Grain growth and defect engineering in ITO by pulsed UV laser annealing: Unlocking high conductivity and transparency on flexible substrates
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Room temperature pulsed laser deposition of aluminum Zinc Oxide (AZO): enabling scalable indium-free transparent conductive oxides10.1002/adfm.202418069 ↗
2. High-performance fully transparent Ga2O3 solar-blind UV photodetector with the embedded indium–tin–oxide electrodes
3. 1.37×102 S·cm−1 p-type conductivity LaCuOS films with a very wide optical transparency window of 400–6000 nm
4. Electrical properties of bulk and interface layers in Sb doped SnO₂ thin films10.1016/j.ceramint.2018.10.131 ↗
5. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
6. Advances in flexible metallic transparent electrodes
7. Effect of ITO target crystallinity on the properties of sputtering deposited ITO films10.1016/j.ceramint.2019.11.110 ↗
8. Effect of the annealing gas and RF power sputtering in the electrical, structural and optical properties of ITO thin films10.21272/jnep.11(2).02010 ↗
9. The effects of film thickness on the electrical, optical, and structural properties of cylindrical, rotating, magnetron-sputtered ITO films10.1016/j.apsusc.2018.01.318 ↗
10. Effects of argon sputtering and UV-ozone radiation on the physico-chemical surface properties of ITO10.1016/j.nimb.2017.07.002 ↗
11. Enhancement of optical transmittance and electrical resistivity of post-annealed ITO thin films RF sputtered on Si10.1016/j.apsusc.2018.03.024 ↗
12. Dual modulation of oxygen vacancies and dopants activation in sputtered ITO transparent conductive electrodes via low-temperature annealing10.1016/j.jallcom.2025.184630 ↗
13. Structural optical and electrical properties of a transparent conductive ITO/Al-Ag/ITO multilayer contact10.3762/bjnano.11.57 ↗
14. Impact of low temperature plasma annealing for flexible, transparent and conductive ITO/PEDOT:PSS composite electrode10.1016/j.jiec.2020.10.021 ↗
15. Layer-by-Layer Assembled Oxide Nanoparticle Electrodes with High Transparency, Electrical Conductivity, and Electrochemical Activity by Reducing Organic Linker-Induced Oxygen Vacancies
16. Bandgap tuning of aluminum-doped indium tin oxide for efficient light-emitting diodes10.1016/j.apsusc.2025.162946 ↗
17. Over 500°C stable transparent conductive oxide for optoelectronics10.1002/inf2.12607 ↗
18. Enhanced uniformity in electrical and optical properties of ITO thin films using a wide thermal annealing system10.1016/j.mssp.2018.01.015 ↗
19. Different crystallization behavior of amorphous ITO film by rapid infrared annealing and conventional furnace annealing technology10.3390/ma16103803 ↗
20. Van der Waals thin-film electronics10.1038/s41928-019-0301-7 ↗
21. Fabrication of ultra-thin 2D covalent organic framework nanosheets and their application in functional electronic devices10.1016/j.ccr.2020.213616 ↗
22. Highly ordered small molecule organic semiconductor thin-films enabling complex, high-performance multi-junction devices10.1021/acs.chemrev.2c00844 ↗
23. Stretchable and transparent conductive PEDOT:PSS-based electrodes for organic photovoltaics and strain sensors applications10.1002/adfm.202001251 ↗
24. Near 90% transparent ITO-based flexible electrode with double-sided antireflection layers for highly efficient flexible optoelectronic devices
25. Research on magnetron sputtering thin films as electrode materials for supercapacitors10.1016/j.cej.2025.161242 ↗
26. Laser annealing enables rapid, degradation-free ambient processing of perovskite solar modules10.1126/science.adx9650 ↗
27. Highly stable ni-based flexible transparent conducting panels fabricated by laser digital patterning10.1002/adfm.201806895 ↗
28. Directly patterned ITO nanoparticle-based transparent electrode using co-solvent-based aerosol jet printing for transparent thin film heaters10.1016/j.cej.2024.154692 ↗
29. High-resolution and high-conductivity electrodes via two-step annealing-enhanced solvent-free patterning of silver nanoparticles10.1002/smll.202506786 ↗
30. Non-vacuum fabrication of conductive, mechanochemically stable, flexible Ni–Cu alloy electrodes with customizable composition ratios via laser digital patterning
31. Embedded nanopattern for selectively suppressed thermal conductivity and enhanced transparency in a transparent conducting oxide film10.1016/j.nanoen.2022.107757 ↗
32. Laser-patterned PEDOT:PSS-aramid nanofiber composite electrodes for in-plane supercapacitors with high performance, shape-diversity and ultrahigh deformation resistance10.1016/j.cej.2023.142209 ↗
33. Ultraviolet nanosecond laser cutting mechanisms of flexible stainless-steel based CIGS solar cells10.1016/j.solener.2025.113603 ↗
34. Toward lossless photovoltaic efficiency of laser-shaped flexible Cu(In,Ga)Se2 solar cells on stainless steel substrates10.1016/j.solener.2023.03.024 ↗
35. Flashlight-material interaction for wearable and flexible electronics10.1016/j.mattod.2021.07.027 ↗
36. Laser annealing of TiO2 electron-transporting layer in perovskite solar cell10.1021/acsami.8b13740 ↗
37. Pulsed current annealing of sputtered amorphous ITO films10.1007/s12598-024-03078-w ↗
38. Selective electrode patterning of ITO films using pulsed ultraviolet laser
39. 355 nm nanosecond ultraviolet pulsed laser annealing effects on amorphous In-Ga-ZnO thin film transistors10.3390/mi15010103 ↗
40. High-performance of laser annealed ITO/Cr-Ag/ITO multilayered thin film for transparent conducting application
41. Optoelectronic and structural properties of multilayer oxide/silver/oxide transparent conducting electrodes using green laser annealing10.1007/s40042-024-01074-y ↗
42. Effects of Mg content and thermal treatments on optoelectronic and bending properties of transparent conductive indium tin oxide/AgMg bi-layer film10.1016/j.tsf.2020.137842 ↗
43. Experimental investigation of laser annealing effects on the optoelectronic performance of ITO/Ag/ITO electrodes prepared by sputtering10.1007/s10854-025-14515-6 ↗
44. Welded silver nanowire networks as high-performance transparent conductive electrodes: Welding techniques and device applications
45. Dielectric-engineered Ag nanowire/dielectric multilayers composite transparent conductive thin films with exceeding 99% transmittance and enhanced stability10.1016/j.ceramint.2026.02.166 ↗
46. Skin-conformal, transparent temperature sensors using freestanding Cr₂O₃-coated Ag nanowire conductive nanomembranes10.1016/j.measurement.2025.120095 ↗
47. Synergistic enhancement of conductivity and stability in Ag nanowire networks via all-liquid-phase welding and cladding10.1016/j.apsusc.2025.165709 ↗
48. Rapid fabrication of transparent conductive films with control-lable sheet resistance on glass substrates by laser annealing of diamond-like carbon films10.1016/j.actamat.2016.03.076 ↗
49. Criteria for choosing transparent conductors10.1557/mrs2000.151 ↗
50. New figure of merit for transparent conductors10.1063/1.323240 ↗
51. Oxygen Vacancy Controlled Hyperbolic Metamaterial Based on Indium Tin Oxide (ITO) Nanotubes with Switchable Optical Properties10.1002/adfm.202407552 ↗
52. Sintering densification behavior of nano-ITO powder with high oxygen vacancy induced via plasma stimulation10.1016/j.ceramint.2024.04.017 ↗
53. 12.42% Monolithic 25.42 cm2 flexible organic solar cells enabled by an amorphous ITO-modified metal grid electrode10.1002/adma.202110276 ↗
54. Fluid driven self-assembly of woven Ag nanowire grid for ultra-flexible transparent electrodes