Influence of unburned pulverized coal on gasification reaction of coke in blast furnace
Source abstract
Abstract
Abstract In order to explore the influence of unburned pulverized coal on gasification reaction of coke in blast furnace, kinetic rules of gasification reaction between CO 2 and coke powder adding pulverized coals with different volatiles were studied by thermogravimetric analysis. The results showed that weight-loss ratio of samples reacted with CO 2 increased after adding pulverized coal, and the weight-loss ratio rose with the increase of coal’s addition. When the content of pulverized coal was up to 50%, the weight-loss ratio of the sample which adding pulverized coal with high volatile was higher under the same temperature. The activation energy about C-CO 2 gasification reaction of samples reduced observably after adding pulverized coal. The activation energy of samples had a largest decrease with 83.408 kJ mol− 1 at the range of 1223 K~1373 K and it was 28.97 kJ mol −1 at the range of 1373 K~1523 K. The addition of pulverized coal with high volatile can reduce the reaction activation energy of samples more effectively. In the soft melting zone, the gasification reaction model of coke blocks attached the unburned pulverized coal was up to unreacted core model and porous volume-reacted model jointly.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Iron and Steelmaking Processes · Thermochemical Biomass Conversion Processes · Coal Properties and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials and Metallurgy, Inner Mongolia University of Science and Technology , Baotou 014010 , Baotou , China
References (22)
Show source-provided references
1. L. Lu, V. Sahajwalla, and D. Harris, Metall. Mater. Trans. B., 32(5) (2001) 811-820.10.1007/s11661-001-1016-710.1007/s11663-001-0068-9 ↗
2. J.K. Chung, J.W. Han, and J.H. Lee, Met. Mater. Int., 2(1) (1996) 1-7.10.1007/BF03025940
3. Y.F. Chai, J.L. Zhang, Q.J. Shao, X.J. Ning, and K.D. Wang, High Temp. Mater. Processes, 38 (2019) 42-49.10.1515/htmp-2017-014110.1515/htmp-2017-0141 ↗
4. W.R.Xu, K.Wu, L.L.Zhang, Y.Zhao, F.Zhang, Iron and Steel, 41(4) (2006) 10-14.
5. T. Zheng, K. Wu, W.R. Xu, R.L. Zhu, and W.Z. Jiang, Iron and Steel, 41(3) (2006) 20-24.
6. Q. Zhang, J.H. Yang, Y.L. Li, Coal Convers., 25(1) (2002) 62-66.
7. J.H. Yang, A.Z. Feng, and H.G. Du, Iron and Steel, 36(6) (2001) 5-9.
8. H. Bertling, ISIJ Int., 39(7) (1999) 617-624.10.2355/isijinternational.39.61710.2355/isijinternational.39.617 ↗
9. B. Chakraborty, B.N. Prasad, N.K. Ghosh, L. Parthasarathy, ISIJ Int., 38(8) (1998) 807-811.10.2355/isijinternational.38.80710.2355/isijinternational.38.807 ↗
10. M. Lundgren, R. Khanna, L.S. Ökvist, V. Sahajwalla, and B. Björk-man, Metall. Mater. Trans. B. 45(2) (2014) 603-616.10.1007/s11663-013-9977-710.1007/s11663-013-9977-7 ↗
11. J. Hu, F.S. Kong, X.M. Zhao, J.H. Song, and J.L. Zhang, J. China Coal Soc., 28(4) (2003) 419-422.
12. D.S. Hu and W.Z. Sun, The 9th China Steel Conference, October 23-25, 2013, The Chinese Society for Metals, Beijing, Metallurgical Industry Press, (2013), pp. 1-6.
13. A.W. Coats and J.P. Redfern, Nature, 201 (1964) 68-69.10.1038/201068a010.1038/201068a0 ↗
14. M.J. Starink, Thermochim. Acta, 404(1-2) (2003) 163-176.10.1016/S0040-6031(03)00144-810.1016/S0040-6031(03)00144-8 ↗
15. J.R. Maccallum, J.Tanner, Eur. Polym. J., 6(6) (1970) 907-917.10.1016/0014-3057(70)90014-510.1016/0014-3057(70)90014-5 ↗
16. R.E. Kahrizsangi and M.H. Abbasi, T. Nonferr. Metal. Soc., 18(1) (2008) 217-221.10.1016/S1003-6326(08)60039-410.1016/S1003-6326(08)60039-4 ↗
17. J. Zhou, Z.J. Zhou, X. Gong, and Z.H. Yu, Coal Convers., 25(04) (2002) 66-67.
18. J. Zhou, Z.J. Zhou, X. Gong, and Z.H. Yu, Coal Convers., 26(1) (2003) 78-81.
19. X.H. Huang, Principle of Iron and Steel Metallurgy, Metallurgical Industry Press, Beijing, (2013).
20. H.J. Guo, Tutorials of Physical Chemistry in Metallurgy, Metallurgical Industry Press, Beijing, (2010).
21. R. Guo and Q.Wang, Metall. Res. Technol., 109(6) (2012) 443-452.10.1051/metal/2012039 ↗
22. Q. Wang, Angang Technol., 383 (2013) 1-8.10.1142/9789814508865_0050 ↗