Preparation and assessment of piezo- and pyroelectric poly (vinylidene fluoride-hexafluoropropylene) copolymer films

Films of poly(vinylidene fluoride-hexafluoropropylene) copolymer [P(VDF-HFP)] were cast from a dimethylsulfoxide (DMSO)/acetone solution of Solef®85-15 P(VDF-HFP) copolymer powder grade 21508. Undrawn and uniaxially drawn cast copolymer films were investigated with respect to their piezo- and pyroelectric properties. Quasistatic charge integration was employed for the determination of the poling-field dependence of the piezoelectric d31 and pyroelectric p3 coefficients. In addition, the thermal stability of the pyroelectric effect was studied with a combination of thermally stimulated discharge (TSD) and temperature-modulation techniques. Cast copolymer films could withstand electrical poling fields of up to 400 MV/m. The maximum values of d31=30 pC/N and p3=49 μC/(m2K) for uniaxially drawn samples are similar to those found on commercial PVDF films and much higher than those on pure PVDF films cast from solution. Samples kept for 5 min at 150 °C still exhibit 30–40% of the initial pyroelectric effect [up to around 20 μC/(m2K)]. After this annealing step, no further decay of the pyroelectric coefficient could be observed during storage at 120 °C for several hours.