Picosecond laser micromachining of nitinol and platinum–iridium alloy for coronary stent applications
Source abstract
Abstract
The demand for micromachining of coronary stents by means of industrial lasers rises quickly for treating coronary artery diseases, which cause more than one million deaths each year. The most widely used types of laser for stent manufacturing are Nd:YAG laser systems with a wavelength of 1064 nm with pulse lengths of 10 -3-10 -2 seconds. Considerable post-processing is required to remove heat-affected zones (HAZ), and to improve surface finishes and geometry. Using a third harmonic laser radiation of picosecond laser (6×10 -12 s pulse duration) in UV range, the capability of the picosecond laser micromachining of nitinol and platinum-iridium alloy for coronary stent applications are presented. In this study dross-free cut of nitinol and platinum-iridium alloy tubes are demonstrated and topography analysis of the cut surface is carried out. The HAZ characteristics have been investigated by means of microscopic examinations and measurement of micro-hardness distribution near the cut zones. © 2011 Springer-Verlag.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Advanced Surface Polishing Techniques · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Y.P. Kathuria, in Proceedings of SPIE, vol. 5399 (2004), pp. 234–24410.1117/12.552988 ↗
2. D. Stoeckel, C. Bonsignore, S. Duda, Minim. Invasive Ther. Allied Technol. 11(4), 137–147 (2002)10.1080/136457002760273340 ↗
3. L. Grenacher, S. Rohde, E. Gänger, J. Deutsch, G.W. Kauffmann, G.M. Richter, Cardiovasc. Interv. Radiol. 29(2), 249–254 (2006)10.1007/s00270-004-0295-y ↗
4. Y.P. Kathuria, in Intl. Symp. on Micromechatronics and Human Science (1998), pp. 111–114
5. A. Raval, A. Choubey, C. Engineer, D. Kothwala, Mater. Sci. Eng. A 386(1–2), 331–343 (2004)10.1016/S0921-5093(04)00974-8 ↗
6. C. Momma, U. Knop, S. Nolte, Biomed. Res. 2, 39–44 (1999)
7. N. Muhammad, D. Whitehead, A. Boor, L. Li, J. Mater. Process. Technol. 210(15), 2261–2267 (2010)10.1016/j.jmatprotec.2010.08.015 ↗
8. J. Jandeleit, A. Horn, R. Weichenhain, E.W. Kreutz, R. Poprawe, Appl. Surf. Sci. 127–129, 885–891 (1998)10.1016/S0169-4332(97)00762-9 ↗
9. U. Klug, F. Siegel, Laser Tech. J. 4(1), 32–35 (2007)10.1002/latj.200790140 ↗
10. H. Huang, H.Y. Zheng, G.C. Lim, Appl. Surf. Sci. 228(1–4), 201–206 (2004)10.1016/j.apsusc.2004.01.018 ↗
11. C. Li, S. Nikumb, F. Wong, Opt. Lasers Eng. 44(10), 1078–1087 (2006)10.1016/j.optlaseng.2005.08.003 ↗
12. I.Y. Chung, J.D. Kim, K.H. Kang, Int. J. Precis. Eng. Manuf. 10(2), 11–16 (2009)10.1007/s12541-009-0021-4 ↗
13. A. Wolynski, T. Herrmann, P. Mucha, H. Haloui, J. L’huillier, Phys. Procedia 12(2), 292–301 (2011)10.1016/j.phpro.2011.03.136 ↗
14. K. Weingarten, Laser Tech. J. 6(3), 51–54 (2009)10.1002/latj.200990041 ↗
15. M. Mielke, G. Gaudiosi, K. Kim, M. Greenberg, X. Gu, R. Cline, X. Peng, M. Slovick, N. Allen, M. Manning, M. Ferrel, N. Prachayaamorn, S. Sapers, J. Laser Micro Nanoeng. 5, 53–58 (2010)10.2961/jlmn.2010.01.0012 ↗
16. J. Meijer, K. Du, A. Gillner, D. Hoffman, V.S. Kovalenko, T. Masuzawa, A. Ostendorf, R. Poprawe, W. Schulz, CIRP Ann. 51(2), 531–550 (2002)10.1016/S0007-8506(07)61699-0 ↗
17. F. Dausinger, H. Hugel, V.I. Konov, in Int. Conf. Advanced Laser Technologies, vol. 5147 (2002), pp. 106–115
18. S. Preuss, A. Demchuk, M. Stuke, Appl. Phys. A, Mater. Sci. Process. 61(1), 33–37 (1995)10.1007/BF01538207 ↗
19. P. Di Pietro, Y.L. Yao, Int. J. Mach. Tools Manuf. 35(7), 993–1002 (1995)10.1016/0890-6955(94)00063-P ↗
20. Y. Terada, K. Ohkubo, T. Mohri, Platin. Met. Rev. 49, 21–26 (2005)10.1595/147106705X24364 ↗
21. E.-A. Giroux, M. Maglione, A. Gueldry, J.-L. Mantoux, J. Phys. D, Appl. Phys. 29, 923–928 (1996)10.1088/0022-3727/29/3/061 ↗
22. W.C. Tan, A.S. Salleh, S. Jamian, M.I. Ghazali, in World Academy of Sci., Eng. Technol., vol. 25 (2007), pp. 304–307
23. E. Kannatey-Asibu Jr., Principles of Laser Materials Processing (Wiley, New Jersey, 2009)10.1002/9780470459300 ↗
24. G.B. James, Design for Manufacturability Handbook (McGraw-Hill, New York, 1999)
25. Y.P. Kathuria, J. Mater. Process. Technol. 170(3), 545–550 (2005)10.1016/j.jmatprotec.2005.05.041 ↗
26. S.K. Sudheer, D. Kothwala, C. Engineer, A. Raval, H. Kotadia, S. Prathibha, J. Micro/Nanolithogr. MEMS MOEMS 7(3), 033012 (2008)
27. H. Zhao, J.V. Humbeeck, J. Sohier, I. De Scheerder, J. Mater. Sci. 13(10), 911–916 (2002)10.1023/A:1019831808503 ↗
28. D. Schuocker, Appl. Phys. B 40, 9–14 (1986)10.1007/BF00697221 ↗