Analysis of properties and deformation flow during production of thin-walled spherical parts from aluminum alloy 1580
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Golenkov · 2022
2. Ber · 2018
3. Substantiation of a manufacturing technology of flat rolled products from Al – Mg – Sc based alloys for the aerospace industry10.17580/tsm.2018.07.12 ↗
4. Development of a Mathematical Model of Plate Rolling on Hot Reversing Mills10.4028/www.scientific.net/KEM.746.48 ↗
5. Rolling features of aluminum alloy plates
6. Alloy 1570C — Material for pressurized structures of advanced reusable vehicles of RSC «Energia»
7. Structure and properties of deformed semi-finished products from aluminum alloy 01570C of the Al – Mg – Sc system for the RSC «Energia» product
8. Rheological behavior of 01570 and AA5182 wrought aluminum alloys under hot deformation conditions10.17580/tsm.2019.03.09 ↗
9. 2019
10. Mann · 2020
11. Understanding the behaviour of aluminium alloy Р-1580 sparingly doped with scandium under hot deformation10.17580/tsm.2019.09.13 ↗
12. Deformation behavior during hot processing of the alloy of the Al-Mg system economically doped with scandium10.1007/s00170-021-07338-2 ↗
13. Prospects of Creation of Aluminum Alloys Sparingly Alloyed with Scandium10.1007/s11041-018-0256-8 ↗
14. Effect of microalloying with transition and rare-earth metals of aluminum-magnesium system on mechanical properties in case of heat-mechanical treatment
15. Scandium alloying of aluminum alloys10.1007/s11041-020-00595-0 ↗
16. Some principles of alloying of aluminum alloys with scandium and zirconium in ingot production of deformed semiproducts10.1007/s11041-019-00403-4 ↗
17. The role and prospects of rare earth metals in the development of physical-mechanical characteristics and applications of deformable aluminum alloys10.17516/1999-494X-2015-8-5-636-645 ↗
18. Fujikawa · Kinetics of Precipitation in Al–0,20 Mass % Sc Alloy. Aluminium Alloys. Their Physical and Mechanical Properties, Proc. of the 6th Int. Conf. On Aluminium Alloys, ICAA-6 · 1998 · 2 · 805
19. Effect of grain size on cryogenic mechanical properties of an Al-Mg-Sc Alloy
20. Modeling of structure evolution during hot rolling of aluminum alloys in the software package Deform10.17516/1999-494X-2016-9-6-830-835 ↗
21. Recrystallization features of deformable aluminium-magnesium alloys with scandium, Bulletin of the South Ural State University
22. Effects of Sc addition on the microstructure and mechanical properties of cast Al-3Li-1.5Cu-0.15Zr alloy10.1016/j.msea.2016.10.063 ↗
23. High strain rate superplasticity in an Al–Mg–Sc–Zr alloy processed via simple rolling10.1016/j.msea.2017.01.091 ↗
24. Al3(Sc,Zr)-based precipitates in Al–Mg alloy: effect of severe deformation10.1016/j.actamat.2016.10.064 ↗
25. Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate10.1016/j.msea.2017.01.020 ↗
26. Development of a high temperature high strength Al alloy by addition of small amounts of Sc and Mg to 2219 alloy10.1016/j.msea.2017.01.037 ↗
27. Large size metal-clad ingots rolling process analysis using finite elements method10.17516/1999-494X-0064 ↗
28. Investigation of mechanical properties of cold-rolled, annealed and welded semi-finished products from the test alloys of Al-Mg system, economically alloyed with scandium
29. Study of strength properties of semi-finished products from economically alloyed high-strength aluminium-scandium alloys for application in automobile transport and shipbuilding10.1515/eng-2018-0005 ↗
30. Developing, simulating, and researching a production process of long deformed semi-fabricated aluminum–magnesium products with a varying scandium content10.3103/S1067821220010150 ↗
31. Modeling and investigation of the process of hot rolling of large-sized ingots from aluminum alloy of the al-mg system economically alloyed by scandium10.4028/www.scientific.net/MSF.943.58 ↗
32. Influence of rolling and annealing modes on properties of sheet semifinished products made of wrought aluminum alloy 158010.3103/S1067821220060115 ↗
33. Investigation of cold rolling modes of 1580 alloy by the method of computer simulation10.1007/s00170-020-06570-6 ↗
34. Simulation of Process Rolling Plates from Alloy of Al-Mg System Economically Doped with Scandium10.4028/www.scientific.net/SSP.316.509 ↗
35. Modeling of casting technology of large-sized ingots from deformable aluminum alloys10.1007/s00170-022-08817-w ↗
36. 2016
37. Investigation the structure in cast and deformed states of aluminum alloy, economically alloyed with scandium and zirconium10.1007/s00170-021-07206-z ↗
38. Effect of layered heterogeneous microstructure design on the mechanical behavior of medium carbon steel10.1016/j.matdes.2022.110953 ↗
39. Effect of continuity of annealing time on the recrystallization behavior of Al-Mg-Mn-Sc-Zr alloy10.1016/j.matlet.2020.128208 ↗
40. Recrystallization behavior of Al-Mg-Mn-Sc-Zr alloy based on two different deformation ways10.1016/j.matlet.2020.127455 ↗
41. Investigation of the hardening behavior during recrystallization annealing in Al-Mg-Sc alloy10.1016/j.jallcom.2020.157807 ↗
42. Hardening behavior of Al-0.25Sc and Al-0.25Sc-0.12Zr alloys during isothermal annealing10.1016/j.jallcom.2019.152922 ↗
43. Exploring nonlinear strengthening in polycrystalline metallic materials by machine learning methods and heterostructure design10.1016/j.ijplas.2023.103587 ↗
44. Ambient- and high-temperature mechanical properties of isochronally aged Al–0.06Sc, Al–0.06Zr and Al–0.06Sc–0.06Zr (at.%) alloys10.1016/j.actamat.2010.10.017 ↗
45. Phase Composition, Structure, and Hardening of Alloys Containing 6% (Ca + Si) in the System Al–Ca–Si–Zr–Sc10.1134/S0031918X18120037 ↗
46. Structure, phase composition, and strengthening of cast Al–Ca–Mg–Sc alloys10.1134/S0031918X16020046 ↗
47. New eutectic type Al alloys based on the Al-Ca-La(-Zr, Sc) system
48. Phase Composition and Hardening of Castable Al – Ca – Ni – Sc Alloys Containing 0.3% Sc10.1007/s11041-017-0106-0 ↗
49. Effect of Sc/Zr ratio on the microstructure and mechanical properties of new type of Al–Zn–Mg–Sc–Zr alloys10.1016/j.msea.2014.08.041 ↗
50. Morphological characteristics of Al3Sc particles and crystallographic orientation relationships of Al3Sc/Al interface in cast Al-Sc alloy10.1016/j.jallcom.2020.158491 ↗
51. High strain rate superplasticity in an Al–Mg–Sc–Zr alloy processed via simple rolling10.1016/j.msea.2017.01.091 ↗
52. Phase transformations in isochronally annealed mould-cast and cold-rolled Al–Sc–Zr-based alloy
53. Effect of solidification cooling rate on kinetics of continuous/discontinuous Al3(Sc,Zr) precipitation and the subsequent age-hardening response in cold-rolled AlMgSc(Zr) sheets10.1016/j.msea.2019.138693 ↗
54. Multiscale characterization of the nucleation and 3D structure of Al3Sc phases using electron microscopy and synchrotron X-ray tomography10.1016/j.matchar.2020.110353 ↗
55. Experimental investigation of the formability of ultrahigh-strength sheet material using local heat treatment10.1080/03019233.2019.1680176 ↗
56. Influence of boundary conditions on the prediction of springback and wrinkling in sheet metal forming10.1016/j.ijmecsci.2017.01.037 ↗
57. Ber · 2023
58. Development of a method for obtaining thin-walled parts of a spherical shape from aluminum alloy 158010.17580/tsm.2023.07.11 ↗