journal article·2020-09

Bismuth (III) oxide/polyethylene terephthalate nanocomposite fiber coated polyester spunbonds for ionizing radiation protection

Hayriye Hale Aygün, Mehmet Hakkı Alma

Applied Physics A· Volume 126· Issue 9
Publisher page

Abstract

Conventional radiation-shielding aprons are uncomfortable and heavy for medical staff working at radio diagnostic areas. By virtue of manufacturing functional textile surfaces with high-radiation protection efficiency, these disadvantages of shielding garments can be eliminated. The aim of this study is production of a lightweight and comfortable textile-based shielding surface against ionizing radiation. In this paper, bismuth (III) oxide (Bi2O3) powder and polyethylene terephthalate (PET) polymer were used for coating polyester (PES) spunbond by electrospinning technology. Morphological properties were examined with SEM, EDX and FT-IR tests and thickness of samples were measured. X-ray characteristics of coated PES spunbonds were investigated by commercial computed tomography unit and electrometer. According to values read by electrometer, linear attenuation coefficient, thickness for half value layer (HVL) and tenth-value layer (TVL) and shielding performance of different amount of Bi2O3 loaded samples were calculated with corresponding formulas. Results showed that ionizing radiation shielding performance of Bi2O3/PET nanocomposite fiber-coated PES spunbonds were better than that of undoped PET nanofibers coated ones. X-ray attenuation increased with increase of Bi2O3 loading. Bi2O3/PET nanocomposite fiber-coated PES spunbonds with their multilayered forms are alternative promising surfaces for production of wearable shielding garments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Radiation Shielding Materials Analysis · Polymer Nanocomposite Synthesis and Irradiation · Graphite, nuclear technology, radiation studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. G. Russo, G. Lamberti, J. Appl. Polym. Sci. 122, 6 (2011)10.1002/app.34764 ↗
2. M. Faccini, C. Vaquero, D. Amantia, J. Nanomater. 2012, 2 (2012)10.1155/2012/892894 ↗
3. R. Rajeswari, V.J. Reddy, S. Subramanian, M. Shayanti, S. Radhakrishnan, R. Seeram, Nanotechnology 23, 38 (2012)
4. Y.K. Fuh, L.C. Lien, Nanotechnology, 24, 5 (2013)
5. H. Storrie, D. J. Mooney, J. Adv. Drug Deliv. Rev. 58, 4 (2006)10.1016/j.addr.2006.03.004 ↗
6. D.G. Yu, L.M. Zhu, K. White, C. Branford-White, Health 1, 2 (2009)10.4236/health.2009.11002 ↗
7. N.Z. Noor Azman, S.A. Siddiqui, R. Hart, I.M. Low, Appl. Radiat. Isot. 71, 62 (2013)10.1016/j.apradiso.2012.09.012 ↗
8. E.W. Taylor, D.A. Cardimona, Proceedings of nanophotonics and macrophotonics for space environments, 1st edn. (SPIE, Bellingham, 2007), pp. 6713–6806
9. H. Ji, R. Zhao, N. Zhang, C. Jin, X. Lu, C. Wang, NPG Asia Mater. 10, 8 (2018)
10. H.R. Pant, M.P. Bajgai, K.T. Nam, Y.A. Seo, D.R. Pandeya, S.T. Hong, H.Y. Kim, J. Hazard. Mater. 185, 124–130 (2011)10.1016/j.jhazmat.2010.09.006 ↗
11. C. Li, S. Shu, R. Chen, B. Chen, W. Dong, J. Appl. Polym. Sci. 130, 3 (2013)
12. S. Lee, Fibers Polym. 10, 3 (2009)
13. F.J. Liu, Q.N. Cui, J.H. He, D.D. Fei, J. Nano Res. 27, 121–127 (2014)10.4028/www.scientific.net/JNanoR.27.121 ↗
14. M.M. Demir, M.A. Gulgun, Y.Z. Menceloglu, B. Erman, S.S. Abramchuk, E.E. Makhaeva, A.R. Khokhlov, V.G. Matveeva, M.G. Sulman, Macromolecules, 37, 5 (2004)10.1021/ma035163x ↗
15. F. El Haber, G. Froyer, J. Univ. Chem. Technol. Metall. 43, 3 (2008)
16. B. Shanshan, S.H. Jayaram, E.A. Cherney, Use of electrospinning to disperse nanosilica into silicone rubber. 2010 Annual report conference on electrical ınsulation and dielectic phenomena, IEEE, West Lafayette, pp 1–4 2010
17. M.Z. Botelho, R. Kunzel, E. Okuno, R.S. Levenhagen, T. Basegio, C.P. Bergmann, Appl. Radiat. Isotopes, 69, 2 (2011)10.1016/j.apradiso.2010.11.002 ↗
18. S.C. Kim, K.R. Dong, W.K. Chung, J. Korean Phys. Soc. 60, 1 (2012)10.3938/jkps.60.1 ↗
19. H. Cetin, A. Yurt, S. Haznacı Yüksel, Radiat. Prot. Dosim. 174, 4 (2016)
20. V.S. Ivanov, Radiation chemistry of polymers, 1st edn. (VSP Publishing, Utrecht, 1992), pp. 197–204
21. J.G. Drobny, Ionizing radiation and polymers: principles, technology, and applications, 1st edn. (William Andrew Publishing, Amsterdam, 2012), pp. 213–218
22. C.A. Hampel, The encyclopedia of the chemical elements, 1st edn. (Reinhold Book Corporation, New York, 1968), pp. 706–711
23. L. Zhang, Y. Hashimoto, T. Taishi, I. Nakamura, Q.Q. Ni, Appl. Surf. Sci. 257, 15 (2011)
24. N. Chanthima, J. Kaekwkhao, C. Kedkaew, W. Chewpraditkul, A. Pokaipisit, P. Limsuwan, Prog. Nucl. Sci. Technol. 1, 106–109 (2011)10.15669/pnst.1.106 ↗
25. D.I. Tishkevich, S.S. Grabchikov, S.B. Lastovskii, S.V. Trukhanov, T.I. Zubar, D.S. Vasin, A.V. Trukhanov, J. Alloy. Compd. 749, 1036–1042 (2018)10.1016/j.jallcom.2018.03.288 ↗
26. B.M. Abunahel, I.S. Mustafa, N.Z.N. Azman, Appl. Phys. A. 124, 12 (2018)10.1007/s00339-017-1421-4 ↗
27. N.Z. Noor Azman, S.A. Siddiqui, I.M. Low, Appl. Phys. A. 110, 1 (2013)10.1007/s00339-012-7420-6 ↗
28. M.H. Hazlan, M. Jamil, R.M. Ramli, N.Z.N. Azman, Appl. Phys. A. 124, 497 (2018)10.1007/s00339-018-1915-8 ↗
29. B. Veleirinho, M.F. Rei, J.A. Lopez-Da-Silva, J. Polym. Sci. B Polym. Phys. 46, 5 (2008)10.1002/polb.21380 ↗
30. I. Akkurt, S. Emikonel, F. Akarslan, K. Gunoglu, S. Kılıcarslan, I.S. Uncu, Acta Phys. Pol. A 128, 2B (2015)
31. B. Kusuktham, C. Wichayasiri, S. Udon, J. Met. Mater. Miner. 26, 1 (2016)
32. S. Kilincarslan, I. Akkurt, I.S. Uncu, F. Akarslan, Acta Phys Pol A 129, 4 (2016)10.12693/APhysPolA.129.878 ↗
33. M.R. Ambika, N. Nagaih, Indian J. Adv. Chem. Sci. S2, 2017 (2017)
34. N. Aral, F.B. Nergis, C. Candan, Tex. Conf. 26, 2 (2016)
35. J.H. Hubbell, S.M. Seltzer, Tables of X-ray mass attenuation coefficients and mass energy absorption coefficients 1 keV to 20 MeV for elements Z = 1 to 92 and 48 additional substances of dosimetric interest. (NIST Publications, 2004). https://physics.nist.gov/PhysRefData/XrayMassCoef/cover.html. Accessed 03 May 2018.
36. P.S. Dahinde, G.P. Dapke, S.D. Raut, R.R. Bhosale, P.P. Pawar, Indian J. Sci. Res. 9, 2 (2019)
37. Z.M. Huang, Y.Z. Zhang, M. Kotaki, S. Ramakrishna, Compos. Sci. Technol. 63, 2003 (2003)10.1016/S0266-3538(03)00284-7 ↗
38. G.S. Kozanoglu, Elektrospinning yöntemiyle nanolif üretim teknolojisi (İstanbul Technical University, İstanbul, 2006), pp. 35–71
39. V. Gruver, D. Showers, M.Y. Kao, L. Klebanov, The determination of PET crystinallity by different analytical techniques, SPE/ANTEC 2000 proceedings annual technical conference papers (CRC Press, Orlando, 2000), pp. 1636–1640
40. D.M. Martin, M.M. Ahmed, M. Rodriguez, M.A. Garcia, M. Faccini, Materials (Basel) 10, 12 (2017)10.3390/ma10010012 ↗
41. E. Esmaeili, F. Deymeh, S.A. Rounaghi, Int. J. Nano Dimens. 8, 2 (2017)
42. H. Eder, Lead substitute material for radiation protection purposes, US Patent 7041995 B2, May 9 (2006)
43. J.P. McCaffrey, H. Shen, B. Downton, E. Mainegra-Hing, Med. Phys. 34, 2 (2007)10.1118/1.2426404 ↗
44. H. Eder, Lead-free, radiation protection material comprising at least two layers with different shielding characteristics. US Patents 7449705 B2, Nov 11 (2008)
45. ASTM F 2547–06, Standard Test method for determining the attenuation properties in a primary x-ray beam of materials used to protect against radiation generated during the use of x-ray equipment, (2006)
46. DIN 6857–1, Radiation protection accessories for medical use of x-radiation, (2009)
47. J.P. McCaffrey, E. Mainegra-Hing, H. Shen, Med. Phys. 36, 12 (2009)10.1118/1.3260839 ↗