Study on a multifield coupling mechanism and a numerical simulation method of a pulsed laser deposition process from a disk laser
Source abstract
Abstract
Pulsed laser deposition produces heat in an alternating fashion, which allows for more cooling time and accumulates significantly less heat than continuous laser deposition. This is conducive to heat dissipation, leading to the formation of a larger temperature gradient in the cladding layer, a fine-grained structure and good mechanical properties. There are extremely complex heat transfer and thermal-elastic–plastic-flow coupling changes that occur during a pulsed laser deposition process from a disk laser. Quantitatively revealing the multifield coupling mechanism in a pulsed laser deposition process is a key to process optimization. In this paper, a numerical model of pulsed laser deposition from a disk laser was established for cladding Fe60 powder on an ASTM 1045 matrix. In the model, the interactions between the powder flow and the pulse laser beam and the influence of surface tension and buoyancy on the Marangoni fluid flow in the molten pool were considered. The model was solved, and the distribution states and evolution laws were obtained for the temperature, velocity, and stress fields in the pulsed laser deposition process. On this basis, a comparative analysis of pulsed laser cladding and continuous laser cladding was carried out from the perspective of numerical simulations and experiments, revealing the influence of pulse parameters on the multiphysics of laser cladding. The microstructure of the pulsed cladding specimen was analyzed by a Zeiss-ƩIGMA HD field emission-scanning electron microscope. The experimental results were in good agreement with the calculated results, and the accuracy of the model was verified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Gnanamuthu D S.High temperature coatings by surface melting [P]. U S.3952180, 1976, 4, 8.
2. E. Toyserkani, A. Khajepour, S. Corbin, 3-D finite element modeling of laser cladding by powder injection: effects of laser pulse shaping on the process[J]. Opt. Lasers Eng. 41, 849–867 (2004)10.1016/S0143-8166(03)00063-0 ↗
3. L.F. Guo, T.M. Yue, H.C. Man, A numerical model for studying laser cladding under pulse mode[J]. Lasers in Engineering 22, 209–225 (2012)
4. F.M. AmirrezaFarnia, J.S. Ghaini, Effects of pulse duration and overlapping factor on melting ratio in preplaced pulsed Nd:YAG laser cladding[J]. Opt. Lasers Eng. 51(1), 69–76 (2013)10.1016/j.optlaseng.2012.07.015 ↗
5. SM Li, H Xiao, KY Liu, WJ Xiao, YQ Li, X Han, Mazumder JT, Song LJ. Melt-pool motion, temperature variation and dendritic morphology of Inconel 718 during pulsed-and continuous-wave laser additive manufacturing: A comparative study[J]. Materials & design, 2017, 119: 351–360.10.1016/j.matdes.2017.01.065 ↗
6. Y. Zhang, L. Yang, J. Dai, J. Liu, W. Zhang, H. Chen, Z. Wang, K. Shi, Microstructure and mechanical properties of pulsed laser cladded IN718 alloy coating[J]. Surf. Eng. 34(4), 259–266 (2018)10.1080/02670844.2016.1200847 ↗
7. F. Ehsan, K. Radovan et al., Effect of path planning on the laser powder deposition process: thermal and structural evaluation[J]. The international journal of advanced manufacturing technology 51, 659–669 (2010)10.1007/s00170-010-2659-6 ↗
8. P. Farahmand, R. Kovacevic, An experimental-numerical investigation of heat distribution and stress field in single-and multi-track laser cladding by a high-power direct diode laser[J]. Opt. Laser Technol. 63, 154–168 (2014)10.1016/j.optlastec.2014.04.016 ↗
9. C. Li, Z.B. Yu, J.X. Gao, J.Y. Zhao, X. Han, Numerical simulation and experimental study of cladding Fe60 on an ASTM 1045 substrate by laser cladding[J]. Surf. Coat. Technol. 357, 965–977 (2019)10.1016/j.surfcoat.2018.10.099 ↗
10. Y. Javid1, M. Ghoreishi. Thermo-mechanical analysis in pulsed laser cladding of WC powder on Inconel 718[J]. International Journal of Advanced Manufacturing Technology, 2017, 92: 69–792017.10.1007/s00170-017-0117-4 ↗
11. S. Asai, I. Muchi, Theoretical analysis and model experiments on the formation mechanism of channel-type segregation[J]. Transactions of the Iron and Steel Institute of Japan 18, 90–981 (1978)10.2355/isijinternational1966.18.90 ↗
12. W.D. Bennon, F.P. Incropera, A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems-I Model formulation[J]. Int. J. Heat Mass Transf. 30, 2161–2170 (1987)10.1016/0017-9310(87)90094-9 ↗
13. W D Bennon, F P Incropera. A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems—II. Application to solidification in a rectangular cavity[J]. International Journal of Heat and Mass Transfer, 1987, 30(10):2171–2187.10.1016/0017-9310(87)90095-0 ↗
14. X. He, J. Mazumder, Transport phenomena during direct metal deposition[J]. J. Appl. Phys. 101, 053113 (2007)10.1063/1.2710780 ↗
15. Z. Liu, H. Qi, Numerical simulation of transport phenomena for a double-layer laserpowder deposition of single-crystal superalloy[J]. Metallurgical and Materials Transactions A 45, 1903–1915 (2014)10.1007/s11661-013-2178-9 ↗
16. A. M. Deus, R. Vilar. One-Dimensional Thermal Model Including the Dependence of Absorptivity on Temperature using Hagen-Rubens Equation[J]. 1996.10.1007/978-94-009-0197-1_10 ↗
17. Z.T. Gan, G. Yu, X.L. He, S.X. Li, Numericalsimulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel[J]. Int. J. Heat Mass Transf. 104, 28–38 (2017)10.1016/j.ijheatmasstransfer.2016.08.049 ↗
18. X. He, L. Song, G. Yu, Solute transport and composition profile during direct metal deposition with coaxial powder injection[J]. Appl. Surf. Sci. 258, 898–907 (2011)10.1016/j.apsusc.2011.09.023 ↗
19. S. Morville, M. Carin, P. Peyre, 2D longitudinal modeling of heat transfer and fluid flow during multilayered direct laser metal deposition process. Journal of laser applications 24, 032008 (2012)10.2351/1.4726445 ↗
20. X He, J Mazumder. Transport phenomena during direct metal deposition[J]. Journal of applied physics.2007, 101: 053–113.10.1063/1.2710780 ↗
21. H. Qia, J. Mazumder, Numerical simulation of heat transfer and fluid flow in coaxial laser cladding process for direct metal deposition. J. Appl. Phys. 100, 024903 (2006)10.1063/1.2209807 ↗
22. Y. Gong, C. Hyde, W. Sun, T. Hyde, Determination of Material Parameters in the Chaboche Unified Viscoplasticty Model[J]. Applied Mechanics and Materials 16–19, 955–959 (2009)10.4028/www.scientific.net/AMM.16-19.955 ↗
23. C.J. Hyde, W. Sun, S.B. Leen, Cyclic thermo-mechanical material modelling and testing of 316 stainless steel[J]. Int. J. Press. Vessels Pip. 87, 365–372 (2010)10.1016/j.ijpvp.2010.03.007 ↗
24. A. Bahrami, B.T. Helenbrook, D.T. Valentine, Fluid flow and mixing in linear GTA welding of dissimilar ferrous alloys[J]. Int. J. Heat Mass Transf. 93, 729–741 (2016)10.1016/j.ijheatmasstransfer.2015.10.058 ↗
25. C. Zhang, J. Miao, S. Chen et al., CALPHAD-Based Modeling and Experimental Validation of Microstructural Evolution and Microsegregation in Magnesium Alloys During Solidification[J]. Journal of Phase Equilibria and Diffusion 40(4), 495–507 (2019)10.1007/s11669-019-00732-0 ↗
26. W. Gao, S. Zhao, Y. Wang, Numerical simulation of thermal field and Fe based coating doped Ti[J]. Int. J. Heat Mass Transf. 92, 83–90 (2016)10.1016/j.ijheatmasstransfer.2015.08.082 ↗
27. Picasso, Hoadley M. Finite element simulation of laser surface treatment including convection in the melt pool[J]. Heat Fluid Flow, 1994, 4(1): 61- 83.10.1108/EUM0000000004031 ↗
28. KhajepourAmir ToyserkaniEhsan, CorbinSteve, , Three- dimensional finite element modeling of laser cladding by powder injection: Effects of powder feed rate and travel speed on the process[J]. Laser Institute of America 8, 153–160 (2003)
29. Z. Gan, Yu. Gang, X. He, S. Li, Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel[J]. Int. J. Heat Mass Transf. 104, 28–38 (2017)10.1016/j.ijheatmasstransfer.2016.08.049 ↗
30. Lugscheider E, H Bolender, H Kvappitz. Laser Cladding of Paste Bound Hardfacing Alloys[J].Surface Engineering, 1991, 7(4): 341–346.10.1179/sur.1991.7.4.341 ↗
31. Fellows F C D, Steen W M, Coley K S.In Proc. 20d Int. Seminar on Surface Engineering with High Density Beams[D]. Contre of Mechanics and Materials of the Technical University of Lisbon, Lisbon, 1989: 435–446.
32. W. Fuyu, L. Weijun, Z. Yuhui, Thermo-mechanical coupling field simulation of complex thin-wall part laser rapid prototype process[J]. Journal of mechanical engineering 49(5), 192–198 (2013)
33. Long Risheng, Liu Weijun, BianHongyou. Effects of scanning methods on thermal stress during laser metal deposition shaping[J]. Chinese journal of mechanical engineering, 2007,43(11):74–81.10.3901/JME.2007.11.074 ↗
34. Chen Xiaoming, Wang Haijin, Zhou Xialiang. Laser surface modification technology and research progress[J]. Laser Surface Modification Technology and its Research Progress[A]. Material Guide, 2018,32(31): 341–344. (in Chinese)
35. LReddy, SPPreston, PHShipway, CDavis, THussain. Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution[J]. Surface and Coatings Technology, 2018, 349: 198–207.10.1016/j.surfcoat.2018.05.054 ↗