Effect of grinding depths on SiC nanogrinding behavior based on molecular dynamics
Source abstract
Abstract
In this paper, the nanogrinding process of single-crystal silicon carbide is studied with molecular dynamics. By changing the grinding depth, we analyze the atomic Y direction displacement, crystal defect, force, von Mises stress and the wear of abrasive. We found that with the increase in grinding depth, the atomic Y direction displacement, crystal defect, force and the wear of abrasive are gradually increasing. When the grinding depth is 3 nm, serious plastic deformation occurs. The deformation of the substrate extends in the Z direction. In addition, the maximum value of von Mises stress is fluctuating. These results provide some theoretical support for the study of mechanical properties of single-crystal silicon carbide.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. S. Sundararajan, B. Bhushan, Micro/nanotribological studies of polysilicon and sic films for mems applications. Wear 217(2), 251–261 (1998) https://doi.org/10.1016/S0043-1648(98)00169-0. https://www.sciencedirect.com/science/article/pii/S004316489800169010.1016/S0043-1648(98)00169-0 ↗
2. D.C. Lim, H.G. Jee, J. Kim, J.S. Moon, S.B. Lee, S. Choi, J.H. Boo, Deposition of epitaxial silicon carbide films using high vacuum mocvd method for mems applications. Thin Solid Films 459(1), 7–12 (2004). https://doi.org/10.1016/j.tsf.2003.12.140. https://www.sciencedirect.com/science/article/pii/S0040609003020121. Proceedings of the 8th European Vacuum Congress Berlin 2003, 23-26 June 2003, featuring the 8th European Vacuum Conference and 2nd Annual Conference of the German Vaccum Society10.1016/j.tsf.2003.12.140 ↗
3. Q.S. Yan, S.K. Chen, J.S. Pan, J.B. Lu, Q. Liu, Surface and subsurface damage characteristics and material removal mechanism in 6h-sic wafer grinding. Mater. Res. Innov. 18(sup2), S2–742–S2–747 (2014). https://doi.org/10.1179/1432891714Z.00000000052210.1179/1432891714Z.000000000522 ↗
4. J. Pan, X. Zhang, Q. Yan, S. Chen, Experimental study of surface performance of monocrystalline 6h-sic substrates in plane grinding with a metal-bonded diamond wheel. Int. J. Adv. Manuf. Technol. 89, 619–627 (2017) https://doi.org/10.1007/s00170-016-9095-1. https://link.springer.com/article/10.1007/s00170-016-9095-1. https://link.springer.com/article/10.1007%2Fs00170-016-9095-1#citeas10.1007/s00170-016-9095-1 ↗
5. K. Yamaguchi, M. Touge, T. Nakano, J. Watanabe, in Advances in Abrasive Technology XII, Advanced Materials Research, vol. 76 (Trans Tech Publications Ltd, 2009), pp. 282–287. https://doi.org/10.4028/www.scientific.net/AMR.76-78.28210.4028/www.scientific.net/AMR.76-78.282 ↗
6. F. wei HUO, D. ming GUO, R. ke KANG, G. FENG, Nanogrinding of sic wafers with high flatness and low subsurface damage. Trans. Nonferrous Met. Soci. China 22(12), 3027–3033 (2012). https://doi.org/10.1016/S1003-6326(11)61566-5. https://www.sciencedirect.com/science/article/pii/S100363261161566510.1016/S1003-6326(11)61566-5 ↗
7. L. Liu, Z. Xu, D. Tian, A. Hartmaier, X. Luo, J. Zhang, K. Nordlund, F. Fang, (2019), pp. 686–691. https://doi.org/10.1108/ILT-03-2019-0096. https://www.emerald.com/insight/content/doi/10.1108/ILT-03-2019-0096/full/html10.1108/ILT-03-2019-0096 ↗
8. B. Liu, Z. Xu, Y. Wang, X. Gao, R. Kong, Effect of ion implantation on material removal mechanism of 6h-sic in nano-cutting: A molecular dynamics study. Comput. Mater. Sci. 174, 109,476 (2020). https://doi.org/10.1016/j.commatsci.2019.109476. https://www.sciencedirect.com/science/article/pii/S092702561930775X10.1016/j.commatsci.2019.109476 ↗
9. S.Z. Chavoshi, X. Luo, Molecular dynamics simulation study of deformation mechanisms in 3c-sic during nanometric cutting at elevated temperatures. Mater. Sci. Eng.: A 654, 400–417 (2016) https://doi.org/10.1016/j.msea.2015.11.100. https://www.sciencedirect.com/science/article/pii/S092150931530682110.1016/j.msea.2015.11.100 ↗
10. L.N. Abdulkadir, K. Abou-El-Hossein, Diamond tool wear mode, path and tip temperature distribution considering effect of varying rake angle and duncut/redge ratio. Surf. Topogr.: Metrol. Prop. 7(2), 025,011 (2019). https://doi.org/10.1088/2051-672x/ab0fb710.1088/2051-672x/ab0fb7 ↗
11. B. Meng, P. Qiu, D. Yuan, S. Xu, Influence of microstructure on the diamond-machinability of hot-pressed silicon carbide: A molecular dynamics study. Ceram. Int. 45(17, Part B), 22,872–22,879 (2019). https://doi.org/10.1016/j.ceramint.2019.07.330. https://www.sciencedirect.com/science/article/pii/S027288421932155810.1016/j.ceramint.2019.07.330 ↗
12. B. Zhu, D. Zhao, Y. Tian, S. Wang, H. Zhao, J. Zhang, Study on the deformation mechanism of spherical diamond indenter and its influence on 3c-sic sample during nanoindentation process via molecular dynamics simulation. Mater. Sci. Semicond. Process. 90, 143–150 (2019) https://doi.org/10.1016/j.mssp.2018.10.016. https://www.sciencedirect.com/science/article/pii/S136980011831434310.1016/j.mssp.2018.10.016 ↗
13. Z. Wu, W. Liu, L. Zhang, S. Lim, Amorphization and dislocation evolution mechanisms of single crystalline 6h-sic. Acta Materialia 182, 60–67 (2020) https://doi.org/10.1016/j.actamat.2019.10.037. https://www.sciencedirect.com/science/article/pii/S135964541930699810.1016/j.actamat.2019.10.037 ↗
14. C. Pan, L. Zhang, W. Jiang, W. Setyawan, L. Chen, Z. Li, N. Liu, T. Wang, Grain size dependence of hardness in nanocrystalline silicon carbide. J. Eur. Ceram. Soci. 40(13), 4396–4402 (2020) https://doi.org/10.1016/j.jeurceramsoc.2020.05.060. https://www.sciencedirect.com/science/article/pii/S095522192030426X10.1016/j.jeurceramsoc.2020.05.060 ↗
15. P. Zhou, Y. Zhu, T. Sun, L. Lin, J. Li, Z. Wang, X. Li, Stress-induced structural phase transition of 3c-sic with tlk structure in a nano-abrading process. Mater. Sci. Semicond. Process. 112, 104,893 (2020). https://doi.org/10.1016/j.mssp.2019.104893. https://www.sciencedirect.com/science/article/pii/S136980011932416310.1016/j.mssp.2019.104893 ↗
16. J. Wang, H. Chi, M. Lv, X. Liu, Y. Li, Y. Zhao, Effect of silicon carbide hard particles scratch on the diamond cutting tools groove wear. Proc. Inst Mech. Eng. Part C: J. Mech. Eng. Sci. 234(10), 2053–2063 (2020). https://doi.org/10.1177/095440621990019910.1177/0954406219900199 ↗
17. B. Meng, D. Yuan, S. Xu, Coupling effect on the removal mechanism and surface/subsurface characteristics of sic during grinding process at the nanoscale. Ceram. Int. 45(2, Part A), 2483–2491 (2019). https://doi.org/10.1016/j.ceramint.2018.10.175. https://www.sciencedirect.com/science/article/pii/S027288421832982110.1016/j.ceramint.2018.10.175 ↗
18. N. Piroozan, S. Naserifar, M. Sahimi, Sliding friction between two silicon-carbide surfaces. J. Appl. Phys. 125(12), 124,301 (2019). https://doi.org/10.1063/1.5086185. https://aip.scitation.org/doi/abs/10.1063/1.508618510.1063/1.5086185 ↗
19. J. Li, L. Dong, H. Xie, W. Meng, X. Zhang, J. Zhang, W. Zhao, Molecular dynamics simulation of nanocrack propagation mechanism of polycrystalline titanium under tension deformation in nanoscale. Mater. Today Commun. 26, 101,837 (2021). https://doi.org/10.1016/j.mtcomm.2020.101837. https://www.sciencedirect.com/science/article/pii/S235249282032848810.1016/j.mtcomm.2020.101837 ↗
20. P. Erhart, K. Albe, Analytical potential for atomistic simulations of silicon, carbon, and silicon carbide. Phys. Rev. B 71, 035,211 (2005). https://doi.org/10.1103/PhysRevB.71.035211. https://link.aps.org/doi/10.1103/PhysRevB.71.03521110.1103/PhysRevB.71.035211 ↗
21. G. Xiao, S. To, G. Zhang, Molecular dynamics modelling of brittle-ductile cutting mode transition: Case study on silicon carbide. Int. J. Mach. Tools Manuf. 88, 214–222 (2015) https://doi.org/10.1016/j.ijmachtools.2014.10.007. https://www.sciencedirect.com/science/article/pii/S089069551440012910.1016/j.ijmachtools.2014.10.007 ↗
22. P. Zhou, T. Sun, X. Shi, J. Li, Y. Zhu, Z. Wang, Atomic-scale study of vacancy defects in sic affecting on removal mechanisms during nano-abrasion process. Tribol. Int. 145, 106,136 (2020). https://doi.org/10.1016/j.triboint.2019.106136. https://www.sciencedirect.com/science/article/pii/S0301679X1930650410.1016/j.triboint.2019.106136 ↗
23. P. Zhou, X. Shi, J. Li, T. Sun, Y. Zhu, Z. Wang, J. Chen, Molecular dynamics simulation of sic removal mechanism in a fixed abrasive polishing process. Ceram. Int. 45(12), 14614–14624 (2019) https://doi.org/10.1016/j.ceramint.2019.04.180. https://www.sciencedirect.com/science/article/pii/S027288421931005310.1016/j.ceramint.2019.04.180 ↗
24. H. Talebi, M. Silani, S.P.A. Bordas, P. Kerfriden, T. Rabczuk, A computational library for multiscale modeling of material failure. Comput. Mech. 53, 1047–1071 (2014). https://doi.org/10.1007/s00466-013-0948-210.1007/s00466-013-0948-2 ↗
25. H. Talebi, M. Silani, T. Rabczuk, Concurrent multiscale modeling of three dimensional crack and dislocation propagation. Adv. Eng. Softw. 80, 82–92 (2015) https://doi.org/10.1016/j.advengsoft.2014.09.016. https://www.sciencedirect.com/science/article/pii/S0965997814001653. Civil-Comp10.1016/j.advengsoft.2014.09.016 ↗
26. G.J. Ackland, A.P. Jones, Applications of local crystal structure measures in experiment and simulation. Phys. Rev. B 73, 054,104 (2006). https://doi.org/10.1103/PhysRevB.73.054104. https://link.aps.org/doi/10.1103/PhysRevB.73.05410410.1103/PhysRevB.73.054104 ↗
27. A. Stukowski, V.V. Bulatov, A. Arsenlis, Automated identification and indexing of dislocations in crystal interfaces. Model. Simul. Mater. Sci. Eng. 20(8), 085,007 (2012). https://doi.org/10.1088/0965-0393/20/8/08500710.1088/0965-0393/20/8/085007 ↗
28. P. Zhou, J. Li, Z. Wang, J. Chen, X. Li, Y. Zhu, Molecular dynamics study of the removal mechanism of sic in a fixed abrasive polishing in water lubrication. Ceram. Int. 46(16, Part A), 24,961–24,974 (2020). https://doi.org/10.1016/j.ceramint.2020.06.282. https://www.sciencedirect.com/science/article/pii/S027288422031942810.1016/j.ceramint.2020.06.282 ↗
29. Z. Zhang, D. Guo, B. Wang, R. Kang, B. Zhang, A novel approach of high speed scratching on silicon wafers at nanoscale depths of cut. Sci. Rep. 5, 16,395 (2015). https://doi.org/10.1038/srep16395. https://www.nature.com/articles/srep1639510.1038/srep16395 ↗
30. B. Wang, Z. Zhang, K. Chang, J. Cui, A. Rosenkranz, J. Yu, C.T. Lin, G. Chen, K. Zang, J. Luo, N. Jiang, D. Guo, New deformation-induced nanostructure in silicon. Nano Lett. 18, 4611–4617 (2018) https://doi.org/10.1021/acs.nanolett.8b01910. https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.8b0191010.1021/acs.nanolett.8b01910 ↗
31. F. Klocke, R. Zunke, Removal mechanisms in polishing of silicon based advanced ceramics. CIRP Annals 58(1), 491–494 (2009) https://doi.org/10.1016/j.cirp.2009.03.120. https://www.sciencedirect.com/science/article/pii/S000785060900120610.1016/j.cirp.2009.03.120 ↗
32. V.T. Nguyen, T.H. Fang, Material removal and wear mechanism in abrasive polishing of sio2/sic using molecular dynamics. Ceram. Int. 46(13), 21578–21595 (2020) https://doi.org/10.1016/j.ceramint.2020.05.263. https://www.sciencedirect.com/science/article/pii/S027288422031577710.1016/j.ceramint.2020.05.263 ↗
33. M.L. Falk, J.S. Langer, Dynamics of viscoplastic deformation in amorphous solids. Phys. Rev. E 57, 7192–7205 (1998) https://doi.org/10.1103/PhysRevE.57.7192. https://link.aps.org/doi/10.1103/PhysRevE.57.719210.1103/PhysRevE.57.7192 ↗
34. K. Uezaki, J. Shimizu, L. Zhou, Development of metal cutting process accompanied by a localized compressive hydrostatic stress field formation: examination by molecular dynamics simulation. Precis. Eng. 38(2), 371–378 (2014) https://doi.org/10.1016/j.precisioneng.2013.12.002. https://www.sciencedirect.com/science/article/pii/S014163591300186410.1016/j.precisioneng.2013.12.002 ↗
35. S. Goel, X. Luo, A. Agrawal, R.L. Reuben, Diamond machining of silicon: a review of advances in molecular dynamics simulation. Int. J. Mach. Tools Manuf. 88, 131–164 (2015) https://doi.org/10.1016/j.ijmachtools.2014.09.013. https://www.sciencedirect.com/science/article/pii/S089069551400145X10.1016/j.ijmachtools.2014.09.013 ↗
36. B. Meng, D. Yuan, J. Zheng, P. Qiu, S. Xu, Tip-based nanomanufacturing process of single crystal sic: ductile deformation mechanism and process optimization. Appl. Surf. Sci. 500, 144,039 (2020). https://doi.org/10.1016/j.apsusc.2019.144039. https://www.sciencedirect.com/science/article/pii/S016943321932855710.1016/j.apsusc.2019.144039 ↗