Modulation of dry tribological property of stainless steel by femtosecond laser surface texturing
Source abstract
Abstract
We reported on the modification of tribological properties of stainless steel by femtosecond laser surface microstructuring. Regular arranged micro-grooved textures with different spacing were produced on the AISI 304L steel surfaces by an 800-nm femtosecond laser. The tribological properties of smooth surface and textured surface were investigated by carrying out reciprocating ball-on-flat tests against Al2O3 ceramic balls under dry friction. Results show that the spacing of micro-grooves had a significant impact on friction coefficient of textured surfaces. Furthermore, the wear behaviors of smooth and textured surface were also investigated. Femtosecond laser surface texturing had a marked potential for modulating friction and wear properties if the micro-grooves were distributed in an appropriate manner.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Adhesion, Friction, and Surface Interactions · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. D.B. Hamilton, J.A. Walowit, C.M. Allen, A theory of lubrication by microirregularities. J. Fluids Eng. 88(1), 177–185 (1966)
2. L.M. Vihena, M. Sedlacek, B. Podgornik, Surface texturing by pulsed Nd: YAG laser. Tribol. Int. 42(10), 1496–1504 (2009)10.1016/j.triboint.2009.06.003 ↗
3. Y.Q. Xing, J.X. Deng, Z. Wu, H.W. Cheng, Effect of regular surface textures generated by laser on tribological behavior of Si3N4/TiC ceramic. Appl. Surf. Sci. 265, 823–832 (2013)10.1016/j.apsusc.2012.11.127 ↗
4. R. Bathe, V.S. Krishna, S.K. Nikumb, Laser surface texturing of gray cast iron for improving tribological behavior. Appl. Phys. A 117(1), 117–123 (2014)10.1007/s00339-014-8281-y ↗
5. G. Dumitru, V. Romano, Y. Gerbig, H.P. Weber, H. Haefke, Femtosecond laser processing of nitride-based thin films to improve their tribological performance. Appl. Phys. A 80(2), 283–287 (2005)10.1007/s00339-003-2349-4 ↗
6. E. Gualtieri, A. Borghi, L. Calabri, N. Pugno, S. Valeri, Increasing nanohardness and reducing friction of nitride steel by laser surface texturing. Tribol. Int. 42(5), 699–705 (2009)10.1016/j.triboint.2008.09.008 ↗
7. A. Kovalchenko, O. Ajayi, A. Erdemir, G. Fenske, I. Etsion, The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic. Tribol. Trans. 47(2), 299–307 (2004)10.1080/05698190490440902 ↗
8. H.L. Costa, I.M. Hutchings, Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribol. Int. 40(8), 1227–1238 (2007)10.1016/j.triboint.2007.01.014 ↗
9. Y. Wan, D.S. Xiong, The effect of laser surface texturing on frictional performance of face seal. J. Mater. Process. Technol. 197(1–3), 96–100 (2008)10.1016/j.jmatprotec.2007.06.019 ↗
10. Y. Feldman, Y. Kligerman, I. Etsion, A hydrostatic laser surface textured gas seal. Tribol. Lett. 22(1), 21–28 (2006)10.1007/s11249-006-9066-z ↗
11. X.Q. Yu, S. He, R.L. Cai, Frictional characteristic of mechanical seals with a laser-textured seal face. J. Mater. Process. Technol. 129(1–3), 463–466 (2002)
12. G. Ryk, I. Etsion, Testing piston rings with partial laser surface texturing for friction reduction. Wear 261(7–8), 792–796 (2006)10.1016/j.wear.2006.01.031 ↗
13. S. Mezghani, I. Demirci, M. Yousfi, M.E.I. Mansori, Mutual influence of crosshatch angle and superficial toughness of honed surfaces on friction in ring-pack tribo-system. Tribol. Int. 66, 54–59 (2013)10.1016/j.triboint.2013.04.014 ↗
14. Z. Wu, J.X. Deng, Y. Chen, Y.Q. Xing, J. Zhao, Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V. Int. J. Adv. Manu. Technol. 62(9–12), 943–951 (2012)
15. J.X. Deng, Z. Wu, Y.S. Lian, T. Qi, J. Cheng, Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes. Int. J. Refract. Metals Hard Mater. 30(1), 164–172 (2012)10.1016/j.ijrmhm.2011.08.002 ↗
16. T. Sugihara, T. Enomoto, Crater and flank wear resistance of cutting tools having micro textured surfaces. Precis. Eng. 37(4), 888–896 (2013)10.1016/j.precisioneng.2013.05.007 ↗
17. I. Etsion, G. Halperin, V. Brizmer, Y. Kligerman, Experimental investigation of laser surface textured parallel thrust bearings. Tribol. Lett. 17(2), 295–300 (2004)10.1023/B:TRIL.0000032467.88800.59 ↗
18. V. Brizmer, Y. Kligerman, I. Etsion, A laser surface textured parallel thrust bearing. Tribol. Trans. 46(3), 397–403 (2003)10.1080/10402000308982643 ↗
19. B. Bhushan, Nanotribology and nanomechanics in nano/biotechnology. Philos. Trans. R. Soc. A 366(1870), 1499–1537 (2008)10.1098/rsta.2007.2170 ↗
20. M. Palacio, B. Bhushan, Ultrathin wear-resistant ionic liquid films for novel MEMS/NEMS application. Adv. Mater. 20(6), 1194–1198 (2008)10.1002/adma.200702006 ↗
21. J.J. Rha, S.C. Kwon, J.R. Cho, S. Yim, N. Saka, Creation of ultra-low friction and wear surfaces for micro-devices using carbon films. Wear 259(1–6), 765–770 (2005)10.1016/j.wear.2005.02.084 ↗
22. U. Pettersson, S. Jacobson, Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors. Tribol. Int. 40(2), 355–359 (2007)10.1016/j.triboint.2005.11.024 ↗
23. U. Pettersson, S. Jacobson, Influence of surface texture on boundary lubricated sliding contacts. Tribol. Int. 36(11), 857–864 (2003)10.1016/S0301-679X(03)00104-X ↗
24. X. Wang, K. Kato, Improving the anti-seizure ability of SiC seal in water with RIE texturing. Tribol. Lett. 14(4), 275–280 (2002)10.1023/A:1022650813314 ↗
25. D.Q. He, S.X. Zheng, J.B. Pu, G.G. Zhang, L.T. Hu, Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film. Tribol. Int. 82, 20–27 (2015)10.1016/j.triboint.2014.09.017 ↗
26. P. Andersson, J. Koskinen, S. Varjus, Y. Gerbig, H. Haefke, S. Georgiou, B. Zhmud, W. Buss, Microlubrication effect by laser-textured steel surfaces. Wear 262(3–4), 369–379 (2007)10.1016/j.wear.2006.06.003 ↗
27. D.Z. Segu, S.G. Choi, J.H. Choi, S.S. Kim, The effect of multi-scale laser textured surface on lubrication regime. Appl. Surf. Sci. 270, 58–63 (2013)10.1016/j.apsusc.2012.12.068 ↗
28. I. Etsion, State of the art in laser surface texturing. J. Tribol. Trans. ASME 127(1), 248–253 (2005)10.1115/1.1828070 ↗
29. N. Tagawa, M. Takada, A. Mori, H. Sawada, K. Kawahara, Development of contact sliders with nanotextures by femtosecond laser processing. Tribol. Lett. 24(2), 143–149 (2006)10.1007/s11249-006-9142-4 ↗
30. N. Yasumaru, K. Miyazaki, J. Kiuchi, Control of tribological properties of diamond-like carbon films with femtosecond-laser-induced nanostructuring. Appl. Surf. Sci. 254(8), 2364–2368 (2008)10.1016/j.apsusc.2007.09.037 ↗
31. N. Kawasegi, H. Sugimori, H. Morimoto, N. Morita, I. Hori, Development of cutting tools with microscale and nanoscale textures to improve friction behavior. Precis. Eng. 33(3), 248–254 (2009)10.1016/j.precisioneng.2008.07.005 ↗
32. J.X. Deng, Y.S. Lian, Z. Wu, Y.Q. Xing, Performance of femtosecond laser-textured cutting tools deposited with WS2 solid lubricant coatings. Surf. Coat. Technol. 222, 135–143 (2013)10.1016/j.surfcoat.2013.02.015 ↗
33. U. Pettersson, S. Jacobson, Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated sliding. Tribol. Lett. 17(3), 553–559 (2004)10.1023/B:TRIL.0000044504.76164.4e ↗
34. S.H. Yuan, W. Huang, X.L. Wang, Orientation effects of micro-grooves on sliding surfaces. Tribol. Int. 44(9), 1047–1054 (2011)10.1016/j.triboint.2011.04.007 ↗
35. Y.Q. Xing, J.X. Deng, X.T. Feng, S. Yu, Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction. Mater. Des. 52, 234–245 (2013)10.1016/j.matdes.2013.05.077 ↗
36. H. Tian, N. Saka, N.P. Suh, Boundary lubrication studies on undulated titanium surfaces. Tribol. Trans. 32(3), 289–296 (1989)10.1080/10402008908981891 ↗
37. N.P. Suh, H.C. Sin, The genesis of friction. Wear 69(1), 91–114 (1981)10.1016/0043-1648(81)90315-X ↗
38. M. Nosonovsky, B. Bhushan, Multiscale friction mechanisms and hierarchical surfaces in nano- and bio-tribology. J. Mater. Sci. Eng. R 58(3–5), 162–193 (2007)10.1016/j.mser.2007.09.001 ↗
39. Q. Ding, L.P. Wang, L.T. Hu, T.C. Hu, Y. Wang, The pairing-dependent effects of laser surface texturing on micro tribological behavior of amorphous carbon film. Wear 274–275, 43–49 (2012)10.1016/j.wear.2011.08.008 ↗