Experimental study on the effect of the riveting process on the bending resistance of beams composed of galvanized Q235 steel
Source abstract
Abstract
Abstract In this article, a hollow flange beam (ARHFB) composed of self-piercing rivet (SPR) and galvanized steel sheet was proposed, and the process parameters and mechanical properties of SPR connection technology for Q235 galvanized steel sheet were studied. Through the Taguchi method tests, the thickness of the joint section and the interlocking depth were measured. The tensile and shear tests were carried out, respectively, to obtain the corresponding quasi-static curves. In the four-point bending experiment of ARHFB, the effects of connection including welding, self-tapping screw, and SPR on the bending resistance of ARHFB were compared. The bearing capacity of ARHFB with self-tapping screws is significantly lower than that of welded ARHFB, and the 100 mm spacing SPR connection has strong substitutability for welding.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Mechanical stress and fatigue analysis · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering and Architecture, Jiangsu University of Science and Technology , Zhenjiang , Jiangsu, 212100 , China
Zhenjiang University Park Headquarters , Zhenjiang , Jiangsu , China
Plais Precision Technology Co., Ltd., Guangdong , Shenzhen , China
Zhenjiang Engineering Survey and Design Institute Co, Ltd. , Zhenjiang , Jiangsu, 212003 , China
School of Civil Engineering, Yancheng Institute of Technology , Yancheng , Jiangsu, 22400 , China
References (10)
Show source-provided references
1. Roche, P. G., S. Wohletz, M. Brenneis, C. Pabst, and F. Resch. Joining by forming – a review on joint mechanisms, applications and future trends. Journal of Materials Processing Technology, Vol. 214, 2014, id. 1972.10.1016/j.jmatprotec.2013.12.022 ↗
2. Mori, K. I., N. Bay, L. Fratini, F. Micari and A. E. Tekkaya. Joining by plastic deformation. CIRP Annals, Vol. 62, 2013, id. 673.10.1016/j.cirp.2013.05.004 ↗
3. Yan, W. M., T. T. Mu, Z. Q. Xie, and L. L. Song. Four kinds of connections in assembled cold-formed thin-walled steel structures. Experimental study on shear performance. Chinese Journal of Beijing University of Technology, Vol. 8, 2018, id. 1099.
4. Davies, J. M. Recent research advances in cold-formed steel structures. Journal of Constructional Steel Research, Vol. 55, 2000, id. 267.10.1016/S0143-974X(99)00089-9 ↗
5. Keerthan, P., M. Mahendran, and S. Wanniarachchi. Experimental shear study of rivet-fastened rectangular hollow flange channel beams with web openings. Journal of Structural Engineering, Vol. 144, 2018, id. 04018020.10.1061/(ASCE)ST.1943-541X.0001957 ↗
6. Siahaan, R., P. Keerthan, and M. Mahendran. Lateral distortional buckling of rivet fastened rectangular hollow flange channel beams. Journal of Constructional Steel Research, Vol. 144, 2018, id. 295.10.1016/j.jcsr.2018.01.003 ↗
7. Siahaan, R., P. Keerthan, and M. Mahendran. Finite element modeling of rivet fastened rectangular hollow flange channel beams subject to local buckling. Engineering Structures, Vol. 126, 2016, id. 311.10.1016/j.engstruct.2016.07.004 ↗
8. Siahaan, R., P. Keerthan, and M. Mahendran. Section moment capacity tests of rivet fastened rectangular hollow flange channel beams. Journal of Constructional Steel Research, Vol. 125, 2016, id. 252.10.1016/j.jcsr.2016.06.021 ↗
9. Siahaan, R., P. Keerthan, and M. Mahendran. Section moment capacity design rules for rivet fastened rectangular hollow flange channel beams. Thin-Walled Structures, Vol. 127, 2018, id. 781.10.1016/j.tws.2018.02.013 ↗
10. Gong, Y. L., J. P. Chen, and J. Liu. Experimental study on the effect of riveting process on corrosion resistance of galvanized sheet. Chinese Journal of Electrical Engineering and Technology, Vol. 51, 2022, id. 91.