High strain rate deformation microstructures of stainless steel 316L by cold spraying and explosive powder compaction
Source abstract
Abstract
Cold spraying is a new coating technique in which dense, tightly bonded coatings form only due to the high kinetic energy of impinging particles of the spray powder. These particles are still in the solid state during impact. Explosive powder compaction is a technique where powder is consolidated by a shock wave. In the shock front the powder is deformed under high strain rates, which under suitable conditions results in high-strength bonding of the particles. Thus, the microstructural features obtained by both techniques should be similar. This study correlates the microstructure of cold-sprayed 316L austenitic steel coatings in comparison to the microstructure of 316L samples obtained by explosive compaction. The results provide insight into the prevailing local deformation mechanisms, as well as into the physical background of observed phase transformations.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A.P. Alkhminov, S.V. Klinkov, V.F. Kosarev, A.N. Papyrin, J. Appl. Mech. Tech. Phys. 38, 324 (1997)10.1007/BF02467920 ↗
2. A.P. Alkhminov, V.F. Kosarev, A.N. Papyrin, J. Appl. Mech. Tech. Phys. 39, 318 (1998)10.1007/BF02468100 ↗
3. A.N. Papyrin, A.P. Alkhminov, V.F. Kosarev, S.V. Klinkow, in Thermal Spray 2001: New Surfaces for a New Millennium, ed. by C.C. Berndt, K.A. Khor, E.F. Lugscheider (ASM International, Materials Park, OH, 2001), p. 42310.31399/asm.cp.itsc2001p0423 ↗
4. J. Vlcek, H. Huber, H. Voggenreiter, A. Fischer, E. Lugscheider, H. Hallen, G. Pache, in Thermal Spray 2001: New Surfaces for a New Millennium, ed. by C.C. Berndt, K.A. Khor, E.F. Lugscheider (ASM International, Materials Park, OH, 2001), p. 41710.31399/asm.cp.itsc2001p0417 ↗
5. T. Stoltenhoff, H. Kreye, H.J. Richter, H. Assadi, in Thermal Spray 2001: New Surfaces for a New Millennium, ed. by C.C. Berndt, K.A. Khor, E.F. Lugscheider (ASM International, Materials Park, OH, 2001), p. 40910.31399/asm.cp.itsc2001p0409 ↗
6. T. Stoltenhoff, H. Richter, H. Kreye, J. Thermal Spray Technol. 11, 542 (2002)10.1361/105996302770348682 ↗
7. C. Borchers, T. Stoltenhoff, F. Gärtner, H. Kreye, H. Assadi, Mater. Res. Soc. Proc. 673, 7.10 (2002)
8. C. Borchers, T. Stoltenhoff, F. Gärtner, H. Kreye, H. Assadi, J. Appl. Phys. 93, 10064 (2003)10.1063/1.1573740 ↗
9. R. Prümmer, Explosivverdichtung pulvriger Substanzen: Grundlagen, Verfahren, Ergebnisse (Springer, Berlin, 1987) [in German]10.1007/978-3-642-82903-1 ↗
10. D.A. Raybould, J. Mater. Sci. 16, 589 (1981)10.1007/BF02402774 ↗
11. L.E. Murr, Shock Waves for Industrial Applications (Noyes, Park Ridge, NJ, 1988), p. 237
12. M.A. Meyers, L.E. Murr, J. Met. 33, 21 (1981)
13. D.G. Morris, Mater. Sci. Eng. 57, 187 (1983)10.1016/0025-5416(83)90209-4 ↗
14. T. Schmidt, F. Gärtner, H. Kreye, High strain rate deformation phenomena in explosive powder compaction and cold gas spraying, in International Thermal Spray Conference, Orlando, FL, 2003, ed. by B.R. Marple, C. Moreau (ASM International, Materials Park, OH, 2003), p. 910.31399/asm.cp.itsc2003p0009 ↗
15. H. Kreye, Weld. J. Res. Suppl. 56, 154 (1977)
16. H. Kreye, I. Wittkamp, U. Richter, Z. Metallkd. 67, 141 (1976)
17. M. Hammerschmidt, H. Kreye, in Shock Waves and High Strain-Rate Phenomena in Metals, ed. by M.A. Meyers, L.E. Murr (Plenum, New York, 1981), p. 96110.1007/978-1-4613-3219-0_54 ↗
18. H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, Acta Mater. 51, 4379 (2003)10.1016/S1359-6454(03)00274-X ↗
19. T. Schmidt, F. Gärtner, H. Assadi, H. Kreye, Acta Mater. 54, 729 (2006)10.1016/j.actamat.2005.10.005 ↗
20. C. Borchers, T. Stoltenhoff, F. Gärtner, H. Kreye, J. Appl. Phys. 94, 4288 (2004)10.1063/1.1789278 ↗
21. T. Schmidt, F. Gärtner, H. Kreye, J. Thermal Spray Technol. 15, 488 (2006)10.1361/105996306X147144 ↗
22. K.P. Rao, Mater. Sci. Lett. 9, 675 (1990)10.1007/BF00721800 ↗
23. Y.C. Lin, P.Y. Chen, Mater. Sci. Eng. A 307, 165 (2001)10.1016/S0921-5093(00)01821-9 ↗
24. A. Zambon, B. Badan, K. Eckler, F. Gärtner, A.F. Norman, A.L. Greer, D.M. Herlach, E. Ramous, Acta Mater. 46, 4657 (1998)10.1016/S1359-6454(98)00141-4 ↗
25. R.N. Wright, J.C. Bae, T.F. Kelly, J.E. Flinn, G.E. Korth, Metall. Trans. 195A, 2399 (1988)10.1007/BF02645467 ↗
26. M.A. Meyers, J.C. LaSalvia, V.F. Nestorenko, Y.J. Chen, B.K. Kad, in Proceedings of ReX’96: The Third International Conference on Recrystallization and Related Phenomena, ed. by T.R. McNelley (Monterey Institute of Advanced Studies, Monterey, CA, 1997), p. 279
27. C. Borchers, T. Stoltenhoff, F. Gärtner, H. Kreye, Acta Mater. 53, 2991 (2005)10.1016/j.actamat.2005.02.048 ↗
28. I. Kovacs, L. Zsoldos, Dislocations and Plastic Deformation (Pergamon, Oxford, 1973), p. 249
29. H.J. Frost, M.F. Ashby, Deformation Mechanism Maps (Pergamon, Oxford, 1982)
30. K.S.B. Rose, S.G. Glover, Acta Met. 14, 1505 (1966)10.1016/0001-6160(66)90172-6 ↗
31. J.A. Slane, C. Wolverton, R. Gibala, Mater. Sci. Eng. A 370, 67 (2004)10.1016/j.msea.2003.08.073 ↗
32. P. Haasen, Physical Metallurgy (Cambridge University Press, Cambridge, 1996), p. 28210.1017/CBO9781107295551 ↗
33. C.R. Nave, HyperPhysics 2006, http://hyperphysics.phy-astr.gsu.edu/hbase/tables/soundv.html#c3, accessed 02/23/2006