MXene/carbon based ultra-stable symmetric sodium-ion capacitors for glucose monitoring
Source abstract
Abstract
Biomass-derived activated carbon and MXenes are promising candidates for high-performance electrochemical energy storage owing to their low cost and excellent charge-storage properties. Herein, we demonstrate a unified single-step molten-salt strategy to synthesize a composite of pumpkin seed-derived activated carbon and Ti 3 C 2 T x MXene in a single pot for sodium-ion capacitor (SIC) applications. In this process, biomass is simultaneously carbonized and activated, while Ti 3 AlC 2 MAX phase is etched to yield Ti 3 C 2 T x MXene. The resulting composite (actC@Ti 3 C 2 ) exhibits a highly porous hierarchical structure, enabling enhanced sodium storage capability. The SIC delivers high energy and power densities (43 kg -1 and 10,280 kg -1 , respectively) along with excellent cycling stability, retaining ∼80% of its capacitance after 20,000 cycles with ∼99% Coulombic efficiency. A practical application of SIC was demonstrated by powering a glucometer, highlighting its potential in medical devices. Further, freshly assembled SICs powered a digital timer for over 2 h, while the long cycled (20k) SIC powered it for more than 1 h. The post-characterization of the electrodes suggested that only salt deposition on the active sites leads to the failure of the cells while the material structure is intact. This environmentally friendly, scalable, and cost-effective molten-salt approach provides a simple route for designing carbon-MXene (actC@Ti 3 C 2 ) composites for next-generation electrochemical energy storage systems and sensing devices. • Single-step molten-salt synthesis creates porous carbon-MXene composites for sodium-ion capacitors. • Symmetric capacitor retains eighty percent capacitance after 20,000 stable cycles. • Fresh and cycled capacitors powered glucometers, demonstrating promise for healthcare.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Sodium-ion capacitors: materials, mechanism, and challenges10.1002/cssc.201903440 ↗
2. MXene-based flexible supercapacitors: influence of an organic ionic conductor electrolyte on the performance10.1021/acsami.0c12879 ↗
3. High performance MXene/MnCo2O4 supercapacitor device for powering small robotics10.1021/acsaelm.4c01204 ↗
4. Emerging materials for sodium-ion hybrid capacitors: a brief review10.1021/acsaem.1c02099 ↗
5. Preparation and characterization of hydrogen storage medium (IMO/TPAC) and asymmetric supercapacitor (IMO/TPAC‖TPAC) using imogolite (IMO) and biomass derived activated carbon from tangerine peel (TPAC) for renewable energy storage applications10.1016/j.ijhydene.2023.04.076 ↗
6. 2D-Pnictogens: alloy-based anode battery materials with ultrahigh cycling stability10.1039/C8CS00425K ↗
7. Synergetic interface engineering and space-confined effect in CoSe2@Ti3C2Tx heterostructure for high power and long life sodium ion capacitors10.1016/j.jcis.2024.07.245 ↗
8. Ultrafast and ultrastable Na-ion storage in interface engineered MoS2/MXene nanohybrids with nanoconfinement for high-performance sodium-ion capacitors10.1016/j.cej.2025.159268 ↗
9. Biomass derived hierarchical porous carbon for supercapacitor application and dilute stream CO2 capture10.1016/j.carbon.2022.07.057 ↗
10. Waste biomass-derived activated carbon-supported 0D, 1D, 2D, and 3D nanostructures of copper oxide for hydrogenation reaction: a study on the role of structural properties10.1021/acs.langmuir.4c00852 ↗
11. Green synthesis of biomass-derived activated carbon from wood apple shell for enhanced electrochemical energy storage10.1021/acsomega.5c05285 ↗
12. Carbon nanofiber/conducting polymer hybrids for flexible and wearable energy storage devices
13. A comprehensive evaluation of biomass-derived activated carbon materials for electrochemical applications in zinc-ion hybrid supercapacitors10.1021/acsaem.4c01828 ↗
14. Biomass-derived carbon sponges for use as sodium-ion capacitor electrodes10.1039/D3SE00273J ↗
15. The value chain of sustainable dual carbon sodium ion capacitors10.1002/batt.202400807 ↗
16. MXene/Biomass-derived activated carbon composite for supercapacitor applications10.1016/j.carbon.2025.120101 ↗
17. MXene-bonded activated carbon as a flexible electrode for high-performance supercapacitors10.1021/acsenergylett.8b00718 ↗
18. Smart energy bricks: Ti3C2@Polymer electrochemical energy storage inside bricks by 3D Printing10.1002/adfm.202106990 ↗
19. Unveiling the role of atmospheric plasma treatment in boosting MXene-based heterostructure for supercapattery application10.1016/j.cej.2025.164538 ↗
20. MXene 3D/4D printing: ink formulation and electrochemical energy storage applications10.1002/adfm.202421987 ↗
21. MXene-based materials for electrochemical sodium-ion storage10.1002/advs.202003185 ↗
22. MXene-based anode materials for high performance sodium-ion batteries10.1016/j.jcis.2023.12.065 ↗
23. Recyclable HF-free Ti3C2Tx 3D-printed supercapacitors: their second life in sodium-ion batteries10.1039/D4TA07436J ↗
24. Advances in molten-salt-assisted synthesis of 2D MXenes and their applications in electrochemical energy storage and conversion10.1016/j.cej.2023.144185 ↗
25. Molten salt carbonization and activation of biomass to functional biocarbon10.1002/adsu.202200294 ↗
26. Preparation of covalently functionalized graphene using residual oxygen-containing functional groups10.1021/am100597d ↗
27. The structure of graphitic carbons10.1107/S0365110X51000842 ↗
28. X-ray diffraction patterns of graphite and turbostratic carbon10.1016/j.carbon.2007.03.038 ↗
29. Fourier-transform infrared spectral library of MXenes10.1021/acs.chemmater.4c01536 ↗
30. Preparation of mesoporous activated carbon from jackfruit PPI-1 waste and development of different surface functional groups10.56431/p-957378 ↗
31. The utility of adventitious carbon for charge correction: a perspective from a second multiuser facility10.1002/sia.7360 ↗
32. Defining the nature of adventitious carbon and improving its merit as a charge correction reference for XPS10.1016/j.apsusc.2024.159319 ↗
33. Referencing to adventitious carbon in X-ray photoelectron spectroscopy: can differential charging explain C 1s peak shifts?10.1016/j.apsusc.2022.154855 ↗
34. Effect of electrolyte on the nanostructure of the solid electrolyte interphase (SEI) and performance of lithium metal anodes10.1039/C8EE00364E ↗
35. TiO2 by XPS10.1116/1.1247794 ↗
36. XPS study of the major minerals in bauxite: gibbsite, bayerite and (pseudo-)boehmite10.1016/j.jcis.2005.09.054 ↗
37. Challenges in XPS analysis of PEO-LiTFSI-based solid electrolytes: how to overcome X-ray-induced photodecomposition10.1002/batt.202400161 ↗
38. High performance sodium-ion battery anode using biomass derived hard carbon with engineered defective sites10.1016/j.electacta.2020.137574 ↗
39. Theory of the electrochemical impedance of macrohomogeneous porous electrodes10.1016/0013-4686(93)85083-B ↗
40. Application of the impedance model of de Levie for the characterization of porous electrodes10.1016/S0013-4686(02)00081-6 ↗
41. On porous electrodes in electrolyte solutions: I. Capacitance effects10.1016/0013-4686(63)80042-0 ↗
42. Transmission line models for evaluation of impedance response of insertion battery electrodes and cells10.1016/j.powera.2021.100047 ↗
43. Interpretation of finite‐length‐warburg‐type impedances in supported and unsupported electrochemical cells with kinetically reversible electrodes10.1149/1.2085788 ↗
44. Equivalent circuit and continuum modeling of the impedance of electrolyte-filled pores10.1103/PRXEnergy.2.043006 ↗
45. Rational design of MXene/activated carbon/polyoxometalate triple hybrid electrodes with enhanced capacitance for organic-electrolyte supercapacitors10.1016/j.jcis.2022.04.170 ↗
46. Advanced materials for sodium-ion capacitors with superior energy–power properties: progress and perspectives10.1002/smll.201902843 ↗
47. Electrochemical performance of a self-assembled two-dimensional heterostructure of rGO/MoS2/h-BN10.1039/D0NA00021C ↗
48. High-performance sodium-ion capacitor constructed by well-matched dual-carbon electrodes from a single biomass
49. Cork-derived carbon sheets for high-performance Na-ion capacitors10.1021/acsaem.3c01212 ↗
50. Three-dimensional nitrogen-doped dual carbon network anode enabling high-performance sodium-ion hybrid capacitors10.1016/j.electacta.2021.139791 ↗
51. g-C3N4 templated mesoporous carbon with abundant heteroatoms as high-rate anode material for dual-carbon sodium ion hybrid capacitors
52. Eco-friendly synthesis of 3D disordered carbon materials for high-performance dual carbon Na-Ion capacitors10.1002/cssc.202201046 ↗
53. Sustainable Synthesis of Biomass-Derived Carbon Electrodes with Hybrid Energy-Storage Behaviors for Use in High-Performance Na-Ion Capacitors10.1021/acsaem.9b02166 ↗
54. Spontaneous Growth of 3D Framework Carbon from Sodium Citrate for High Energy- and Power-Density and Long-Life Sodium-Ion Hybrid Capacitors10.1002/aenm.201702409 ↗
55. Sulfur and nitrogen dual-doped carbon nanofiber with enlarged interlayer distance as a superior anode material for sodium-ion capacitors10.1016/j.materresbull.2021.111211 ↗
56. Tunable pseudocapacitance storage of MXene by cation pillaring for high performance sodium-ion capacitors10.1039/C8TA02068J ↗
57. Pseudocapacitance of MXene nanosheets for high-power sodium-ion hybrid capacitors10.1038/ncomms7544 ↗
58. Bistacked titanium carbide (MXene) anodes for hybrid sodium-ion capacitors10.1021/acsenergylett.8b01062 ↗
59. A wholly degradable, rechargeable Zn–Ti3C2 MXene capacitor with superior anti-self-discharge function10.1021/acsnano.9b03650 ↗
60. Two-dimensional vanadium carbide (MXene) as positive electrode for sodium-ion capacitors10.1021/acs.jpclett.5b00868 ↗
61. Upside-down sodium ion capacitor: a non-presodiated system based on Na3V2O2(PO4)2F and biomass derived activated carbon10.1016/j.est.2025.116331 ↗
62. Facile synthesis of layered Li4Ti5O12-Ti3C2Tx (MXene) composite for high-performance lithium ion battery10.1016/j.jelechem.2017.12.079 ↗
63. Novel Li4Ti5O12/Ti3C2Tx nanocomposite as a high rate anode material for lithium ion batteries10.1016/j.jallcom.2017.11.164 ↗
64. In situ growth of Li4Ti5O12 nanoparticles on Ti3C2Tx MXene for efficient electron transfer as high-rate anode of Li ion battery10.1016/j.electacta.2022.140242 ↗
65. Understanding the MXene pseudocapacitance10.1021/acs.jpclett.8b00200 ↗
66. Enhancing capacitance performance of Ti3C2Tx MXene as electrode materials of supercapacitor: from controlled preparation to composite structure construction10.1007/s40820-020-0415-5 ↗
67. Reference binding energies of transition metal carbides by core-level X-ray photoelectron spectroscopy free from Ar+ etching artefacts10.1016/j.apsusc.2017.11.264 ↗
68. Comparative spectra illustrating degradation of CaC2O4⋅H2O during XPS analysis10.1116/11.20141101 ↗
69. X-ray photoelectron spectroscopy as a probe for understanding the potential-dependent impact of fluoroethylene carbonate on the solid electrolyte interface formation in Na/Cu2Sb batteries10.1016/j.jpowsour.2020.229171 ↗
70. Introductory guide to backgrounds in XPS spectra and their impact on determining peak intensities10.1116/6.0000359 ↗
71. Rationalization of the X-ray photoelectron spectroscopy of aluminium phosphates synthesized from different precursors10.1039/C9RA08738A ↗
72. A combined XPS and computational study of the chemical reduction of BMP-TFSI by lithium
73. Comparative surface analysis study of the solid electrolyte interphase formation on graphite anodes in lithium-ion batteries depending on the electrolyte composition10.1002/sia.6139 ↗
74. A critical analysis of the X-ray photoelectron spectra of Ti3C2Tz MXenes10.1016/j.matt.2021.01.015 ↗
75. High resolution XPS of organic polymers: the scienta ESCA300 database (Beamson, G.; Briggs, D.)10.1021/ed070pA25.5 ↗
76. XPS investigation of 5N purity Al thin foils for MEMS devices10.1002/sia.7150 ↗
77. Improving electrolyte sustainability for sodium-ion capacitors by combining a bio-based solvent with a low-fluorine salt10.1002/cssc.202502493 ↗
78. Electrolyte technologies for high performance sodium-ion capacitors10.3389/fchem.2020.00652 ↗
79. A porous graphene–NiFe2O4 nanocomposite with high electrochemical performance and high cycling stability for energy storage applications10.1039/D0NA00440E ↗