z.Z. Chen, J. Shi, L.S. Ma, Surface evolution and growth kinetics of Ti6Al4V alloy in pack boriding. J. Alloy. Compd. 742, 690–701 (2018). https://doi.org/10.1016/j.jallcom.2018.01.38310.1016/j.jallcom.2018.01.383 ↗
12. L.F. Hu, J. Li, Y.H. Lv, Y.F. Tao, Corrosion behavior of laser-clad coatings fabricated onTi6Al4V with different contents of TaC addition. Rare Met. 39, 436–447 (2020). https://doi.org/10.1007/s12598-017-0973-y10.1007/s12598-017-0973-y ↗
13. J.B. Cheng, B. Sun, Y.Y. Ge, X.L. Hu, L.H. Zhang, X.B. Liang, X.C. Zhang, Nb doping in laser-cladded Fe25Co25Ni25(B0.7Si0.3)25 high entropy alloy coatings: microstructure evolution and wear behavior. Surf. Coat. Technol. 402, 126321 (2020). https://doi.org/10.1016/j.surfcoat.2020.126321.10.1016/j.surfcoat.2020.126321 ↗
14. X. Wen, X.F. Cui, G. Jin, X.R. Zhang, Y. Zhang, D. Zhang, Y.C. Fang, Design and characterization of FeCrCoAlMn0.5Mo0.1 high-entropy alloy coating by ultrasonic assisted laser cladding. J. Alloys Compd. 835, 155449 (2020). https://doi.org/10.1016/j.jallcom.2020.155449.10.1016/j.jallcom.2020.155449 ↗
15. S.R. More, D.V. Bhatt, J.V. Menghani, Resent research status on laser cladding as erosion resistance technique—an overview. Mater. Today 4, 9902–9908 (2017). https://doi.org/10.1016/j.matpr.2017.06.29110.1016/j.matpr.2017.06.291 ↗
16. Y.Z. Li, Y. Shi, E. Olugbade, Microstructure, mechanical, and corrosion resistance properties of Al0.8CrFeCoNiCuX high-entropy alloy coatings on aluminum by laser cladding. Mater. Res. Express. 7, 026504 (2020). https://doi.org/10.1088/2053-1591/ab6c9b.10.1088/2053-1591/ab6c9b ↗
17. S.D. Sun, D. Fabijanic, C. Barr, Q.C. Liu, K. Walker, N. Matthews, N. Orchowski, M. Easton, M. Brandt, In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates. Surf. Coat. Technol. 333, 210–219 (2018). https://doi.org/10.1016/j.surfcoat.2017.10.08010.1016/j.surfcoat.2017.10.080 ↗
18. Y. Yang, A.H. Wang, D.H. Xiong, Z.W. Wang, D. Zhou, S.Q. Li, H. Zhang, Effect of Cr content on microstructure and oxidation resistance of laser-clad Cu–Ni–Fe–Mo–xCr alloy coating. Surf. Coat. Technol. 384, 125316 (2020). https://doi.org/10.1016/j.surfcoat.2019.12531610.1016/j.surfcoat.2019.125316 ↗
19. F.Z. Dai, Y.J. Sun, Y.X. Ren, H.M. Xiang, Y.C. Zhou, Segregation of solute atoms in ZrC grain boundaries and their effects on grain boundary strengths. J. Mater. Sci. Technol. 101, 234–241 (2022). https://doi.org/10.1016/j.jmst.2021.05.05810.1016/j.jmst.2021.05.058 ↗
20. C.M. Lin, W.Y. Kai, C.Y. Su, K.H. Key, Empirical alloys-by-design theory calculations to the microstructure evolution mechanical properties of Mo-doped laser cladding NiAl composite coatings on medium carbon steel substrates. J. Alloys Compd. 702, 679–686 (2017). https://doi.org/10.1016/j.jallcom.2017.01.27810.1016/j.jallcom.2017.01.278 ↗
21. C.Y. Liu, P. Xu, D.Y. Zheng, Q.B. Liu, Study on microstructure and properties of a Fe-based SMA/PZT composite coating produced by laser cladding. J. Alloys Compd. 831, 154813 (2020). https://doi.org/10.1016/j.jallcom.2020.15481310.1016/j.jallcom.2020.154813 ↗
22. Z. Gu, P. Mao, Y.F. Gou, Y. Chao, S.Q. Xi, Microstructure and properties of MgMoNbFeTi2YX high entropy alloy coatings by laser cladding. Surf. Coat. Technol. 402, 126303 (2020). https://doi.org/10.1016/j.surfcoat.2020.12630310.1016/j.surfcoat.2020.126303 ↗
23. J. Liu, Y. Chen, J. Zhang, Oxidation behavior of Ni–Mo–Si alloy coatings fabricated on carbon steel by laser cladding. Surf. Coat. Technol. 375, 903–910 (2019). https://doi.org/10.1016/j.surfcoat.2019.08.00110.1016/j.surfcoat.2019.08.001 ↗
24. H.S. Maharana, K. Mondal, Manifestation of Hall–Petch breakdown in nanocrystalline electrodeposited Ni–MoS2 coating and its structure dependent wear resistance behavior. Surf. Coat. Technol. 410, 126950 (2021). https://doi.org/10.1016/j.surfcoat.2021.12695010.1016/j.surfcoat.2021.126950 ↗
25. G.F. Chi, D.Q. Yi, B. Jiang, L.Y. Yang, H.Q. Liu, Crack propagation during Charpy impact toughness testing of Ti–Al–V–Mo–Zr alloy tubes containing equiaxed and lamellar microstructures. J. Alloys Compd. 852, 156581 (2020). https://doi.org/10.1016/j.jallcom.2020.15658110.1016/j.jallcom.2020.156581 ↗
26. C. Sun, P.X. Fu, X.P. Ma, H.H. Liu, N.Y. Du, Y.F. Cao, H.W. Liu, D.Z. Li, Effect of matrix carbon content and lath martensite microstructures on the tempered precipitates and impact toughness of a medium-carbon low-alloy steel. J. Mater Res. Technol. 9, 7701–7710 (2020). https://doi.org/10.1016/j.jmrt.2020.05.00210.1016/j.jmrt.2020.05.002 ↗
27. Y.A.H. Jose, V.U. Alejandro, P.G. Katherine, P.H. Rodrigo, J.T. Maria, M.A. Jose, Boron addition in a non-equiatomic Fe50Mn30Co10Cr10 alloy manufactured by laser cladding: microstructure and wear abrasive resistance. Appl. Surf. Sci. 515, 146084 (2020). https://doi.org/10.1016/j.apsusc.2020.14608410.1016/j.apsusc.2020.146084 ↗
28. Q. Shao, Continuum model of abrasive layer in an abrasive wear test. Wear 259, 36–43 (2005). https://doi.org/10.1016/j.wear.2005.03.01510.1016/j.wear.2005.03.015 ↗
29. F. Ficici, The experimental optimization of abrasive wear resistance model for an in-situ AlB2/Al–4Cu metal matrix composite. Ind. Lubr. Tribol. 68, 632–639 (2016). https://doi.org/10.1108/ILT-12-2015-019810.1108/ILT-12-2015-0198 ↗
30. G. Saha, K. Valtonen, A. Saastamoinen, P. Peura, V.T. Kuokkala, Impact-abrasive and abrasive wear behavior of low carbon steels with a range of hardness-toughness properties. Wear 450–451, 203263 (2020). https://doi.org/10.1016/j.wear.2020.20326310.1016/j.wear.2020.203263 ↗
31. E.D. Wen, R.B. Song, C.H. Cai, Study of the three-body impact abrasive wear behaviour of a low alloy steel reinforced with niobium. J. Manuf. Process. 46, 185–193 (2019). https://doi.org/10.1016/j.jmapro.2019.08.02610.1016/j.jmapro.2019.08.026 ↗
32. I. Fordyce, M. Annasamy, S.D. Sun, D. Fabijanic, S.C. Gallo, M. Leary, M. Easton, M. Brandt, The effect of heat treatment on the abrasive and erosive wear behaviour of laser metal deposited Fe–28Cr–2.7C alloy. Wear 458–459, 203410 (2020). https://doi.org/10.1016/j.wear.2020.203410.10.1016/j.wear.2020.203410 ↗
33. F. Cucinotta, L. Scappaticci, F. Sfravara, F. Morelli, F. Mariani, M. Varani, M. Mattetti, On the morphology of the abrasive wear on ploughshares by means of 3D scanning. Biosyst. Eng. 179, 117–125 (2019). https://doi.org/10.1016/j.biosystemseng.2019.01.00610.1016/j.biosystemseng.2019.01.006 ↗
34. S. Natarajan, E.E. Anand, K.S. Akhilesh, A. Rajagopal, P.P. Nambiar, Effect of graphite addition on the microstructure, hardness and abrasive wear behavior of plasma sprayed NiCrBSi coatings. Mater. Chem. Phys. 175, 100–106 (2016). https://doi.org/10.1016/j.matchemphys.2016.02.07610.1016/j.matchemphys.2016.02.076 ↗
35. R. Lal, D.C. Reicosky, J.D. Hanson, Evolution of the plow over 10,000 years and the rationale for no-till farming. Soil Till. Res. 93, 1–12 (2007). https://doi.org/10.1016/j.still.2006.11.00410.1016/j.still.2006.11.004 ↗
36. J.L. Zhou, D.J. Kong, Immersion corrosion and electrochemical performances of laser cladded FeSiB, FeSiBCr and FeSiBCrMo coatings in 3.5 wt% NaCl solution, Surf. Coat. Technol. 383, 125229 (2020). https://doi.org/10.1016/j.surfcoat.2019.125229.10.1016/j.surfcoat.2019.125229 ↗
37. X. Xu, H.F. Lu, K.Y. Luo, J.H. Yao, L.Z. Xu, J.Z. Lu, Y.F. Lu, Mechanical properties and electrochemical corrosion resistance of multilayer laser cladded Fe-based composite coatings on 4Cr5MoSiV1 steel. J. Mater. Process. Technol. 284, 116736 (2020). https://doi.org/10.1016/j.jmatprotec.2020.11673610.1016/j.jmatprotec.2020.116736 ↗