journal article·2020-07

Energy harvesting from a thin polymeric film based on PVDF-HFP and PMMA blend

Kinyas Polat

Applied Physics A· Volume 126· Issue 7
Publisher page

Abstract

Herein, a thin polymeric film prepared by spin coating technique using the blend of poly(vinylidene floride-co-hexafluoropropylene) (PVDF-HFP) and poly(methyl methactrylate) PMMA (1:1 mixing ratio) was introduced and compared with the pure PVDF-HFP. SEM, XRD, FTIR, TGA and DSC characterizations were conducted. Piezoelectric response was measured by hand made setup and the produced signal measured by a digital oscilloscope. Blending with PMMA increased the β-phase content, improved the heat stability. Crystallization point decreased from 140 to 129 °C and glass transition temperature changed from 59 to 94 °C. A uniform porous film structure was obtained with a thickness value of 12 µm. Piezoelectric potential obtained by applying mechanical force was found 4.385 V and 8.101 V for pure PVDF-HFP and the blend film, respectively. 84.7% increase found in the piezoelectric potential could be a promising result for energy harvesting and sensors applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Innovative Energy Harvesting Technologies · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. S. Priya, D.J. Inman (eds.), Energy Harvesting Technologies (Springer, Boston, 2009)
2. A. Harb, Renew. Energy 36, 2641 (2011)10.1016/j.renene.2010.06.014 ↗
3. A. Ghaffarinejad, J. Yavand Hasani, Appl. Phys. A 125, 259 (2019)10.1007/s00339-019-2495-y ↗
4. K. Xia, Z. Zhu, H. Zhang, Z. Xu, Appl. Phys. A 124, 520 (2018)10.1007/s00339-018-1942-5 ↗
5. S.-Y. Yang, J.-F. Shih, C.-C. Chang, C.-R. Yang, Appl. Phys. A 123, 128 (2017)10.1007/s00339-017-0769-9 ↗
6. A. Misra, R. Singh, S.P. Lal, Appl. Phys. A 121, 597 (2015)10.1007/s00339-015-9437-0 ↗
7. H.S. Kim, J.-H. Kim, J. Kim, Int. J. Precis. Eng. Manuf. 12, 1129 (2011)10.1007/s12541-011-0151-3 ↗
8. B. Bagchi, S. Banerjee, A. Kool, P. Thakur, S. Bhandary, N. Amin Hoque, S. Das, Phys. Chem. Chem. Phys. 18, 16775 (2016)10.1039/C6CP03493D ↗
9. M. Baniasadi, Z. Xu, S. Hong, M. Naraghi, M. Minary-Jolandan, A.C.S. Appl, Mater. Interfaces 8, 2540 (2016)10.1021/acsami.5b10073 ↗
10. K. R. Chapagain, W. Bjerke, S. Wagle, T. Melands, F. Melands, in 2017 IEEE International Ultrasonics Symposium IUS (2017), pp. 1–4.
11. J. Chen, J. Zhao, L. Lin, X. Sun, IEEE Sens. J. 20, 113 (2020)10.1109/JSEN.2019.2941980 ↗
12. A. Eddiai, M. Meddad, R. Farhan, M. Mazroui, M. Rguiti, D. Guyomar, Superlattices Microstruct. 127, 20 (2019)10.1016/j.spmi.2018.03.044 ↗
13. J. Gu, H. Yang, F. Fan, M. Su, J. Instrum. 12, P12026 (2017)10.1088/1748-0221/12/12/P12026 ↗
14. W.G. Kaval, R.A. Lake, R. A. Coutu, in Micro Nanomechanics, vol. 5, ed. by L. Starman, J. Hay (Springer International Publishing, Cham, 2018), pp. 11–1710.1007/978-3-319-63405-0_3 ↗
15. J. Ma, Q. Zhang, K. Lin, L. Zhou, Z. Ni, Mater. Res. Express 5, 035057 (2018)10.1088/2053-1591/aab747 ↗
16. K.A.R. Medeiros, E.Q. Rangel, A.R. Sant’Anna, D.R. Louzada, C.R.H. Barbosa, J.R.M. d’Almeida, Oil Gas Sci. Technol. Rev. D’IFP Energ. Nouv 73, 48 (2018)10.2516/ogst/2018058 ↗
17. A.S. Motamedi, H. Mirzadeh, F. Hajiesmaeilbaigi, S. Bagheri-Khoulenjani, M.A. Shokrgozar, J. Biomed. Mater. Res. A 105, 1984 (2017)10.1002/jbm.a.36050 ↗
18. B. Qi, Q. Kong, H. Qian, D. Patil, I. Lim, M. Li, D. Liu, G. Song, Sensors 18, 671 (2018)10.3390/s18020671 ↗
19. S. Abbrent, J. Plestil, D. Hlavata, J. Lindgren, J. Tegenfeldt, Å. Wendsjö, Polymer 42, 1407 (2001)10.1016/S0032-3861(00)00517-6 ↗
20. G. Kang, Y. Cao, J. Membr. Sci. 463, 145 (2014)10.1016/j.memsci.2014.03.055 ↗
21. A. Manuel Stephan, Eur. Polym. J. 42, 21 (2006)10.1016/j.eurpolymj.2005.09.017 ↗
22. L. Wu, W. Yuan, N. Hu, Z. Wang, C. Chen, J. Qiu, J. Ying, Y. Li, J. Phys. Appl. Phys. 47, 135302 (2014)10.1088/0022-3727/47/13/135302 ↗
23. L. Ruan, X. Yao, Y. Chang, L. Zhou, G. Qin, X. Zhang, Polymers 10, 228 (2018)10.3390/polym10030228 ↗
24. S. Ramasundaram, S. Yoon, K.J. Kim, C. Park, J. Polym. Sci. Part B Polym. Phys. 46, 2173 (2008)10.1002/polb.21550 ↗
25. H.C. Bidsorkhi, A.G. D’Aloia, G. De Bellis, A. Proietti, A. Rinaldi, M. Fortunato, P. Ballirano, M.P. Bracciale, M.L. Santarelli, M.S. Sarto, Mater. Today Commun. 11, 163 (2017)10.1016/j.mtcomm.2017.04.001 ↗
26. J. Cai, N. Hu, L. Wu, Y. Liu, Y. Li, H. Ning, X. Liu, L. Lin, Compos. Part Appl. Sci. Manuf. 121, 223 (2019)10.1016/j.compositesa.2019.03.031 ↗
27. C. Chen, F. Cai, Y. Zhu, L. Liao, J. Qian, F.-G. Yuan, N. Zhang, Smart Mater. Struct. 28, 065017 (2019)10.1088/1361-665X/ab15b7 ↗
28. A.L. Gayen, D. Mondal, D. Roy, P. Bandyopadhyay, S. Manna, R. Basu, S. Das, D.S. Bhar, B.K. Paul, P. Nandy, J. Mater. Sci. Mater. Electron. 28, 14798 (2017)10.1007/s10854-017-7349-9 ↗
29. K. Huang, H. Ning, N. Hu, X. Wu, S. Wang, S. Weng, W. Yuan, L. Wu, Y. Liu, Carbon 144, 509 (2019)10.1016/j.carbon.2018.12.059 ↗
30. D. Mondal, A.L. Gayen, B.K. Paul, P. Bandyopadhyay, D. Bera, D.S. Bhar, K. Das, P. Nandy, S. Das, J. Mater. Sci. Mater. Electron. 29, 14535 (2018)10.1007/s10854-018-9588-9 ↗
31. H. Parangusan, D. Ponnamma, M.A.A. Al-Maadeed, Sci. Rep. 8, 1 (2018)10.1038/s41598-017-19082-3 ↗
32. W.-W. Cui, D.-Y. Tang, Y.-S. Lu, N. Zhang, L.-Z. Liu, J.-L. Mu, Iran. Polym. J. 26, 179 (2017)10.1007/s13726-017-0506-4 ↗
33. C.-H. Du, B.-K. Zhu, Y.-Y. Xu, J. Mater. Sci. 41, 417 (2006)10.1007/s10853-005-2182-6 ↗
34. J. Liu, M. Liu, C. He, J. Li, Q. Li, C. Wang, Y. Xi, Ionics 25, 5201 (2019)10.1007/s11581-019-03060-y ↗
35. T. Ma, Z. Cui, Y. Wu, S. Qin, H. Wang, F. Yan, N. Han, J. Li, J. Membr. Sci. 444, 213 (2013)10.1016/j.memsci.2013.05.028 ↗
36. P. Senthil Kumar, A. Sakunthala, M.V. Reddy, M. Prabu, Solid State Ion. 319, 256 (2018)10.1016/j.ssi.2018.02.022 ↗
37. L.N. Sim, S.R. Majid, A.K. Arof, Vib. Spectrosc. 58, 57 (2012)10.1016/j.vibspec.2011.11.005 ↗
38. B. Luo, X. Wang, H. Wang, Z. Cai, L. Li, Compos. Sci. Technol. 151, 94 (2017)10.1016/j.compscitech.2017.08.013 ↗
39. G. Peng, X. Zhao, Z. Zhan, S. Ci, Q. Wang, Y. Liang, M. Zhao, RSC Adv. 4, 16849 (2014)10.1039/C3RA47462C ↗
40. C. Wan, C.R. Bowen, J. Mater. Chem. A 5, 3091 (2017)10.1039/C6TA09590A ↗
41. Q. Meng, W. Li, Y. Zheng, Z. Zhang, J. Appl. Polym. Sci. 116, 2674 (2010)10.1002/app.31777 ↗
42. I.S. Elashmawi, N.A. Hakeem, Polym. Eng. Sci. 48, 895 (2008)10.1002/pen.21032 ↗
43. S.R. Valandro, P.C. Lombardo, A.L. Poli, M.A. Horn Jr., M.G. Neumann, C.C.S. Cavalheiro, Mater. Res. 17, 265 (2014)10.1590/S1516-14392013005000173 ↗
44. National Fire Protection Association and Society of Fire Protection Engineers (eds) SFPE Handbook of Fire Protection Engineering, 3rd ed (National Fire Protection Association; Society of Fire Protection Engineers, Quincy, Mass.: Bethesda, Md, 2002)